Design of Tough, yet Strong, Heat-resistant PLA/PBAT Blends with Reconfigurable Shape Memory Behavior by Engineering Exchangeable Covalent Crosslinks

Xiao-Wen Zhou; Jing Huang; Xu-Hui Zhang; Ting Li; Yang Wang; Shi-Bo Wang; Bi-Hua Xia; Wei-Fu Dong

doi:10.1007/s10118-023-2997-0

Your Location：

Home >

Browse articles >

Design of Tough, yet Strong, Heat-resistant PLA/PBAT Blends with Reconfigurable Shape Memory Behavior by Engineering Exchangeable Covalent Crosslinks

RESEARCH ARTICLE | Updated：2023-11-27

- Design of Tough, yet Strong, Heat-resistant PLA/PBAT Blends with Reconfigurable Shape Memory Behavior by Engineering Exchangeable Covalent Crosslinks
- Chinese Journal of Polymer Science Vol. 41, Issue 12, Pages: 1868-1878(2023)
- Affiliations：
  
  The Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, China
- Author bio：
  
  jinghuang@jiangnan.edu.cn (J.H.)
  wfdong@jiangnan.edu.cn (W.F.D.)
- Funds：
- DOI：10.1007/s10118-023-2997-0
  CLC： M
- Received：21 March 2023，
  
  Revised：2023-4-29，
  
  Accepted：05 May 2023，
  
  Online First：15 June 2023，
  
  Published：01 December 2023
- Accepted：
Scan QR Code
Zhou, X. W.; Huang, J.; Zhang, X. H.; Li, T.; Wang, Y.; Wang, S. B.; Xia, B. H.; Dong, W. F. Design of tough, yet strong, heat-resistant PLA/PBAT blends with reconfigurable shape memory behavior by engineering exchangeable covalent crosslinks. Chinese J. Polym. Sci. 2023, 41, 1868–1878

Xiao-Wen Zhou, Jing Huang, Xu-Hui Zhang, et al. Design of Tough, yet Strong, Heat-resistant PLA/PBAT Blends with Reconfigurable Shape Memory Behavior by Engineering Exchangeable Covalent Crosslinks[J]. Chinese Journal of Polymer Science, 2023, 41(12): 1868-1878.
Zhou, X. W.; Huang, J.; Zhang, X. H.; Li, T.; Wang, Y.; Wang, S. B.; Xia, B. H.; Dong, W. F. Design of tough, yet strong, heat-resistant PLA/PBAT blends with reconfigurable shape memory behavior by engineering exchangeable covalent crosslinks. Chinese J. Polym. Sci. 2023, 41, 1868–1878 DOI： 10.1007/s10118-023-2997-0.

Xiao-Wen Zhou, Jing Huang, Xu-Hui Zhang, et al. Design of Tough, yet Strong, Heat-resistant PLA/PBAT Blends with Reconfigurable Shape Memory Behavior by Engineering Exchangeable Covalent Crosslinks[J]. Chinese Journal of Polymer Science, 2023, 41(12): 1868-1878. DOI： 10.1007/s10118-023-2997-0.

摘要

Exchangeable hydroxyl-ester crosslinks were programmed into biodegradable PLA/PBAT blends by straightforward reactive blending. The resultant vitrimeric PLA/PBAT blends show concurrently and significantly enhanced tensile strength

toughness

and heat resistance due to the greatly improved interfacial adhesion and the network structure. Moreover

the vitrimeic PLA/PBAT blends exhibit good reconfigurable shape memory behavior.

Abstract

Polylactide (PLA) has often been blended with biodegradable poly(butylene adipate-

-terephthalate) (PBAT) to improve its toughness. However

the strength and heat resistance of PLA are always sacrificed. Herein

exchangeable hydroxyl-ester crosslinks are constructed in PLA/PBAT blends by successively introducing a tertiary amine-containing polyol

bis-(2-hydroxyethyl)amino-tris (hydroxymethyl)methane (BTM) and 4

4’-diphenylmethane diisocyanate (MDI)

via

reactive blending. BTM can react with both PLA and PBAT by transesterification

generating PLA or PBAT chains with terminal or pendant hydroxyl groups

which can then react with MDI to form networks. With internal catalysis of tertiary amine moiety in BTM

transesterification between the residual hydroxyl groups and ester bonds can occur at high temperatures

endowing the PLA/PBAT network with vitrimeric properties. Owning to the transesterification and chain extension reactions with MDI between PLA and PBAT

the interfacial adhesion is greatly improved. As a result of the excellent interfacial adhesion and the network structure

the prepared PLA/PBAT blends show greatly enhanced heat resistance and toughness (more than 40 times that of PLA) while maintaining high stiffness comparable to PLA. Furthermore

the prepared PLA/PBAT blends exhibit promising reconfigurable shape memory behavior. The present work provides a new and facile way to achieve high-performance and functional biodegradable polymeric materials.

关键词

Keywords

references

Chemistrycanhelpmakeplasticssustainable-butitisn'tthewholesolution. Nature 2021 , 590 ,363−364..

Silva,A.L.P.;Prata,J.C.;Walker,T.R.;Duarte,A.C.;Ouyang,W.;Barcelo,D.;Rocha-Santos,T.IncreasedplasticpollutionduetoCovid-19pandemic:challengesandrecommendations. Chem. Eng. J. 2021 , 405 ,126683..

Flury,M.;Narayan,R.Biodegradableplasticasanintegralpartofthesolutiontoplasticwastepollutionoftheenvironment. Curr. Opin. Green Sustain. Chem. 2021 , 30 ,2452−2236..

Ghosh,K.;Jones,B.H.Roadmaptobiodegradableplastics—currentstateandresearchneeds. ACS Sustainable Chem. Eng. 2021 , 9 ,6170−6187..

Altman,R.Themythofhistoricalbio-basedplasticsearlybio-basedplastics,whichwereneithercleannorgreen,offerlessonsfortoday. Science 2021 , 373 ,47−49..

Farah,S.;Anderson,D.G.;Langer,R.PhysicalandmechanicalpropertiesofPLA,andtheirfunctionsinwidespreadapplications—acomprehensivereview. Adv. Drug Deliv. Rev. 2016 , 107 ,367−392..

Tripathi,N.;Misra,M.;Mohanty,A.K.Durablepolylacticacid(PLA)-basedsustainableengineeredblendsandbiocomposites:recentdevelopments,challenges,andopportunities. ACS Eng. Au 2021 , 1 ,7−38..

Yeo,J.C.C.;Muiruri,J.K.;Koh,J.J.;Thitsartarn,W.;Zhang,X.K.;Kong,J.H.;Lin,T.T.;Li,Z.B.;He,C.B.Bend,twist,andturn:firstbendableandmalleabletoughenedPLAgreencomposites. Adv. Funct. Mater. 2020 , 30 ,2001565..

Qu,Y.D.;Chen,Y.H.;Ling,X.Y.;Wu,J.L.;Hong,J.T.;Wang,H.T.;Li,Y.J.Reactivemicro-crosslinkedelastomerforsupertoughenedpolylactide. Macromolecules 2022 , 55 ,7711−7723..

Dong,X.Y.;Wu,Z.G.;Wang,Y.;Li,T.;Yuan,H.;Zhang,X.H.;Ma,P.M.;Chen,M.Q.;Dong,W.F.Designofdegradablecore-shellstarchnanoparticlesbyradicalring-openingpolymerizationof2-methylene-1,3-dioxepaneandtheirtougheningofpoly(lacticacid). Compos. Commun. 2021 , 27 ,100808..

Hamad,K.;Kaseem,M.;Ayyoob,M.;Joo,J.;Deri,F.Polylacticacidblends:thefutureofgreen,lightandtough. Prog. Polym. Sci. 2018 , 85 ,83−127..

Yang,H.R.;Jia,G.;Wu,H.;Ye,C.C.;Yuan,K.;Liu,S.L.;Zhou,L.M.;Xu,H.;Gao,L.J.;Cui,J.;Fang,S.M.Designoffullybiodegradablesuper-toughenedPLA/PBATblendswithasymmetriccomposition via reactivecompatibilizationandcontrollingmorphology. Mater. Lett. 2022 , 329 ,133067..

Chen,J.L.;Rong,C.Y.;Lin,T.T.;Chen,Y.H.;Wu,J.L.;You,J.C.;Wang,H.T.;Li,Y.J.Stableco-continuousPLA/PBATblendscompatibilizedbyinterfacialstereocomplexcrystallites:towardfullbiodegradablepolymerblendswithsimultaneouslyenhancedmechanicalpropertiesandcrystallizationrates. Macromolecules 2021 , 54 ,2852−2861..

Mohammadi,M.;Bruel,C.;Heuzey,M.C.;Carreau,P.J.CNCdispersioninPLAandPBATusingtwosolvents:morphologicalandrheologicalproperties. Cellulose 2020 , 27 ,9877−9892..

Dong,X.Y.;Liu,L.;Wang,Y.;Li,T.;Wu,Z.G.;Yuan,H.;Ma,P.M.;Shi,D.J.;Chen,M.Q.;Dong,W.F.Thecompatibilizationofpoly(propylenecarbonate)/poly(lacticacid)blendsinpresenceofcore-shellstarchnanoparticles. Carbohydr. Polym. 2021 , 254 ,8..

Cvek,M.;Paul,U.C.;Zia,J.;Mancini,G.;Sedlarik,V.;Athanassiou,A.BiodegradablefilmsofPLA/PPCandcurcuminaspackagingmaterialsandsmartindicatorsoffoodspoilage. ACS Appl. Mater. Interfaces 2022 , 14 ,14654−14667..

Mulchandani,N.;Masutani,K.;Kumar,S.;Yamane,H.;Sakurai,S.;Kimura,Y.;Katiyar,V.ToughenedPLA- b -PCL- b -PLAtriblockcopolymerbasedbiomaterials:effectofself-assemblednanostructureandstereocomplexationonthemechanicalproperties. Polym. Chem. 2021 , 12 ,3806−3824..

Zhang,C.M.;Zhai,T.L.;Turng,L.S.;Dan,Y.Morphological,mechanical,andcrystallizationbehaviorofpolylactide/polycaprolactoneblendscompatibilizedbyL-lactide/caprolactonecopolymer. Ind. Eng. Chem. Res. 2015 , 54 ,9505−9511..

VidhyaNagarajan,K.Z.,ManjusriMisra,AmarK.Mohanty.OvercomingthefundamentalchallengesinimprovingtheimpactstrengthandcrystallinityofPLAbiocomposites:influenceofnucleatingagentandmoldtemperature. ACS Appl. Mater. Interfaces 2015 , 7 ,11203−11214..

Si,W.J.;Zhang,H.;Li,Y.D.;Huang,C.L.;Weng,Y.X.;Zeng,J.B.Highlytoughenedandheatresistantpoly(L-lactide)/poly( ε -caprolactone)blends via engineeringbalancebetweenkineticsandthermodynamicsofphasicmorphologywithstereocomplexcrystallite. Compos. B Eng. 2020 , 197 ,1359−8368..

Zhao,X.P.;Liu,J.C.;Li,J.C.;Liang,X.Y.;Zhou,W.Y.;Peng,S.X.Strategiesandtechniquesforimprovingheatresistanceandmechanicalperformancesofpoly(lacticacid)(PLA)biodegradablematerials. Int. J. Biol. Macromol. 2022 , 218 ,115−134..

Bednarek,M.;Borska,K.;Kubisa,P.Newpolylactide-basedmaterialsbychemicalcrosslinkingofPLA. Polym. Rev. 2021 , 61 ,493−519..

Tillet,G.;Boutevin,B.;Ameduri,B.Chemicalreactionsofpolymercrosslinkingandpost-crosslinkingatroomandmediumtemperature. Prog. Polym. Sci. 2011 , 36 ,191−217..

Nagasawa,N.;Kasai,N.;Yagi,T.;Yoshii,F.;Tamada,M.Radiation-inducedcrosslinkingandpost-processingofpoly(L-lacticacid)composite. Radiat. Phys. Chem. 2011 , 80 ,145−148..

Montarnal,D.;Capelot,M.;Tournilhac,F.;Leibler,L.Silica-likemalleablematerialsfrompermanentorganicnetworks. Science 2011 , 334 ,965−968..

VanZee,N.J.;Nicolay,R.Vitrimers:permanentlycrosslinkedpolymerswithdynamicnetworktopology. Prog. Polym. Sci. 2020 , 104 ,67−79..

Rottger,M.;Domenech,T.;vanderWeegen,R.;Nicolay,A.B.R.;Leibler,L.High-performancevitrimersfromcommoditythermoplasticsthroughdioxaborolanemetathesis. Science 2017 , 356 ,62−65..

Lessard,J.J.;Garcia,L.F.;Easterling,C.P.;Sims,M.B.;Bentz,K.C.;Arencibia,S.;Savin,D.A.;Sumerlin,B.S.Catalyst-freevitrimersfromvinylpolymers. Macromolecules 2019 , 52 ,2105−2111..

Wang,S.;Ma,S.Q.;Qiu,J.F.;Tian,A.P.;Li,Q.;Xu,X.W.;Wang,B.B.;Lu,N.;Liu,Y.L.;Zhu,J.Upcyclingofpost-consumerpolyolefinplasticstocovalentadaptablenetworks via in situ continuousextrusioncross-linking. Green Chem. 2021 , 23 ,2931−2937..

Saed,M.O.;Lin,X.Y.;Terentjev,E.M.Dynamicsemicrystallinenetworksofpolypropylenewiththiol-anhydrideexchangeablecrosslinks. ACS Appl. Mater. Interfaces 2021 , 13 ,42055−42062..

Demongeot,A.;Groote,R.;Goossens,H.;Hoeks,T.;Tournilhac,F.;Leibler,L.Cross-linkingofpoly(butyleneterephthalate)byreactiveextrusionusingZn(II)epoxy-vitrimerchemistry. Macromolecules 2017 , 50 ,6117−6127..

Qiu,J.F.;Ma,S.Q.;Wang,S.;Tang,Z.B.;Li,Q.;Tian,A.P.;Xu,X.W.;Wang,B.B.;Lu,N.;Zhu,J.Upcyclingofpolyethyleneterephthalatetocontinuouslyreprocessablevitrimersthroughreactiveextrusion. Macromolecules 2021 , 54 ,703−712..

Brutman,J.P.;Delgado,P.A.;Hillmyer,M.A.Polylactidevitrimers. ACS Macro Lett. 2014 , 3 ,607−610..

Borska,K.;Bednarek,M.;Pawlak,A.Reprocessablepolylactide-basednetworkscontainingurethaneanddisulfidelinkages. Eur. Polym. J. 2021 , 156 ,0014−3057..

Liu,Y.B.;Peng,L.M.;Bao,R.Y.;Yang,M.B.;Yang,W.Vitrimericpolylactidebytwo-stepalcoholysisandtransesterificationduringreactiveprocessingforenhancedmeltstrength. ACS Appl. Mater. Interfaces 2022 , 14 ,45966−45977..

Chen,X.;Zeng,Z.;Ju,Y.;Zhou,M.;Bai,H.;Fu,Q.DesignofbiodegradablePLA/PBATblendswithbalancedtoughnessandstrength via interfacialcompatibilizationanddynamicvulcanization. Polymer 2023 , 266 ,125620..

Ai,X.;Li,X.;Yu,Y.L.;Pan,H.W.;Yang,J.;Wang,D.M.;Yang,H.L.;Zhang,H.L.;Dong,L.S.Themechanical,thermal,rheologicalandmorphologicalpropertiesofPLA/PBATblownfilmsbyusingbis(tert-butyldioxyisopropyl)benzeneascrosslinkingagent. Polym. Eng. Sci. 2019 , 59 ,E227−E236..

Carbonell-Verdu,A.;Ferri,J.M.;Dominici,F.;Boronat,T.;Sanchez-Nacher,L.;Balart,R.;Torre,L.ManufacturingandcompatibilizationofPLA/PBATbinaryblendsbycottonseedoil-basedderivatives. Express Polym. Lett. 2018 , 12 ,808−823..

daSilva,J.M.F.;Soares,B.G.Epoxidizedcardanol-basedprepolymeraspromisingbiobasedcompatibilizingagentforPLA/PBATblends. Polym. Test. 2021 , 93 ,7..

Qi,J.;Pan,Y.T.;Luo,Z.L.;Wang,B.B.FacileandscalablefabricationofbioderivedflameretardantbasedonadenineforenhancingfiresafetyoffullybiodegradablePLA/PBAT/TPSternaryblends. J. Appl. Polym. Sci. 2021 , 138 ,17..

Han,Y.;Shi,J.W.;Mao,L.X.;Wang,Z.;Zhang,L.Q.ImprovementofcompatibilityandmechanicalperformancesofPLA/PBATcompositeswithepoxidizedsoybeanoilascompatibilizer. Ind. Eng. Chem. Res. 2020 , 59 ,21779−21790..

Ludwiczak,J.;Frackowiak,S.;Leluk,K.Studyofthermal,mechanicalandbarrierpropertiesofbiodegradablePLA/PBATfilmswithhighlyorientedMMT. Materials 2021 , 14 ,12..

Aldas,M.;Ferri,J.M.;Motoc,D.L.;Peponi,L.;Arrieta,M.P.;Lopez-Martinez,J.Gumrosinasasizecontrolagentofpoly(butyleneadipate- co -terephthalate)(PBAT)domainstoincreasethetoughnessofpackagingformulationsbasedonpolylacticacid(PLA). Polymers 2021 , 13 ,19..

Aliotta,L.;Canesi,I.;Lazzeri,A.Studyonthepreferentialdistributionofacetyltributylcitrateinpoly(lactic)acid-poly(butyleneadipate- co -terephthalate)blends. Polym. Test. 2021 , 98 ,14..

Sarul,D.S.;Arslan,D.;Vatansever,E.;Kahraman,Y.;Durmus,A.;Salehiyan,R.;Nofar,M.PreparationandcharacterizationofPLA/PBAT/CNCblendnanocomposites. Colloid. Polym. Sci. 2021 , 299 ,987−998..

He,H.Z.;Liu,B.D.;Xue,B.;Zhang,H.StudyonstructureandpropertiesofbiodegradablePLA/PBAT/organic-modifiedMMTnanocomposites. J. Thermoplast. Compos. Mater. 2022 , 35 ,503−520..

Nofar,M.;Salehiyan,R.;Ciftci,U.;Jalali,A.;Durmus,A.DuctilityimprovementsofPLA-basedbinaryandternaryblendswithcontrolledmorphologyusingPBAT,PBSA,andnanoclay. Compos. B Eng. 2020 , 182 ,13..

Wang,X.;Peng,S.X.;Chen,H.;Yu,X.L.;Zhao,X.P.Mechanicalproperties,rheologicalbehaviors,andphasemorphologiesofhigh-toughnessPLA/PBATblendsby in-situ reactivecompatibilization. Compos. B. Eng. 2019 , 173 ,10..

Thiyagu,T.T.;Kumar,J.;Gurusamy,P.;Sathiyamoorthy,V.;Maridurai,T.;Prakash,V.R.A.Effectofcashewshellbiomasssynthesizedcardanoloilgreencompatibilizeronflexibility,barrier,thermal,andwettabilityofPLA/PBATbiocompositefilms. Biomass Convers. Biorefin. 2021 , 23 ,11..

Zheng,N.;Fang,Z.Z.;Zou,W.K.;Zhao,Q.;Xie,T.Thermosetshape-memorypolyurethanewithintrinsicplasticityenabledbytranscarbamoylation. Angew. Chem. Int. Ed. 2016 , 55 ,11421−11425..

Cao,L.M.;Liu,C.;Zou,D.J.;Zhang,S.D.;Chen,Y.K.UsingcellulosenanocrystalsassustainableadditivetoenhancemechanicalandshapememorypropertiesofPLA/ENRthermoplasticvulcanizates. Carbohydr. Polym. 2020 , 230 ,8..

He,S.Y.;Hu,S.K.;Wu,Y.W.;Jin,R.H.;Niu,Z.H.;Wang,R.G.;Xue,J.J.;Wu,S.Z.;Zhao,X.Y.;Zhang,L.Q.Polyurethanesbasedonpolylacticacidfor3Dprintingandshape-memoryapplications. Biomacromolecules 2022 , 34 ,11..

Views

554

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Fully Biodegradable Poly(lactic acid)/Poly(propylene carbonate) Shape Memory Materials with Low Recovery Temperature Based on in situ Compatibilization by Dicumyl Peroxide

Mechanical Bonds Unlock Rapid Stress Relaxation in Covalent Adaptable Networks via Topology-preserving Chain Sliding

Water Swelling-induced Stiffness Enhancement of Polymer Hydrogels

Porous Organic Polymers for Photocatalytic Hydrogen Peroxide Production: Recent Advances and Future Perspectives

End-to-End Neuron-inspired Signal Transduction Using Organic Electrochemical Transistors

Related Author

Sheng-Xue Qin

Cui-Xiang Yu

Xue-Yang Chen

Hai-Ping Zhou

Li-Fen Zhao

Jun Zhao

Lin Cheng

Zhao-Ming Zhang

Related Institution

College of Mechanical and Electric Engineering, College of Materials Science and Engineering, Shandong University of Science and Technology

Qingdao Reinforced Thermoplastic Pipes Engineering Technology Center

Renji Branch of National Center for Translational Medicine, Shanghai Key Laboratory for Nucleic Acid Chemistry and Nanomedicine, Renji Hospital, and School of Medicine, Shanghai Jiao Tong University

State Key Laboratory of Synergistic Chem-Bio Synthesis, Frontiers Science Center for Transformative Molecules, School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University

State Key Laboratory of Advanced Marine Materials, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences

⁰