Effects of Interface on the Dynamic Hysteresis Loss and Static Mechanical Properties of Illite Filled SBR Composites

Zhe-Peng Wang; Hao Zhang; Qiang Liu; Shao-Juan Wang; Shou-Ke Yan

doi:10.1007/s10118-022-2791-4

Your Location：

Home >

Browse articles >

Effects of Interface on the Dynamic Hysteresis Loss and Static Mechanical Properties of Illite Filled SBR Composites

RESEARCH ARTICLE | Updated：2022-10-25

- Effects of Interface on the Dynamic Hysteresis Loss and Static Mechanical Properties of Illite Filled SBR Composites
- Chinese Journal of Polymer Science Vol. 40, Issue 11, Pages: 1493-1502(2022)
- Affiliations：
  
  a.Key Laboratory of Rubber-Plastics, Ministry of Education, Qingdao University of Science & Technology, Qingdao 266042, China
  b.State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China
- Author bio：
  
  zhanghao@qust.edu.cn (H.Z.)
  skyan@buct.edu.cn skyan@qust.edu.cn (S.K.Y.)
- Funds：
- DOI：10.1007/s10118-022-2791-4
  CLC：
- Received：08 March 2022，
  
  Revised：2022-4-22，
  
  Accepted：12 May 2022，
  
  Online First：17 August 2022，
  
  Published：01 November 2022
- Accepted：
Scan QR Code
Wang, Z. P.; Zhang, H.; Liu, Q.; Wang, S. J.; Yan, S. K. Effects of interface on the dynamic hysteresis loss and static mechanical properties of illite filled SBR composites. Chinese J. Polym. Sci. 2022, 40, 1493–1502

Zhe-Peng Wang, Hao Zhang, Qiang Liu, et al. Effects of Interface on the Dynamic Hysteresis Loss and Static Mechanical Properties of Illite Filled SBR Composites[J]. Chinese Journal of Polymer Science, 2022, 40(11): 1493-1502.
Wang, Z. P.; Zhang, H.; Liu, Q.; Wang, S. J.; Yan, S. K. Effects of interface on the dynamic hysteresis loss and static mechanical properties of illite filled SBR composites. Chinese J. Polym. Sci. 2022, 40, 1493–1502 DOI： 10.1007/s10118-022-2791-4.

Zhe-Peng Wang, Hao Zhang, Qiang Liu, et al. Effects of Interface on the Dynamic Hysteresis Loss and Static Mechanical Properties of Illite Filled SBR Composites[J]. Chinese Journal of Polymer Science, 2022, 40(11): 1493-1502. DOI： 10.1007/s10118-022-2791-4.

摘要

Development of alternative reinforcement fillers for carbon black has attracted widespread attention. Her

the reinforcement of illite modified by organic silane on styrene butadiene rubber (SBR) was explored. The increment of tensile strength and modulus at 300% strain of more than 7 times demonstrates its potential application as reinforcing filler for SBR.

Abstract

Despite growing interest in nano-sized fillers

micro-sized fillers with desired compatibility are still used for reinforcing rubbers

owing to their lower production cost and easier processing relative to nano-sized fillers. Especially

the abundant and eco-friendly clay minerals are recognized as the materials of the twenty-first century. Herein

illite

a naturally occurring clay having dimension in micrometric scale

has been selected as filler to reinforce the SBR. To improve the compatibility of illite with SBR

the illite was modified by either bis[3-(triethoxysilyl)propyl] tetrasulfide (Si69-illite) or 3-mercaptopropyltriethoxysilane (KH580-illite). The interfacial interactions of SBR composites filled with pristine illite (illite/SBR) and Si69-illite (Si69-illite/SBR)

or KH580-illite (KH580-illite/SBR) were characterized by bound rubber content and Payne effect measurements

while dynamic hysteresis losses of these uncured and cured composites were also analyzed under various strain amplitudes. It was found that the filler-rubber interactions were greatly improved for Si69-illite/SBR and KH580-illite/SBR systems compared to the illite/SBR composite. This leads to an increment of modulus at 300% strain of the composites from 3.46 MPa for illite/SBR to 7.70 MPa for Si69-illite/SBR and 12.96 MPa for KH580-illite/SBR. Moreover

lower rolling resistance and better wear resistance without compromising wet traction of Si69-illite/SBR and KH580-illite/SBR have been achieved. This demonstrates the high possibility of Si69 and KH580 modified illites as promising alternative fillers for reinforcing rubbers.

关键词

Keywords

references

Byers, J.T., in Basic elastomer technology , American Chemical Society, Ohio, 2001 , p. 82–111.

Xu, P.; Zhao, X.; Niu, D.; Hoch, M.; Ma, P.; Dong, W.; Chen, M.; Deshmukh, Y . Superior reinforcement of ethyl- co -vinyl acetate rubber composites by using nano-sized starch filler: the role of particle size and reactive compatibilization . Eur. Polym. J. , 2018 . 105 107 - 114 . DOI: 10.1016/j.eurpolymj.2018.05.019 http://doi.org/10.1016/j.eurpolymj.2018.05.019 .

Zhang, Y.; Zhang, A.; Kang, L.; Zhang, Y . Mechanical properties and thermal stability of kaolinite/emulsion polymerization styrene butadiene rubber composite prepared by latex blending method . Polym. Sci., Ser. A , 2020 . 62 407 - 421 . DOI: 10.1134/S0965545X20040112 http://doi.org/10.1134/S0965545X20040112 .

Barrera, C. S.; Cornish, K . Processing and mechanical properties of natural rubber/waste-derived nano filler composites compared to macro and micro filler composites . Ind. Crops Prod. , 2017 . 107 217 - 231 . DOI: 10.1016/j.indcrop.2017.05.045 http://doi.org/10.1016/j.indcrop.2017.05.045 .

Dannenberg, E. M . Filler choices in the rubber industry . Rubber Chem. Technol. , 1982 . 55 860 - 880 . DOI: 10.5254/1.3535905 http://doi.org/10.5254/1.3535905 .

Kausar, A., in Hybrid polymer composite materials , Woodhead Publishing, Duxford, 2017 , p. 115−132.

Khalifa, A. Z.; Cizer, Ö.; Pontikes, Y.; Heath, A.; Patureau, P.; Bernal, S. A.; Marsh, A. T.M . Advances in alkali-activation of clay minerals . Cem. Concr. Res. , 2020 . 132 106050 DOI: 10.1016/j.cemconres.2020.106050 http://doi.org/10.1016/j.cemconres.2020.106050 .

Credico, B . D.; Cobani, E.; Callone, E.; Conzatti, L.; Cristofori, D.; D’Arienzo, M.; Dirè S.; Giannini, L.; Hanel, T.; Scotti, R.; Stagnaro, P.; Tadiello, L.; Morazzoni, F. Size-controlled self-assembly of anisotropic sepiolite fibers in rubber nanocomposites . Appl. Clay Sci. , 2018 . 152 51 - 64 . DOI: 10.1016/j.clay.2017.10.032 http://doi.org/10.1016/j.clay.2017.10.032 .

Gualtieri, A . F.; Ferrari, S.; Leoni, M.; Grathoff, G.; Hugo, R.; Shatnawi, M.; Paglia, G.; Billinge, S. Structural characterization of the clay mineral illite-1M . J. Appl. Cryst. , 2008 . 41 402 - 415 . DOI: 10.1107/S0021889808004202 http://doi.org/10.1107/S0021889808004202 .

Tamura, K.; Yokoyama, S.; Pascua, C. S.; Yamada, H . New age of polymer nanocomposites containing dispersed high-aspect-ratio silicate nanolayers . Chem. Mater. , 2008 . 20 2242 - 2246 . DOI: 10.1021/cm702860m http://doi.org/10.1021/cm702860m .

Pavlidou, S.; Papaspyrides, C. D . A review on polymer−layered silicate nanocomposites . Prog. Polym. Sci. , 2008 . 33 1119 - 1198 . DOI: 10.1016/j.progpolymsci.2008.07.008 http://doi.org/10.1016/j.progpolymsci.2008.07.008 .

Reddy, K. R.; Reddy, C. V.; Babu, B.; Ravindranadh, K.; Naveen, S.; Raghu, A. V., in Modified clay and zeolite nanocomposite materials , Elsevier, Amsterdam, 2019 , p. 197–218.

Wang, Z.; Wang, S.; Yu, X.; Zhang, H.; Yan, S . Study on the Use of CTAB-treated illite as an alternative filler for natural rubber . ACS Omega , 2021 . 6 19017 - 19025 . DOI: 10.1021/acsomega.1c02304 http://doi.org/10.1021/acsomega.1c02304 .

Edwards, D. C . Polymer-filler interactions in rubber reinforcement . J. Mater. Sci. , 1990 . 25 4175 - 4185 . DOI: 10.1007/BF00581070 http://doi.org/10.1007/BF00581070 .

Fan, Y.; Fowler, G. D.; Norris, C . Potential of a pyrolytic coconut shell as a sustainable biofiller for styrene-butadiene rubber . Ind. Eng. Chem. Res. , 2017 . 56 4779 - 4791 . DOI: 10.1021/acs.iecr.7b00405 http://doi.org/10.1021/acs.iecr.7b00405 .

Du, M.; Guo, B.; Lei, Y.; Liu, M.; Jia, D . Carboxylated butadiene-styrene rubber/halloysite nanotube nanocomposites: interfacial interaction and performance . Polymer , 2008 . 49 4871 - 4876 . DOI: 10.1016/j.polymer.2008.08.042 http://doi.org/10.1016/j.polymer.2008.08.042 .

Wei, K. K.; Leng, T. P.; Keat, Y. C.; Osman, H.; Ying, L. B . Enhancing compatibility in epoxy/vulcanized natural rubber (VNR)/Graphene nano-platelets (GNP) system using epoxidized natural rubber (ENR-50) . Compos. Part B-Eng. , 2019 . 174 107058 DOI: 10.1016/j.compositesb.2019.107058 http://doi.org/10.1016/j.compositesb.2019.107058 .

Pan, Y.; Zhang, M.; Zhang, J.; Zhu, X.; Bian, H.; Wang, C . Effect of silane coupling agent on modification of areca fiber/natural latex . Materials , 2020 . 13 4896 DOI: 10.3390/ma13214896 http://doi.org/10.3390/ma13214896 .

Radabutra, S.; Khemthong, P.; Saengsuwan, S . Effect of silane coupling agent pretreatment on the properties of rice straw particleboard bonded with prevulcanized natural rubber latex . J. Rubber Res. , 2021 . 24 157 - 163 . DOI: 10.1007/s42464-021-00081-z http://doi.org/10.1007/s42464-021-00081-z .

Funes, I. G.A.; Peralta M. E.; Pettinari, G. R.; Carlos, L.; Parolo, M. E . Facile modification of montmorillonite by intercalation and grafting: the study of the binding mechanisms of a quaternary alkylammonium surfactant . Appl. Clay Sci. , 2020 . 195 105738 DOI: 10.1016/j.clay.2020.105738 http://doi.org/10.1016/j.clay.2020.105738 .

Chu, L.; Kan, M.; Jerrams, S.; Zhang, R.; Xu, Z.; Liu, L.; Wen, S.; Zhang, L . Constructing chemical interface layers by using ionic liquid in graphene oxide/rubber composites to achieve high-wear resistance in environmental-friendly green tires . ACS Appl. Mater. Interfaces , 2022 . 14 5995 - 6004 . DOI: 10.1021/acsami.1c21605 http://doi.org/10.1021/acsami.1c21605 .

Payne, A. R . The Dynamic properties of carbon black loaded natural rubber vulcanizates. Part II . Rubber Chem. Technol. , 1962 . VI 368 - 372 . .

Sun, J.; Song, Y.; Zheng, Q.; Tan, H.; Yu, J.; Li, H . Nonlinear rheological behavior of silica filled solution-polymerized styrene butadiene rubber . J. Polym. Sci., Part B: Polym. Phys. , 2007 . 45 2594 - 2602 . DOI: 10.1002/polb.21263 http://doi.org/10.1002/polb.21263 .

Cantournet, S.; Desmorat, R.; Besson, J . Mullins effect and cyclic stress softening of filled elastomers by internal sliding and friction thermodynamics model . Int. J. Solids Struct. , 2009 . 46 2255 - 2264 . DOI: 10.1016/j.ijsolstr.2008.12.025 http://doi.org/10.1016/j.ijsolstr.2008.12.025 .

Mai, T. T.; Morishita, Y.; Urayama, K . Induced anisotropy by Mullins effect in filled elastomers subjected to stretching with various geometries . Polymer , 2017 . 126 29 - 39 . DOI: 10.1016/j.polymer.2017.08.012 http://doi.org/10.1016/j.polymer.2017.08.012 .

Li, Z.; Xu, H.; Xia, X.; Song, Y.; Zheng, Q . Energy dissipation accompanying Mullins effect of nitrile butadiene rubber/carbon black nanocomposites . Polymer , 2019 . 171 106 - 114 . DOI: 10.1016/j.polymer.2019.03.043 http://doi.org/10.1016/j.polymer.2019.03.043 .

Song, Y.; Yang, R.; Du, M.; Shi, X.; Zheng, Q . Rigid nanoparticles promote the softening of rubber phase in filled vulcanizates . Polymer , 2019 . 177 131 - 138 . DOI: 10.1016/j.polymer.2019.06.003 http://doi.org/10.1016/j.polymer.2019.06.003 .

Reuvekamp, L.A.E.M.; Brinke, J.W. T.; Swaaij, P.J. V.; Noordermeer, J.W.M . Effects of time and temperature on the reaction of TESPT silane coupling agent during mixing with silica filler and tire rubber . Rubber Chem. Technol. , 2002 . 75 187 - 198 . DOI: 10.5254/1.3544972 http://doi.org/10.5254/1.3544972 .

Lei, Y.; Tang, Z.; Zhu, L; Guo, B.; Jia, D . Thiol-containing ionic liquid for the modification of styrene–butadiene rubber/silica composites . J. Appl. Polym. Sci. , 2012 . 123 1252 - 1260 . DOI: 10.1002/app.34026 http://doi.org/10.1002/app.34026 .

Lipińska, M.; Imiela, M . Morphology, rheology and curing of (ethylene-propylene elastomer/hydrogenate acrylonitrile-butadiene rubber) blends reinforced by POSS and organoclay . Polym. Test. , 2019 . 75 26 - 37 . DOI: 10.1016/j.polymertesting.2019.01.020 http://doi.org/10.1016/j.polymertesting.2019.01.020 .

Lorenz, O.; Parks, C. R . The crosslinking efficiency of some vulcanizing agents in natural rubber . J. Polym. Sci. , 1961 . 50 299 - 312 . DOI: 10.1002/pol.1961.1205015404 http://doi.org/10.1002/pol.1961.1205015404 .

Komadel, P.; Schmidt, D.; Madejová, J.; Číčel, B . Alteration of smectites by treatments with hydrochloric acid and sodium carbonate solutions . Appl. Clay Sci. , 1990 . 5 113 - 122 . DOI: 10.1016/0169-1317(90)90017-J http://doi.org/10.1016/0169-1317(90)90017-J .

Konan, K. L.; Peyratout, C.; Smith, A.; Bonnet, J.-P.; Magnoux, P.; Ayrault, P. Surface modifications of illite in concentrated lime solutions investigated by pyridine adsorption. J. Colloid Interface Sci. 2012 , 382 , 17−21.

Othmani-Assmann, H.; Benna-Zayani, M.; Geiger, S.; Geiger, S.; Fraisse, B.; Kbir-Ariguib, N.; Trabelsi-Ayadi, M.; Ghermani, N. E.; Grossiord, J. L . Physico-chemical characterizations of tunisian organophilic bentonites . J. Phys. Chem. C , 2007 . 111 10869 - 10877 . DOI: 10.1021/jp068814a http://doi.org/10.1021/jp068814a .

Leblanc, J. L . Rubber–filler interactions and rheological properties in filled compounds . Prog. Polym. Sci. , 2002 . 27 627 - 687 . DOI: 10.1016/S0079-6700(01)00040-5 http://doi.org/10.1016/S0079-6700(01)00040-5 .

Léopoldès, J.; Barrès, C.; Leblanc, J. L.; Georget, P . Influence of filler-rubber interactions on the viscoelastic properties of carbon-black-filled rubber compounds . J. Appl. Polym. Sci. , 2004 . 91 577 - 588 . DOI: 10.1002/app.13155 http://doi.org/10.1002/app.13155 .

Kriaa, A.; Hamdi, N.; Srasra, E . Proton adsorption and acid base properties of Tunisian illites in aqueous solution . J. Struct. Chem. , 2009 . 50 273 - 287 . DOI: 10.1007/s10947-009-0039-6 http://doi.org/10.1007/s10947-009-0039-6 .

Qian, M.; Zou, B.; Chen, Z.; Huang, W.; Wang, X.; Tang, B.; Liu, Q.; Zhu, Y . The influence of filler size and crosslinking degree of polymers on Mullins effect in filled NR/BR composites . Polymers , 2021 . 13 2284 DOI: 10.3390/polym13142284 http://doi.org/10.3390/polym13142284 .

Cichomski, E.; Tolpekina, T. V.; Schultz, S.; Noordermeer, J. W.M.; Dierkes, W. K.; Blume, A. Influence of silica-polymer bond microstructure on tire-performance indicators. in 11 th Rubber Fall Colloquium , Hannover, Germany, 2014 , p. 1–16.

Byers, J. T . Fillers for balancing passenger tire tread properties . Rubber Chem. Technol. , 2002 . 75 527 - 547 . DOI: 10.5254/1.3547681 http://doi.org/10.5254/1.3547681 .

Views

149

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Janus Particle Sizing Agent for Interfacial Enhancement of Basalt Fiber/Poly(vinyl chloride) Composites

Regulation of Mechanical Properties of Conductive Polymer Composites

Enhanced Crystallization Rate of Poly(L-lactide)/Hydroxyapatite-graft-poly(D-lactide) Composite with Different Processing Temperatures

Polyester-supported Chitosan-Poly(vinylidene fluoride)-Inorganic-Oxide-Nanoparticles Composites with Improved Flame Retardancy and Thermal Stability

Special Topic: Chirality in Polymers

Related Author

Fu-Xin Liang

Tian-Lin Liu

Peng Kang

Da-Li Gao

Na Wang

Sheng-Peng Shi

Qi Xin

Tao Cai

Related Institution

College of Materials Science and Engineering, Shenyang University of Chemical Technology

Department of Chemical Engineering, Tsinghua University

SINOPEC (Beijing) Research Institute of Chemical Industry Co., Ltd.

Key Lab of Artificial Micro- and Nano-Structures of Ministry of Education of China, School of Physics and Technology, Wuhan University

School of Materials and Energy, Jiangxi Science & Technology Normal University

⁰