Phthalonitrile Resins Derived from Vanillin: Synthesis, Curing Behavior, and Thermal Properties

Yue Han; Dong-Hao Tang; Guang-Xing Wang; Ya-Nan Sun; Ying Guo; Heng Zhou; Wen-Feng Qiu; Tong Zhao

doi:10.1007/s10118-019-2311-3

Your Location：

Home >

Browse articles >

Phthalonitrile Resins Derived from Vanillin: Synthesis, Curing Behavior, and Thermal Properties

ARTICLE | Updated：2019-09-03

- Phthalonitrile Resins Derived from Vanillin: Synthesis, Curing Behavior, and Thermal Properties
- Chinese Journal of Polymer Science Vol. 38, Issue 1, Pages: 72-83(2020)
- Affiliations：
  
  a.South China Advanced Institute for Soft Matter Science and Technology, South China University of Technology, Guangzhou 510640, China
  b.Laboratory of Advanced Polymeric Materials, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China
  c.University of Chinese Academy of Sciences, Beijing 100049, China
  d.Sinosteel Anshan Research Institute of Thermo-Energy Co., LTD, Anshan 114044, China
- Author bio：
  
  zhouheng@iccas.ac.cn (H.Z.)
  wfqiu@scut.edu.cn (W.F.Q.)
- Funds：
- DOI：10.1007/s10118-019-2311-3
  CLC：
- Received：20 March 2019，
  
  Revised：2019-6-2，
  
  Accepted：03 June 2019，
  
  Online First：03 September 2019，
  
  Published：2020-01
- Accepted：
Scan QR Code
Citation: Han, Y.; Tang, D. H.; Wang, G. X.; Sun, Y. N.; Guo, Y.; Zhou, H.; Qiu, W. F.; Zhao, T. Phthalonitrile resins derived from vanillin: synthesis, curing behavior, and thermal properties. Chinese J. Polym. Sci. 2020, 38, 72–83

Yue Han, Dong-Hao Tang, Guang-Xing Wang, et al. Phthalonitrile Resins Derived from Vanillin: Synthesis, Curing Behavior, and Thermal Properties[J]. Chinese Journal of Polymer Science, 2020, 38(1): 72-83.
Citation: Han, Y.; Tang, D. H.; Wang, G. X.; Sun, Y. N.; Guo, Y.; Zhou, H.; Qiu, W. F.; Zhao, T. Phthalonitrile resins derived from vanillin: synthesis, curing behavior, and thermal properties. Chinese J. Polym. Sci. 2020, 38, 72–83 DOI： 10.1007/s10118-019-2311-3.

Yue Han, Dong-Hao Tang, Guang-Xing Wang, et al. Phthalonitrile Resins Derived from Vanillin: Synthesis, Curing Behavior, and Thermal Properties[J]. Chinese Journal of Polymer Science, 2020, 38(1): 72-83. DOI： 10.1007/s10118-019-2311-3.

摘要

Abstract

Vanillin was used as sustainable source for phthalonitrile monomer synthesis

and allyl/propargyl ether moieties were introduced to improve the processability at the minimal cost of thermal properties. The synthesis route was optimized to minimize side-reactions and simplify post-processing

and the monomers were obtained in high purity and good yields. The curing behavior

mechanism

and processability of the monomers were studied

and the thermal properties of cured polymers were evaluated. Of the two monomers

the allyl ether-containing one exhibited a wide processing window of 185 °C

and was mainly cured into phthalocyanine and linear aliphatic structures through self-catalytic curing process. Also

the glass transition temperature was higher than 500 °C. In contrast

the propargyl ether-containing monomer could only be partially cured

and heat resistance was found to be compromised. Compared with traditional petroleum-based phthalonitrile resins

the bio-based monomers could be cured without the addition of catalysts

and improvement in processability was achieved at no cost of thermal performances.

关键词

Keywords

references

Augustine, D.; Mathew, D.; Reghunadhan, N. C. P . Mechanistic and kinetic aspects of the curing of phthalonitrile monomers in the presence of propargyl groups . Polymer , 2015 . 60 308 - 317 . DOI: 10.1016/j.polymer.2015.01.055 http://doi.org/10.1016/j.polymer.2015.01.055 .

Wang, M.; Ning, Y . Oligosilylarylnitrile: the thermoresistant thermosetting resin with high comprehensive properties . ACS Appl. Mater. Interfaces , 2018 . 10 11933 - 11940 . DOI: 10.1021/acsami.8b00238 http://doi.org/10.1021/acsami.8b00238 .

Phua, E. J. R.; Liu, M.; Cho, B.; Liu, Q.; Amini, S.; Hu, X.; Gan, C. L . Novel high temperature polymeric encapsulation material for extreme environment electronics packaging . Mater. Design , 2018 . 141 202 - 209 . DOI: 10.1016/j.matdes.2017.12.029 http://doi.org/10.1016/j.matdes.2017.12.029 .

Bulgakov, B. A.; Sulimov, A. V.; Babkin, A. V.; Timoshkin, I. A.; Solopchenko, A. V.; Kepman, A. V.; Avdeev, V. V . Phthalonitrile-carbon fiber composites produced by vacuum infusion process . J. Compos. Mater. , 2017 . 51 4157 - 4164 . DOI: 10.1177/0021998317699452 http://doi.org/10.1177/0021998317699452 .

Zong, L.; Liu, C.; Zhang, S.; Wang, J.; Jian, X . Enhanced thermal properties of phthalonitrile networks by cooperating phenyl- s -triazine moieties in backbones . Polymer , 2015 . 77 177 - 188 . DOI: 10.1016/j.polymer.2015.09.035 http://doi.org/10.1016/j.polymer.2015.09.035 .

Han, Y.; Wang, G.; Qiu, W.; Guo, Y.; Sun, Y.; Zhang, Y.; Zhou, H.; Zhao, T . Activated-carbon-supported calcium oxide: a selective and efficient catalyst for nitrile-containing diaryl ether synthesis . Asian J. Org. Chem. , 2018 . 7 2511 - 2517 . DOI: 10.1002/ajoc.v7.12 http://doi.org/10.1002/ajoc.v7.12 .

Xu, Y. L.; Dayo, A. Q.; Derradji, M.; Wang, J.; Liu, W. B.; Song, S.; Tang, T . Copolymerization of bisphthalonitrile/benzoxazine blends: curing behavior, thermomechanical and thermal properties . React. Funct. Polym. , 2018 . 123 97 - 105 . DOI: 10.1016/j.reactfunctpolym.2017.12.013 http://doi.org/10.1016/j.reactfunctpolym.2017.12.013 .

Sastri, S. B.; Armistead, J. P.; Keller, T. M . Phthalonitrile-carbon fiber composites . Polym. Compos. , 1996 . 17 816 - 823 . DOI: 10.1002/(ISSN)1548-0569 http://doi.org/10.1002/(ISSN)1548-0569 .

Song, Y.; Zong, L.; Bao, F.; Li, G.; Wu, Z.; Li, N.; Wang, J.; Jian, X . Reduced curing kinetic energy and enhanced thermal resistance of phthalonitrile resins modified with inorganic particles . Polym. Adv. Technol. , 2018 . 29 1922 - 1929 . DOI: 10.1002/pat.v29.7 http://doi.org/10.1002/pat.v29.7 .

Keller, T. M.; Dominguez, D. D . High temperature resorcinol-based phthalonitrile polymer . Polymer , 2005 . 46 4614 - 4618 . DOI: 10.1016/j.polymer.2005.03.068 http://doi.org/10.1016/j.polymer.2005.03.068 .

Mohanty, A. K.; Vivekanandhan, S.; Pin, J. M.; Misra, M . Composites from renewable and sustainable resources: challenges and innovations . Science , 2018 . 362 536 - 542 . DOI: 10.1126/science.aat9072 http://doi.org/10.1126/science.aat9072 .

Upton, B. M.; Kasko, A. M . Strategies for the conversion of lignin to high-value polymeric materials: review and perspective . Chem. Rev. , 2016 . 116 2275 - 2306 . DOI: 10.1021/acs.chemrev.5b00345 http://doi.org/10.1021/acs.chemrev.5b00345 .

Auvergne, R.; Caillol, S.; David, G.; Boutevin, B.; Pascault, J. P . Biobased thermosetting epoxy: present and future . Chem. Rev. , 2014 . 114 1082 - 1115 . DOI: 10.1021/cr3001274 http://doi.org/10.1021/cr3001274 .

Qi, Y.; Weng, Z.; Wang, J.; Zhang, S.; Zong, L.; Liu, C.; Jian, X . A novel bio-based phthalonitrile resin derived from catechin: synthesis and comparison of curing behavior with petroleum-based counterpart . Polym. Int. , 2018 . 67 322 - 329 . .

Laskoski, M.; Clarke, J. S.; Neal, A.; Harvey, B. G.; Ricks-Laskoski, H. L.; Hervey, W. J.; Daftary, M. N.; Shepherd, A. R.; Keller, T. M . Sustainable high-temperature phthalonitrile resins derived from resveratrol and dihydroresveratrol . ChemistrySelect , 2016 . 1 3423 - 3427 . DOI: 10.1002/slct.201600304 http://doi.org/10.1002/slct.201600304 .

Laskoski, M.; Shepherd, A. R.; Mahzabeen, W.; Clarke, J. S.; Keller, T. M.; Sorathia, U . Sustainable, fire-resistant phthalonitrile-based glass fiber composites . J. Polym. Sci., Part A: Polym. Chem. , 2018 . 56 1128 - 1132 . DOI: 10.1002/pola.v56.11 http://doi.org/10.1002/pola.v56.11 .

Fache, M.; Boutevin, B.; Caillol, S . Vanillin, a key-intermediate of biobased polymers . Eur. Polym. J. , 2015 . 68 488 - 502 . DOI: 10.1016/j.eurpolymj.2015.03.050 http://doi.org/10.1016/j.eurpolymj.2015.03.050 .

Savonnet, E.; Grau, E.; Grelier, S.; Defoort, B.; Cramail, H . Divanillin-based epoxy precursors as DGEBA substitutes for biobased epoxy thermosets . ACS Sustain. Chem. Eng. , 2018 . 6 11008 - 11017 . DOI: 10.1021/acssuschemeng.8b02419 http://doi.org/10.1021/acssuschemeng.8b02419 .

Wang, S.; Ma, S.; Xu, C.; Liu, Y.; Dai, J.; Wang, Z.; Liu, X.; Chen, J.; Shen, X.; Wei, J.; Zhu, J . Vanillin-derived high-performance flame retardant epoxy resins: facile synthesis and properties . Macromolecules , 2017 . 50 1892 - 1901 . DOI: 10.1021/acs.macromol.7b00097 http://doi.org/10.1021/acs.macromol.7b00097 .

Harvey, B. G.; Guenthner, A. J.; Meylemans, H. A.; Haines, S. R. L.; Lamison, K. R.; Groshens, T. J.; Cambrea, L. R.; Davis, M. C.; Lai, W. W . Renewable thermosetting resins and thermoplastics from vanillin . Green Chem. , 2015 . 17 1249 - 1258 . DOI: 10.1039/C4GC01825G http://doi.org/10.1039/C4GC01825G .

Xu, S.; Han, Y.; Guo, Y.; Luo, Z.; Ye, L.; Li, Z.; Zhou, H.; Zhao, Y.; Zhao, T . Allyl phenolic-phthalonitrile resins with tunable properties: curing, processability and thermal stability . Eur. Polym. J. , 2017 . 95 394 - 405 . DOI: 10.1016/j.eurpolymj.2017.08.010 http://doi.org/10.1016/j.eurpolymj.2017.08.010 .

Sheng, H.; Peng, X.; Guo, H.; Yu, X.; Naito, K.; Qu, X.; Zhang, Q . Synthesis of high performance bisphthalonitrile resins cured with self-catalyzed 4-aminophenoxy phthalonitrile . Thermochim. Acta , 2014 . 577 17 - 24 . DOI: 10.1016/j.tca.2013.12.010 http://doi.org/10.1016/j.tca.2013.12.010 .

Smith, M. B.; March, J. March's advanced organic chemistry: reactions, mechanisms, and structure . John Wiley & amp; Sons, 2007 .

Ichikawa, H.; Maruoka, K. The Claisen rearrangement: methods and applications . Wiley-VCH Verlag GmbH & amp; Co, 2007 .

Reghunadhan, N. C. P.; Krishnan, K.; Ninan, K. N . Differential scanning calorimetric study on the Claisen rearrangement and thermal polymerisation of diallyl ether of bisphenols . Thermochim. Acta , 2000 . 359 61 - 67 . DOI: 10.1016/S0040-6031(00)00504-9 http://doi.org/10.1016/S0040-6031(00)00504-9 .

Sumner, M. J.; Sankarapandian, M.; McGrath, J. E.; Riffle, J. S.; Sorathia, U . Flame retardant novolac-bisphthalonitrile structural thermosets . Polymer , 2002 . 43 5069 - 5076 . DOI: 10.1016/S0032-3861(02)00354-3 http://doi.org/10.1016/S0032-3861(02)00354-3 .

Zeng, K.; Zhou, K.; Zhou, S.; Hong, H.; Zhou, H.; Wang, Y.; Miao, P.; Yang, G . Studies on self-promoted cure behaviors of hydroxy-containing phthalonitrile model compounds . Eur. Polym. J. , 2009 . 45 1328 - 1335 . DOI: 10.1016/j.eurpolymj.2008.12.036 http://doi.org/10.1016/j.eurpolymj.2008.12.036 .

Ma, J. Z.; Cheng, K.; Lv, J. B.; Chen, C.; Hu, J. H.; Zeng, K.; Yang, G . Phthalonitrile-PPO blends: cure behavior and properties . Chinese J. Polym. Sci. , 2018 . 36 497 - 504 . .

Hu, J.; Liu, Y.; Jiao, Y.; Ji, S.; Sun, R.; Yuan, P.; Zeng, K.; Pu, X.; Yang, G . Self-promoted phthalimide-containing phthalonitrile resins with sluggish curing process and excellent thermal stability . RSC Adv. , 2015 . 5 16199 - 16206 . DOI: 10.1039/C4RA17306F http://doi.org/10.1039/C4RA17306F .

Guo, H.; Chen, Z.; Liu, X . Effect of processing conditions on physical properties of 3-aminophenoxyphthalonitrile/epoxy laminates . J. Appl. Polym. Sci. , 2014 . 131 39746 .

Zhao, X.; Guo, H.; Lei, Y.; Zhao, R.; Zhong, J.; Liu, X . Effect of polyarylene ether nitriles on processing and mechanical behaviors of phthalonitrile-epoxy copolymers and glass fiber laminated composites . J. Appl. Polym. Sci. , 2013 . 127 4873 - 4878 . DOI: 10.1002/app.38089 http://doi.org/10.1002/app.38089 .

Jiang, M.; Xu, M.; Jia, K.; Liu, X . Copolymerization of self-catalyzed phthalonitrile with bismaleimide toward high-temperature-resistant polymers with improved processability . High Perform. Polym. , 2016 . 28 895 - 907 . DOI: 10.1177/0954008315606955 http://doi.org/10.1177/0954008315606955 .

Views

166

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

The Effect of Curing Cycle on Interlaminar Shear Strength and Thermal Properties of Carbon Fiber Composite of High Temperature Maleimide-containing Phthalonitrile Dual-curing Resin

High-performance Vanillin-derived Dielectric Polymer Films for Sustainable Energy Storage

Structural Optimization of Polyimide Foam via Composition with Hyperbranched Polymer Modified Fluorinated Carbon Nanotubes

Ring-opening Polymerization of 2-Oxabicyclo[2.2.2]octan-3-one and the Influence of Stereochemistry on the Thermal Properties of the Polyesters

Enhancing Processability of Phenylethynyl-terminated Imide Oligomers and Properties of Cured Polyimides via ―CF3 Incorporation

Related Author

Hassan Fattahi

Milad Hatami

Mohammad Reza Ehsani

Mehrzad Mortezaei

Lei-Peng Liu

Bo-Yi Tian

Rui-Ying Xie

Shu-Ping Wei

Related Institution

Department of Polymer Engineering, Composite Research Institute, Faculty of Materials and Manufacturing Technologies, Malek Ashtar University of ‎Technology, Tehran 5

College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology

Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Key Laboratory of Marine Materials and Related Technologies, CAS

College of Polymer Science and Engineering, State Key Laboratory of Polymer Material and Engineering, Sichuan University

Beijing National Laboratory for Molecular Sciences (BNLMS), Key Laboratory of Polym. Chem. & Physics of Ministry of Education, Department of Polymer Science & Engineering, College of Chemistry and Molecular Engineering, Center for Soft Matter Science and Engineering, Peking University

⁰