Unleashing the Power of Bio-based Thermotropic Liquid Crystal Modifiers: Toughening and Reinforcing Petroleum-based Epoxy Resin without Compromising Other Properties

Qing-Yun Lu; Hong-Wei Gu; Jia-Hui Li; Qian-Qian Fan; Bei-Tao Liu; Yan Kou; Xi-Gao Jian; Zhi-Huan Weng

doi:10.1007/s10118-024-3149-x

Your Location：

Home >

Browse articles >

Unleashing the Power of Bio-based Thermotropic Liquid Crystal Modifiers: Toughening and Reinforcing Petroleum-based Epoxy Resin without Compromising Other Properties

RESEARCH ARTICLE | Updated：2024-08-06

- Unleashing the Power of Bio-based Thermotropic Liquid Crystal Modifiers: Toughening and Reinforcing Petroleum-based Epoxy Resin without Compromising Other Properties
- Chinese Journal of Polymer Science Vol. 42, Issue 8, Pages: 1093-1102(2024)
- Affiliations：
  
  a.State Key Laboratory of Fine Chemicals, Frontiers Science Center for Smart Materials, Liaoning Technology Innovation Center of High Performance Resin Materials, Department of Polymer Science & Engineering, Dalian University of Technology, Dalian 116024, China
  b.Thermochemistry Laboratory, Liaoning Province Key Laboratory of Thermochemistry for Energy and Materials, Dalian National Laboratory for Clean Energy, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023, China
- Author bio：
  
  kouyan@dicp.ac.cn (Y.K.)
  zweng@dlut.edu.cn (Z.H.W.)
- Funds：
- DOI：10.1007/s10118-024-3149-x
  CLC：
- Received：14 March 2024，
  
  Revised：2024-04-14，
  
  Accepted：24 April 2024，
  
  Online First：26 June 2024，
  
  Published：01 August 2024
- Accepted：
Scan QR Code
Lu, Q. Y.; Gu, H. W.; Li, J. H.; Fan, Q. Q.; Liu, B. T.; Kou, Y.; Jian, X. G.; Weng, Z. H. Unleashing the power of bio-based thermotropic liquid crystal modifiers: toughening and reinforcing petroleum-based epoxy resin without compromising other properties. Chinese J. Polym. Sci. 2024, 42, 1093–1102

Qing-Yun Lu, Hong-Wei Gu, Jia-Hui Li, et al. Unleashing the Power of Bio-based Thermotropic Liquid Crystal Modifiers: Toughening and Reinforcing Petroleum-based Epoxy Resin without Compromising Other Properties[J]. Chinese Journal of Polymer Science, 2024, 42(8): 1093-1102.
Lu, Q. Y.; Gu, H. W.; Li, J. H.; Fan, Q. Q.; Liu, B. T.; Kou, Y.; Jian, X. G.; Weng, Z. H. Unleashing the power of bio-based thermotropic liquid crystal modifiers: toughening and reinforcing petroleum-based epoxy resin without compromising other properties. Chinese J. Polym. Sci. 2024, 42, 1093–1102 DOI： 10.1007/s10118-024-3149-x.

Qing-Yun Lu, Hong-Wei Gu, Jia-Hui Li, et al. Unleashing the Power of Bio-based Thermotropic Liquid Crystal Modifiers: Toughening and Reinforcing Petroleum-based Epoxy Resin without Compromising Other Properties[J]. Chinese Journal of Polymer Science, 2024, 42(8): 1093-1102. DOI： 10.1007/s10118-024-3149-x.

摘要

A bio-based thermotropic liquid crystal epoxy resin (THMT-EP) was used to modify petroleum-based epoxy resin (E51)

which significantly improved the impact strength of the blended system

as well as the thermal stability

mechanical strength

and flame retardant properties. It addressed the dilemma of sacrificing other properties for toughened epoxy resin.

Abstract

Toughening the petroleum-based epoxy resin blends with bio-based modifiers without compromising their modulus

mechanical strength

and other properties is still a big challenge in view of the sustainability. In this study

a bio-based liquid crystal epoxy resin (THMT-EP) with an

-triazine ring structure was utilized to modify a petroleum-based bisphenol A epoxy resin (E51) with 4

4'-diaminodiphenylsulfone (DDS) as a curing agent

and the blended systems were evaluated for their thermal stability

mechanical properties

and flame retardancy. The results showed that the impact strength of the blended system initially increased and then decreased with the increase in THMT-EP content

and it reached the a maximum value of 26.5 kJ/m

when the THMT-EP content was 5%

which was 31.2% higher than that of E51/DDS. Notably

the flexural strength

modulus

and glass transition temp

erature of the blended system were all simultaneously improved with the addition of THMT-EP. At the same time

the addition of THMT-EP enhanced the flame retardancy of the system by increasing the char yield at 700 °C and decreasing the peak heat release rate and total heat release rate. This work paves the way for a more sustainable improvement in the comprehensive performance of epoxy resin.

关键词

Keywords

references

Yang, X.; Wang, C. P.; Xia, J. L.; Mao, W.; Li, S. H. Study on synthesis of novel phosphorus-containing flame retardant epoxy curing agents from renewable resources and the comprehensive properties of their combined cured products. Prog. Org. Coat. 2017 , 110 , 195−203..

Che n, B.; Wu, Q.; Li, J.; Lin, K. D.; Chen, D. C.; Zhou, C. L.; Wu, T.; Luo, X. H.; Liu, Y. L. A novel and green method to synthesize a epoxidized biomass eucommia gum as the nanofiller in the epoxy composite coating with excellent anticorrosive performance. Chem. Eng. J. 2020 , 379 , 122323−122335..

Qin, B.; Zhang, S.; Sun, P.; Tang, B. H.; Yin, Z.; Cao, X.; Chen, Q.; Xu, J. F.; Zhang, X. Tough and multi-recyclable cross-linked supramolecular polyureas via incorporating noncovalent bonds into main-chains. Adv. Mater. 2020 , 32 , 2000096−2000102..

Abu Bakar, R.; Hepburn, K. S.; Keddie, J. L.; Roth, P. J. Degradable, ultraviolet-crosslinked pressure-sensitive adhesives made from thioester-functional acrylate copolymers. Angew. Chem. Int. Ed. 2023 , 62 , e202307009..

Zhong, L. Y.; Hao, Y. X.; Zhang, J. H.; Wei, F.; Li, T. C.; Miao, M. H.; Zhang, D. H. Closed-loop recyclable fully bio-based epoxy vitrimers from ferulic acid-derived hyperbranched epoxy resin. Macromolecules 2022 , 55 , 595−607..

Huo, S. Q.; Sai, T.; Ran, S. Y.; Guo, Z. H.; Fang, Z. P.; Song, P. A.; Wang, H. A hyperbranched P/N/B-containing oligomer as multifunctional flame retardant for epoxy resins. Compos. Part B-Eng. 2022 , 234 , 109701−109712..

Wang, H. G.; Lu, R. J.; Yan, J.; Peng, J. S.; Tomsia, A. P.; Liang, R.; Sun, G. X.; Liu, M. J.; Jiang, L.; Cheng, Q. F. Tough and conductive nacre-inspired MXene/epoxy layered bulk nanocomposites. Angew. Chem. Int. Ed. 2022 , 62 , e202216874..

Wu, Y. M.; Ye, K.; Liu, Z. D.; Wang, B.; Yan, C.; Wang, Z. W.; Lin, C. T.; Jiang, N.; Yu, J. H. Cotton candy-templated fabrication of three-dimensional ceramic pathway within polymer composite for enhanced thermal conductivity. ACS Appl. Mater. Interfaces 2019 , 11 , 44700−44707..

Li, J.; Zhang, Z.; Zhang, Y.; Sun, F.; Wang, D.; Wang, H.; Jin, Z. Synergistic effect of lignin and ethylene glycol crosslinked epoxy resin on enhancing thermal, mechanical and shape memory performance. Int. J. Biol. Macromol. 2021 , 192 , 516−524..

Zhang, A. L.; Zhang, J. Z.; Liu, L.; Dai, J. F.; Lu, X. Y.; Huo, S. Q.; Hong, M.; Liu, X. H.; Lynch, M.; Zeng, X. S.; Burey, P.; Song, P. G. Engineering phosphorus-containing lignin for epoxy biocomposites with enhanced thermal stability, fire retardancy and mechanical properties. J. Mater. Sci. Technol. 2023 , 167 , 82−93..

Peng, W.; Xu, Y. X.; Nie, S. B.; Yang, W. A bio-based phosphaphenanthrene-containing derivative modified epoxy thermosets with good flame retardancy, high mechanical properties and transparency. RSC Adv. 2021 , 11 , 30943−30954..

Gao, T. Y.; Wang, F. D.; Xu, Y.; Wei, C. X.; Zhu, S. E.; Yang, W.; Lu, H. D. Luteolin-based epoxy resin with exceptional heat resistance, mechanical and flame retardant properties. Chem. Eng. J. 2022 , 428 , 131173−131184..

Li, J.; Aung, H. H.; Du, B. Curing regime-modulating insulation performance of anhydride-cured epoxy resin: a review. Molecules 2023 , 28 , 547−559..

Auvergne, R.; Caillol, S.; David, G.; Boutevin, B.; Pascault, J. P. Biobased thermosetting epoxy: present and future. Chem. Rev. 2013 , 114 , 1082−1115..

Kou, Y. J.; Zhou, W. Y.; Li, B.; Dong, L.; Duan, Y. E.; Hou, Q. W.; Liu, X. R.; Cai, H. W.; Chen, Q. G.; Dang, Z. M. Enhanced mechanical and dielectric properties of an epoxy resin modified with hydroxyl-terminated polybutadiene. Compos. Part A-Appl. S. 2018 , 114 , 97−106..

Domun, N.; Hadavinia, H.; Zhang, T.; Sainsbury, T.; Liaghat, G. H.; Vahid, S. Improving the fracture toughness and the strength of epoxy using nanomaterials--a review of the current status. Nanoscale 2015, 7 , 10294−10329..

Pruksawan, S.; Samitsu, S.; Fujii, Y.; Torikai, N.; Naito, M. Toughening effect of rodlike cellulose nanocrystals in epoxy adhesive. ACS Appl. Polym. Mater. 2020 , 2 , 1234−1243..

Su, C.; Wang, X.; Ding, L. N.; Wu, Z. S. Enhancement of mechanical behavior of FRP composites modified by silica nanoparticles. Constr. Build. Mater. 2020 , 262 , 120769−120781..

Liu, X. F.; Luo, X.; Liu, B. W.; Zhong, H. Y.; Guo, D. M.; Yang, R.; Chen, L.; Wang, Y. Z. Toughening epoxy resin using a liquid crystalline elastomer for versatile application. ACS Appl. Polym. Mater. 2019 , 1 , 2291−2301..

Xiao, L. H.; Liu, Z. S.; Li, N.; Li, S.; Fu, P.; Wang, Y. G.; Huang, J. R.; Chen, J.; Nie, X. A. A hyperbranched polyme r from tung oil for the modification of epoxy thermoset with simultaneous improvement in toughness and strength. New J. Chem. 2020 , 44 , 16856−16863..

Xu, P. J.; Du, X. M.; Cong, P. L.; Zhou, Z. J. Properties of paving epoxy asphalt with epoxy-terminated hyperbranched polyester. Road Mater. Pavement Des. 2020 , 23 , 234−246..

Teng, N.; Dai, J. Y.; Wang, S. P.; Hu, J. Y.; Liu, X. Q. Hyperbranched flame retardant for epoxy resin modification: Simultaneously improved flame retardancy, toughness and strength as well as glass transition temperature. Chem. Eng. J. 2022 , 428 , 131226−311236..

Ahmadloo, E.; Gharehaghaji, A. A.; Latifi, M.; Mohammadi, N.; Saghafi, H. How fracture toughness of epoxy-based nanocomposite is affected by PA66 electrospun nanofiber yarn. Eng. Fract. Mech. 2017 , 182 , 62−73..

Gul, S.; Kausar, A.; Mehmood, M.; Muhammad, B.; Jabeen, S. Progress on epoxy/polyamide and inorganic nanofiller-based hybrids: introduction, application, and future potential. Polym. Plast. Technol. 2016 , 55 , 1842−1862..

Inamdar, A.; Cherukattu, J.; Anand, A.; Kandasubramanian, B. Thermoplastic-toughened high-temperature cyanate esters and their application in advanced composites. Ind. Eng. Chem. Res. 2018 , 57 , 4479−4504..

Mi, X. Q.; Liang, N.; Xu, H. F.; Wu, J.; Jiang, Y.; Nie, B.; Zhang, D. H. Toughness and its mechanisms in epoxy resins. Prog. Mater. Sci. 2022 , 130 , 100977−101020..

Ortiz, C.; Kim, R.; Rodighiero, E.; Ober, C. K.; Kramer, E. J. Deformation of a polydomain, liquid crystalline epoxy-based thermoset. Macromolecules 1998 , 31 , 4074−4088..

Chen, F.; Cong, Y. H.; Zhang, B. Y. Synthesis and characterization of liquid crystalline epoxy and co-polymerisation with a non-mesomorphic epoxy resin. Liq. Cryst. 2016 , 43 , 1100−1109..

Yeo, H. Curing kinetics of liquid crystalline 4,4′-diglycidyloxybiphenyl epoxy with various diamines. Polymer 2019 , 168 , 209−217..

Liu, Z.; Yuan, L.; Liang, G. Z.; Gu, A. J. Tough epoxy/cyanate ester resins with improved thermal stability, lower dielectric constant and loss based on unique hyperbranched polysiloxane liquid crystalline. Polym. Adv. Technol. 2015 , 26 , 1608−1618..

Hu, B.; Cong, Y. H.; Zhang, B. Y.; Zhang, L.; Shen, Y.; Huang, H. Z. Enhancement of thermal and mechanical performances of epoxy nanocomposite materials based on graphene oxide grafted by liquid crystalline monomer with Schiff base. J. Mater. Sci. 2019 , 55 , 3712−3727..

Qi, Y.; Weng, Z. H.; Kou, Y.; Song, L. Q.; Li, J. H.; Wang, J. Y.; Zhang, S. H.; Liu, C.; Jian, X. G. Synthesize and introduce bio-based aromatic s -triazine in epoxy resin: Enabling extremely high thermal stability, mechanical properties, and flame retardancy to achieve high-performance sustainable polymers. Chem. Eng. J. 2021 , 406 , 126881−126892..

Guo, H. L.; Lu, M. G.; Liang, L. Y.; Zheng, J.; Zhang, Y. F.; Li, Y. W.; Li, Z. X.; Yang, C. H. Enhancement in the thermal and dynamic mechanical properties of high performance liquid crystalline epoxy composites through uniaxial orientation of mesogenic on carbon fiber. J. Appl. Polym. Sci. 2014 , 131 , 40363−40371..

Harada, M.; Hamaura, N.; Ochi, M.; Agari, Y. Thermal conductivity of liq uid crystalline epoxy/BN filler composites having ordered network structure. Compos. Part B-Eng. 2013 , 55 , 306−313..

Yang, X. T.; Zhong, X.; Zhang, J. L.; Gu, J. W. Intrinsic high thermal conductive liquid crystal epoxy film simultaneously combining with excellent intrinsic self-healing performance. J. Mater. Sci. Technol. 2021 , 68 , 209−215..

Ligon-Auer, S. C.; Schwentenwein, M.; Gorsche, C.; Stampfl, J.; Liska, R. Toughening of photo-curable polymer networks: a review. Polym. Chem. 2016 , 7 , 257−286..

Fu, Z. L.; Sun, Y. S. Epoxy resin toughened by thermoplastics. Chinese J. Polym. Sci. 1989 , 29 , 367−378..

Wei, C.; Tan, S. T.; Wang, X. Y.; Zhang, M. Q.; Zeng, H. M. Effects of liquid crystalline polyurethane on the structure and properties of epoxy. J. Mater. Sci. Lett. 2002 , 21 , 719−722..

Yu, G. P.; Liu, C.; Zhou, H. X.; Wang, J. Y.; Lin, E. C.; Jian, X. G. Synthesis and characterization of soluble copoly(arylene ether sulfone phenyl- s -triazine)s contai ning phthalazinone moieties in the main chain. Polymer 2009 , 50 , 4520−4528..

Zivkovic, Z. D.; Dobovisek, B. Determination of reaction-kinetics based on a part of a differential thermal-analysis or thermogravimetric curve. Thermochim. Acta 1979 , 32 , 205−211..

Kissinger, H. F. Reaction kinetics in differential thermal analysis. Anal. Chem. 1957 , 29 , 1702−1706..

Miao, J. T.; Yuan, L.; Guan, Q. B.; Liang, G. Z.; Gu, A. J. Biobased heat resistant epoxy resin with extremely high biomass content from 2,5-furandicarboxylic acid and eugenol. ACS Sustainable Chem. Eng. 2017 , 5 , 7003−7011..

Qi, Y.; Weng, Z. H.; Zhang, K. W.; Wang, J. Y.; Zhang, S. H.; Liu, C.; Jian, X. G. Magnolol-based bio-epoxy resin with acceptable glass transition temperature, processability and flame retardancy. Chem. Eng. J. 2020 , 387 , 124115−124128..

Views

236

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Improvements of Hydrophobicity and Toughness of Epoxy Coatings Modified with Hydroxyl-terminated Fluororubber

In situ Loaded Nanoscale Red Phosphorus on Mesoporous Silica for Simultaneously Improved Flame Retardancy and Toughness of Epoxy Composites

Preparation and Chiral Recognition Ability of Crystalline Cellulose Phenylcarbamate

Special Topic: Chirality in Polymers

Manipulating Hierarchical Aggregation Structure via Film-forming Kinetics Enables Organic Photovoltaics over 20% Efficiency

Related Author

Yu-Tong Zhou

You-Fan Wu

Qian-Qian Yang

Hai-Bao Zhang

Ting Zhang

Hao-Yan Guo

Zhen-Jun Wang

Gang Li

Related Institution

College of Water Conservancy & Architectural Engineering, Shihezi University

Shaanxi Union Research Center of University and Enterprise for Advanced Transportation Infrastructure Materials

School of Materials Science and Engineering, Chang’an University

State Key Laboratory of Fire Science, University of Science and Technology of China

Mendeleev University of Chemical Technology of Russia, Miusskaya Square 9

⁰