Wang, J. X.; Huang, Y. B.; Yang, W. T. Photo-grafting poly(acrylic acid) onto poly(lactic acid) chains in solution. Chinese J. Polym. Sci. 2020, 38, 137–142.
Jia-Xing Wang, Yan-Bin Huang, Wan-Tai Yang. Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution[J]. Chinese Journal of Polymer Science, 2020, 38(2): 137-142.
Wang, J. X.; Huang, Y. B.; Yang, W. T. Photo-grafting poly(acrylic acid) onto poly(lactic acid) chains in solution. Chinese J. Polym. Sci. 2020, 38, 137–142.DOI: 10.1007/s10118-019-2308-y.
Jia-Xing Wang, Yan-Bin Huang, Wan-Tai Yang. Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution[J]. Chinese Journal of Polymer Science, 2020, 38(2): 137-142.DOI: 10.1007/s10118-019-2308-y.
Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution
Poly(lactic acid) (PLA) is one of the most important bio-plastics
and chemical modification of the already-polymerized poly(lactic acid) chains may enable optimization of its material properties and expand its application areas. In this study
we demonstrated that poly(lactic acid) can be readily dissolved in acrylic acid at room temperature
and acrylic acid can be graft-polymerized onto poly(lactic acid) chains in solution with the help of photoinitiator benzophenone under 254 nm ultraviolet (UV) irradiation. Similar photo-grafting polymerization of acrylic acid (PAA) has only been studied before in the surface modification of polymer films. The graft ratio could be controlled by various reaction parameters
including irradiation time
benzophenone content
and monomer/polymer ratios. This photo-grafting reaction resulted in high graft ratio (graft ratio PAA/PLA up to 180%) without formation of homopolymers of acrylic acid. When the PAA/PLA graft ratio was higher than 100%
the resulting PLA-
g
-PAA polymer was found dispersible in water. The pros and cons of the photo-grafting reaction were also discussed.
关键词
Keywords
references
Di Lorenzo, M. L.; Androsch R. (eds.) Synthesis, structure and properties of poly(lactic acid) . Springer, Switzerland, 2018 , p. 1.
Aurus, R.; Lim, L.; Selke, S. E. M.; Tsuji, H. (eds.) Poly(lactic acid): synthesis, structures, properties, processing, and applications . Wiley, Canada, 2010 , p. 141.
Krishnan, S.; Pandey, P.; Mohanty, S.; Nayak, S. K . Toughening of poly(lactic acid): an overview of research progress . Polym. Plastic. Tech. Eng. , 2016 . 55 1623 - 1652 . DOI: 10.1080/03602559.2015.1098698 http://doi.org/10.1080/03602559.2015.1098698 .
Ramot, Y.; Haim-Zada, M.; Domb, A. J.; Nyska, A . Biocompatibility and safety of PLA and its copolymers . Adv. Drug Deliver. Rev. , 2016 . 107 153 - 159 . DOI: 10.1016/j.addr.2016.03.012 http://doi.org/10.1016/j.addr.2016.03.012 .
Rasal, R. M.; Janorkar, A. V.; Hirt, D. E . Poly(lactic acid) modifications . Prog. Polym. Sci. , 2010 . 35 338 - 356 . DOI: 10.1016/j.progpolymsci.2009.12.003 http://doi.org/10.1016/j.progpolymsci.2009.12.003 .
Critechfield, F. E.; Koleske, J. V. US Patent 3, 760, 034, 1973.
Wu, C . Improving polylactide/starch biocomposites by grafting polylactide with acrylic acid—characterization and biodegradability assessment . Macromol. Biosci. , 2005 . 5 352 - 361 . DOI: 10.1002/(ISSN)1616-5195 http://doi.org/10.1002/(ISSN)1616-5195 .
Dorman, G.; Nakamura, H.; Pulsipher, A.; Prestwich, G. D . The life of pi star: exploring the exciting and forbidden worlds of the benzophenone photophore . Chem. Rev. , 2016 . 116 15284 - 15398 . DOI: 10.1021/acs.chemrev.6b00342 http://doi.org/10.1021/acs.chemrev.6b00342 .
Yang, W. T.; Ranby, B . Bulk surface photografting process and its applications. I. Reactions and kinetics . J. Appl. Polym. Sci. , 1996 . 62 533 - 543 . DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .
Li, Y.; DeSimone, J. M.; Poon, C.; Samulski, E. T . Photoinduced graft polymerization of styrene onto polypropylene substrates . J. Appl. Polym. Sci. , 1997 . 64 883 - 889 . DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .
Ranby, B.; Yang, W. T. Tretinnikov, V. Tokarev, V.; Xu, Y. H . Lamination of polymer films by bulk surface photografting process and properties . Chinese J. Polym. Sci. , 2001 . 19 123 - 127 . .
Yang, W. T.; Ranby, B . Bulk surface photografting process and its applications. II. Principal factors affecting surface photografting . J. Appl. Polym. Sci. , 1996 . 62 545 - 555 . DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .
Ma, H.; Davis, R. H.; Bowman, C. N . A novel sequential photoinduced living graft polymerization . Macromolecules , 2000 . 33 331 - 335 . DOI: 10.1021/ma990821s http://doi.org/10.1021/ma990821s .
Janorkar, A. V.; Metters, A. T.; Hirt, D. E . Modification of poly(lactic acid) films: enhanced wettability from surface-confined photografting and increased degradation rate due to an artifact of the photografting process . Macromolecules , 2004 . 37 9151 - 9159 . DOI: 10.1021/ma049056u http://doi.org/10.1021/ma049056u .
Ikada, E . Photo- and bio-degradable polyesters, photodegradation behaviours of aliphatic polyesters . J. Photopolym. Sci. Tech. , 1997 . 10 265 - 269 . DOI: 10.2494/photopolymer.10.265 http://doi.org/10.2494/photopolymer.10.265 .
Tsuji, H.; Echizen, Y.; Nishimura, Y . Photodegradation of biodegradable polyesters: a comprehensive study on poly(L-lactide) and poly( ε -caprolactone) . Polym. Degrad. Stab. , 2006 . 91 1128 - 1137 . DOI: 10.1016/j.polymdegradstab.2005.07.007 http://doi.org/10.1016/j.polymdegradstab.2005.07.007 .
Li, L.; Raghupathi, K.; Song, C.; Prasad, P.; Thayumanavan, S . Self-assembly of random copolymers . Chem. Commun. , 2014 . 50 13417 - 13432 . DOI: 10.1039/C4CC03688C http://doi.org/10.1039/C4CC03688C .
Zhou, Y.; Liu, B.; Wang, X . Self-assembly of homopolymers through strong dipole-dipole interaction in their aqueous solutions . Polymer , 2016 . 97 1 - 10 . DOI: 10.1016/j.polymer.2016.05.011 http://doi.org/10.1016/j.polymer.2016.05.011 .
Choucair, A.; Lavigueur, C.; Eisenberg, A . Polystyrene- b -poly(acrylic acid) vesicle size control using solution properties and hydrophilic block length . Langmuir , 2004 . 20 3894 - 3900 . DOI: 10.1021/la035924p http://doi.org/10.1021/la035924p .
McNeill, I. C.; Sadeghi, S. M. T . Thermal-stability and degradation mechanisms of poly(acrylic acid) and its salts. I. Poly(acrylic acid) . Polym. Degrad. Stab. , 1990 . 29 233 DOI: 10.1016/0141-3910(90)90034-5 http://doi.org/10.1016/0141-3910(90)90034-5 .
Enhanced Segment Mobility Promotes Stereocomplex Crystallization in Polymer Blends via Elevated Segmental Miscibility
Bioinspired Zinc-doped Nano Hydroxyapatite Reinforced Poly(lactic acid) Composites for Bone Repair
A Phosphorus/Nitrogen-containing Phosphaphenanthrene Derivative as Flame Retardant for Poly(lactic acid)
Molecularly Engineered Polyimide Films with Switchable Cavitation for Bidirectional Passive Thermal Regulation
pH-Responsive L-Cysteine-conjugated Polydopamine Nanocarriers for Controlled Release of Emamectin Benzoate against Pieris brassicae
Related Author
Zi-Xiang Dai
Yi-Jing Nie
Hong-Xiang Yin
Yang Wang
Yi-Fei Wu
Jin-Jing Li
Xiao Kong
Wen-Hao Mei
Related Institution
Institute of Polymer Materials, School of Materials Science and Engineering, Jiangsu University
Department of Chemistry and Chemical Engineering, SBA School of Science and Engineering, Lahore University of Management Sciences (LUMS), DHA
Changchun SinoBiomaterials Co., Ltd.
School of Life Science, Hubei University
State Key Laboratory of Polymer Science and Technology, Key Laboratory of Polymer Ecomaterials, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences