This feature article summarizes the synthesis of novel olefin block copolymers using fast syndiospecific living homo- and copolymerization of propylene, higher 1-alkene, and norbornene with ansa-fluorenylamidodimethyltitaniumbased catalyst according to the authors' recent results. The catalytic synthesis of monodisperse polyolefin and olefin block copolymer was also described using this living system.

In this paper, we review our recent progress in the synthesis and application of styryl-capped polypropylene (PP-t-St), an excellent reactive polyolefin that is both convenient and efficient in synthesis and facile and versatile in application for preparing advanced polypropylene materials via macromolecular engineering. The synthesis of PP-t-St is made possible by a unique chain transfer reaction coordinated by a bis-styrenic molecule, such as 1,4-divinylbenzene (DVB) and 1,2-bis(4-vinylphenyl)ethane (BVPE), and hydrogen in typical C₂-symmetric metallocene (e.g. rac-Me₂Si(2-Me-4-Ph-Ind)₂ZrCl₂, in association with methylaluminocene, MAO) catalyzed propylene polymerization. The regio-selective 2,1- insertion of the styrenic double bond in DVB or BVPE into the overwhelmingly 1,2-fashioned Zr-PP propagating chain enables substantial dormancy of the catalyst active site, which triggers selective hydrogen chain transfer that, with the formed Zr-H species ultimately saturated by the insertion of propylene monomer, results in an exclusive capping of the afforded PP chains by styryl group at the termination end. With a highly reactive styryl group at chain end, PP-t-St has been used as a facile building block in PP macromolecular engineering together with the employment of state-of-the-art synthetic polymer chemistry to fabricate broad types of new polypropylene architectures.

A series of unsymmetrical α-diimine nickel complexes with various backbones and substituted aniline moieties were synthesized and characterized. The crystallographic analysis of the nickel complexes confirmed the existence of meso-and rac-configuration in solid structure. Nickel complexes after activation by MAO were screened for ethylene polymerization to evaluate backbone substituent effect on synthesis of bimodal PE. Acenaphthyl nickel complex with planar backbone afforded a bimodal PE with a broad polydispersity, whereas camphyl nickel complex with rigid and bulky backbone afforded a monomodal PE with a narrow polydispersity. Steric effect of aniline moiety for acenaphthyl nickel complex was also examined, and bimodal PE with dominant high-molecular-weight fraction was obtained by modifying substituents on aniline moiety.

The ethylene/cyclopentadiene (CPD) copolymerization behavior by using fluoro-substituted bis(β-enaminoketonato) titanium complexes [FC₆H₄NC(CH₃)CHCO(CF₃)]₂TiCl₂ (1a−1c) has been investigated in detail. Upon utilizing MMAO as a cocatalyst, complexes 1a−1c exhibit high catalytic activities, affording the copolymers with high molecular weight and unimodal molecular weight distribution. Compared with non-substituted complex [C₆H₅NC(CH₃)CHCO(CF₃)]₂TiCl₂ (1), complexes 1a−1c can produce the copolymers with CPD incorporation adjusted in a wide range due to the enhancement of electrophilicity of metal center caused by introducing electron-withdrawing groups. Especially complex 1c bearing fluorine at the para-position of N-aryl moiety provides the highest CPD incorporation, which is nearly two times (18.5 mol%) higher than the non-substituted complex 1 (8.9 mol%) under the same conditions. The highest CPD incorporation up to 24.6 mol% can be easily achieved using this complex. ¹H- and ¹³C-NMR spectra demonstrate that these fluoro-substituted complexes possess regioselective nature with exclusive 1,2-insertion fashion, and alternating ethylene-CPD sequence can be detected at high CPD incorporation.

In this article, the effect of diethylaluminum chloride (DEAC) in propylene polymerization with MgCl₂-supported Ziegler-Natta catalyst was studied. Addition of DEAC in the catalyst system caused evident change in catalytic activity and polymer chain structure. The activity decrease in raising DEAC/Ti molar ratio from 0 to 2 is a result of depressed production of isotactic polypropylene chains. The number of active centers in fractions of each polymer sample was determined by quenching the polymerization with 2-thiophenecarbonyl chloride and fractionating the polymer into isotactic, mediumisotactic and atactic fractions. The number of active centers in isotactic fraction ([C_i^*]/[Ti]) was lowered by increasing DEAC/Ti molar ratio to 2, but further increasing the DEAC/Ti molar ratio to 20 caused marked increase of [C_i^*]/[Ti]. The number of active centers that produce atactic and medium-isotactic PP chains was less influenced by DEAC in the range of DEAC/Ti = 0−10, but increased when the DEAC/Ti molar ratio was further raised to 20. The propagation rate constant of C_i^* (k_pi) was evidently increased when DEAC/Ti molar ratio was raised from 0 to 5, but further increase in DEAC/Ti ratio caused gradual decrease in k_pi. The complicated effect of DEAC on the polymerization kinetics, catalysis behaviors and polymer structure can be reasonably explained by adsorption of DEAC on the central metal of the active centers or on Mg atoms adjacent to the central metal.

The formations of defective MgCl₂ surfaces, and subsequent adsorption of Ti species and electron donor, as well as propylene polymerization over the Ziegler-Natta catalyst have been investigated using density functional theory (DFT) method. Twelve possible support models of regular and defective MgCl₂ (110) and (100) surfaces were built. The individual adsorptions of titanium chlorides as mononuclear or dinuclear, and ethyl benzoate (EB) as electron donor, on these models were evaluated. The analysis of energies presented the cases of EB adsorption were generally more stable than titanium chlorides on both surfaces. Thus, EB as internal electron donor mainly prevented TiCl₄ from coordinating on the MgCl₂ surfaces where mostly non-stereospecific active sites could be formed. Exceptionally, A5 the site model with terminal Cl-vacancy on the MgCl₂ support, presented stronger adsorption of TiCl₄ than that of EB on (110) surface. Since the TiCl₄ and ethyl benzoate (EB) would compete to adsorb on the support surface, it seems reasonable to assume that TiCl₄ might predominately occupy this site, which can act as the most plausible active site for propylene polymerization. The first insertion of propylene monomer into the A5 active site model showed that it exhibited good regioselectivity but poor stereospecificity in the absence of electron donor.

A series of half-titanocene chloride 2-(benzimidazol-2-yl)quinolin-8-olates C1−C6 were synthesized by treating the lithium salts of the ligand with CpTiCl₃. All the complexes were characterized by ¹H-NMR, ¹³C-NMR and elemental analyses, and the crystal structure of C3 and C6 was measured by X-ray. These half-titanocene complexes showed moderate catalytic activities toward ethylene polymerization (up to 1840 kg·mol⁻¹(Ti)·h⁻¹) when activated with MMAO, affording the high molecular weight polymers. And they also exhibited good activity for copolymerization of ethylene and α-olefin with low content of co-monomer.

The preparation of the poly(3-hexylthiophene) (P3HT) stripe structure with oriented nanofibrils prepared by controlled inclining evaporative technique is reported. The distance of the adjacent stripes could be controlled from 40 μm to 100 μm by decreasing the inclining angle. The oriented nanofibrils in the stripes can be obtained because the P3HT lamellae diffuse directionally and form 1D crystals at the three-phase contact line of the drop. In order to get the oriented P3HT stripes, the proper solvent evaporation rate which is controlled by the inclining angle and the wettability of the substrate must be carefully chosen to match the P3HT 1D crystallization rate. It is found that large inclining angle and the hydrophilic substrate (for example: glass and PEDOT) are beneficial to get P3HT stripe structure with oriented nanofibrils.

Novel acetylenes carrying urea groups, 1-(4-ethynylphenyl)-3-(4-nitrophenyl) urea (1), 1-(4-propargyl)-3-(4- nitrophenyl) urea (2), were synthesized and polymerized with rhodium catalyst. Polymers [poly(1) and poly(2)] with moderate molecular weights were obtained in good yields. The anion sensing ability of poly(1) and poly(2) was estimated using the tetra-n-butylammonium (TBA) salts of a series of anions in DMF. Upon the addition of F^–, the color of the DMF solution of poly(1) and poly(2) immediately turned to a different color, while the color of solution changed slightly upon addition of Cl^–, HSO₄^–, Br^–, and NO₃^–, indicating the F^– sensing ability of poly(1) and poly(2). The ¹H-NMR titrations of poly(1) revealed that the colorimetric response of poly(1) was triggered by the urea/F^– interaction through the hydrogen bonding and/or deprotonation process. The absorption spectra titration and Hill plot analysis were carried out to measure the F^– binding ability, and the Hill coefficient in the poly(1)/F^– complexation was found to be 5.8. This result clearly indicated that this binding mode between poly(1) and F^– was based on a positive homotropic allosterism.

In this study, a novel H-bonded cholesteric polymer film responding to temperature and pH by changing the reflection color was fabricated. The H-bonded cholesteric polymer film was achieved by UV-photopolymerizing a cholesteric liquid crystal (Ch-LC) monomers mixture containing a photopolymerizable chiral H-bonded assembly (PCHA). The cholesteric polymer film based on PCHA can be thermally switched to reflect red color from the initial green/yellow color as temperature is increased, which is due to a change in helical pitch induced by the weakening of H-bonded interaction in the polymer film. Additionally, the selective reflection band (SRB) of the cholesteric polymer film in solution with pH > 7 showed an obvious red shift with increasing pH values. While the SRB of the cholesteric polymer film in solutions with pH = 7 and pH < 7 hardly changed. This pH sensitivity in solutions with pH > 7 could be explained by the breakage of H-bonds in the cholesteric polymer film and the structure changes induced by —OH⁻ and —K⁺ ions in the alkaline solution. In contrast, it couldn't happen in the neutral and acidic solutions. The cholesteric polymer film in this study can be used as optical/photonic papers, optical sensors and LCs displays, etc.

Solid polymer electrolyte films containing poly(vinyl alcohol) (PVA) and magnesium nitrate (Mg(NO₃)₂) were prepared by solution casting technique and characterized by using XRD, FTIR, DSC and AC impedance spectroscopic analysis. The amorphous nature of the polymer electrolyte films has been confirmed by XRD. The complex formation between PVA and Mg salt has been confirmed by FTIR. The glass transition temperature decreases with increasing the Mg salt concentration. The AC impedance studies are performed to evaluate the ionic conductivity of the polymer electrolyte films in the range of 303−383 K, and the temperature dependence seems to obey the Arrhenius behavior. Transport number measurements show that the charge transport is mainly due to ions. Electrochemical cell of configuration Mg/(PVA + Mg(NO₃)₂) (70:30)/(I₂ + C + electrolyte) has been fabricated. The discharge characteristics of the cell were studied for a constant load of 100 kΩ.

Modified chitosans with 3,4-di-hydroxy benzoyl groups (CS-DHBA) and 3,4,5-tri-hydroxy benzoyl groups (CSTHBA) were synthesized and their nanoparticles were prepared via ionic crosslinking by tripolyphosphate (TPP). The chemical structure and degree of substitution (DS) of di- and tri-hydroxy benzoyl chitosans are determined by FTIR and ¹HNMR spectroscopy. The morphology of particles, size distribution and zeta potential of nanoparticles were studied using transmission electron microscopy (TEM) and dynamic light scattering (DLS), respectively. The mean diameters of particles of CS-DHBA and CS-THBA nanoparticles were 144 nm and 112 nm, respectively. It was found that the particles size decreased slightly with decreasing the degree of substitution and increasing degree of deacetylation (DD), due to increasing of ionic crosslinking of ammonium ions and polyanions of tripolyphosphate. The TEM photographs of CS-DHBA show that these particles are spherical in shape, but the particles of CS-THBA show some aggregation. In addition, the solubility and the mechanical properties of the prepared modified chitosans and their nanoparticles were evaluated for bio-adhesive and biomedical application. The results of solubility tests indicated that, the CS-DHBA and CS-THBA have higher solubility at pH > 7 comparing to CS. Also the CS-DHBA, CS-THBA and their nanoparticles showed a significant adhesive capacity and enhanced tensile strength and tensile modulus.

Rubber compounds based on styrene-butadiene rubber/ethylene propylene diene monomer blends of different compositions (60/40, 70/30, 80/20, 90/10, 100/0) reinforced with 1 wt%, 3 wt%, 5 wt% and 7 wt% organoclay (Cloisite 20A) were prepared on a two roll mill via a vulcanization process and characterized by several techniques. Results of X-ray diffraction showed expansion of the inter-gallery distance, and transmission electron microscopy (TEM) micrographs confirmed that the prepared nanocomposite samples have intercalated and partially exfoliated structures. Cure characteristics showed that, organoclay not only accelerates the vulcanization reaction, but also gives rise to a marked increase of the torque, indicating crosslink density of the prepared compounds increases at the presence of organoclay. Mechanical properties of samples received markedly increase by clay loading due to the good interaction established between nanoclay particles and polymer matrix as it was evidenced by SEM photomicrographs. At the same time, rheological properties showed that addition of nanoclay could improve storage modulus as well as complex viscosity of SBR/EPDM samples. The results of ozone test revealed that the ozone resistance of samples significantly increases as nanoclay or EPDM content increases.

Biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/graphene nanosheet (GNS) composites were prepared via a solution-casting method at low GNS loadings in this work. Transmission electron microscopy revealed that a fine dispersion of GNSs was achieved in the PHBV matrix. The thermal properties of the nanocomposites were investigated by thermogravimetric analysis, and the results showed that the thermal stability of PHBV was significantly improved with a very low loading of GNSs. Nonisothermal melts crystallization behavior, spherulitic morphology and crystal structure of neat PHBV and the PHBV/GNSs nanocomposites were investigated, and the experimental results indicated that crystallization behavior of PHBV was enhanced by the presence of GNSs due to the heterogeneous nucleation effect; however, the two-dimensional (2D) GNSs might restrict the mobility of the PHBV chains in the process of crystal growing. Dynamic mechanical analysis studies showed that the storage modulus of the PHBV/GNSs nanocomposites was greatly improved.

Three diamine monomers with different derivatives of imidazole heterocyclic ring and meta-linked aryl ethers were synthesized and used in polycodensation reaction with various commercial dianhydrides for preparation of a series of novel poly(ether-imide) (PEI)s. The polycodensation reactions were carried out by using conventional method and in a green medium of ionic liquid (IL) without using NMP-pyridine-acetic anhydride. The PEIs were obtained in good yields (80%−96%) with moderate viscosity (0.48−0.66 dL/g) in a shorter reaction time (10 h) in IL as compared with the conventional method (36 h). All of the polymers were amorphous in nature, showed excellent solubility in amide-type polar aprotic solvents with ability to form tough and flexible films, and excellent thermal stability with T_gs in the range of 212−340℃ and 10% weight loss temperature (T10) up to 570℃ in N2 and 528℃ in air.

A series of double-hydrophilic double-grafted PMA-g-PEG/PDMA copolymers, which contained poly(methacrylate) (PMA) as backbone, poly(ethylene glycol) (PEG) and poly(N,N-dimethylacrylamide) (PDMA) as side chains synthesized successfully by using reversible addition-fragmentation chain transfer (RAFT) polymerization and atom transfer radical polymerization (ATRP), were used as physical coatings for the evaluation of protein-resistant properties by capillary electrophoresis (CE). Electroosmotic flow (EOF) measurement results showed that the PMA-g-PEG/PDMA copolymer coated capillaries could suppress electroosmotic mobility in a wide pH range (pH = 2.8−9.8) and EOF mobility decreased with the increase of copolymer molecular mass and PDMA content. At the same time, protein recovery, theoretical plate number of separation and repeatability of migration time demonstrated that antifouling efficiency was improved with the increase of molecular mass and PEG content.

The "living'/controlled radical polymerization (LRP) of styrene (St) at room temperature is rarely reported. In this work, copper(0) (Cu(0))-mediated radical polymerization of St at room temperature was investigated in detail. Dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF) as well as a binary solvent, tetrahydrofuran/1,1,1,3,3,3-hexafluoro-2- propanol were used as the solvents, respectively. Methyl-2-bromopropionate and ethyl 2-bromoisobutyrate were used as the initiators, respectively. The polymerization proceeded smoothly with moderate conversions at room temperature. It was found that DMF was a good solvent with the essential features of LRP, while DMSO was a poor solvent with uncontrollable molecular weights. Besides, the match among the initiator, solvent and molar ratios of reactants can modulate the livingness of the polymerization, and the proper selection of ligand was also crucial to a controlled process. This work provided a first example of Cu(0)-mediated radical polymerization of St at room temperature, which would enrich and strength the LRP technique.