Enhanced Mechanical Properties of Poly(arylene sulfide sulfone) Membrane by Co-electrospinning with Poly(<italic style="font-style: italic">m</italic>-xylene adipamide)

Lu Chen; Xin-Lin Tuo; Xi-Chuan Fan; Chun-Jie Xie; Bao-Hua Guo; Jian Yu; Ping Hu; Zhao-Xia Guo

doi:10.1007/s10118-019-2297-x

Your Location：

Home >

Browse articles >

Enhanced Mechanical Properties of Poly(arylene sulfide sulfone) Membrane by Co-electrospinning with Poly(m-xylene adipamide)

ARTICLE | Updated：2019-07-11

- Enhanced Mechanical Properties of Poly(arylene sulfide sulfone) Membrane by Co-electrospinning with Poly(m-xylene adipamide)
- Chinese Journal of Polymer Science Vol. 38, Issue 1, Pages: 63-71(2020)
- Affiliations：
  
  Key Laboratory of Advanced Materials (Ministry of Education), Department of Chemical Engineering, Tsinghua University, Beijing 100084, China
- Author bio：
  
  guozx@mail.tsinghua.edu.cn
- Funds：
- DOI：10.1007/s10118-019-2297-x
  CLC：
- Received：10 March 2019，
  
  Revised：2019-1-1，
  
  Accepted：17 May 2019，
  
  Online First：11 July 2019，
  
  Published：2020-01
- Accepted：
Scan QR Code
Citation: Chen, L.; Tuo, X. L.; Fan, X. C.; Xie, C. J.; Guo, B. H.; Yu, J.; Hu, P.; Guo, Z. X. Enhanced mechanical properties of poly(arylene sulfide sulfone) membrane by co-electrospinning with poly(, m,-xylene adipamide). Chinese J. Polym. Sci. 2020, 38, 63–71

Lu Chen, Xin-Lin Tuo, Xi-Chuan Fan, et al. Enhanced Mechanical Properties of Poly(arylene sulfide sulfone) Membrane by Co-electrospinning with Poly(m-xylene adipamide)[J]. Chinese Journal of Polymer Science, 2020, 38(1): 63-71. DOI: 10.1007/s10118-019-2297-x.
Citation: Chen, L.; Tuo, X. L.; Fan, X. C.; Xie, C. J.; Guo, B. H.; Yu, J.; Hu, P.; Guo, Z. X. Enhanced mechanical properties of poly(arylene sulfide sulfone) membrane by co-electrospinning with poly(, m,-xylene adipamide). Chinese J. Polym. Sci. 2020, 38, 63–71 DOI： 10.1007/s10118-019-2297-x.

Lu Chen, Xin-Lin Tuo, Xi-Chuan Fan, et al. Enhanced Mechanical Properties of Poly(arylene sulfide sulfone) Membrane by Co-electrospinning with Poly(m-xylene adipamide)[J]. Chinese Journal of Polymer Science, 2020, 38(1): 63-71. DOI: 10.1007/s10118-019-2297-x. DOI：

摘要

Abstract

The mechanical properties of poly(arylene sulfide sulfone) (PASS) electrospun membrane were significantly enhanced by co-electrospinning with semi-aromatic nylon poly(

-xylene adipamide) (MXD6)

another engineering plastic with high thermal stability and good mechanical properties. The tensile strength of PASS membrane increased with increased incorporation of MXD6

and was tripled when 20% MXD6 was incorporated. The mechanism of the mechanical property improvement is the existence of hydrogen bonding interaction between PASS and MXD6 and between adjacent fibers at the intersections. Thermal properties of the PASS/MXD6 membranes were evaluated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA)

which showed that the membranes could be stably utilized up to 180 °C without any change in appearance and without decomposition. Contact angle measurements of all the membranes showed hydrophobic character. To demonstrate the potential applications of PASS/MXD6 blend membranes

their oil absorption capacities were evaluated with three oils of different viscosities

which proved that the PASS/MXD6 membranes are better absorbents than commercial non-woven polypropylene fibers. Therefore

PASS/MXD6 fibrous membranes produced by electrospinning have a great potential in practical applications.

关键词

Keywords

references

Liu, Z.; Zhang, S. Y.; Huang, G. S.; Zhang, K.; Wang, X. J.; Zhang, G.; Long, S. R.; Yang, J . Effects of polyarylene sulfide sulfone on the mechanical properties of glass fiber cloth-reinforced polyphenylene sulfide composites . High Perform. Polym. , 2015 . 27 145 - 152 . DOI: 10.1177/0954008314541789 http://doi.org/10.1177/0954008314541789 .

Wang, X.; Zhang, M.; Liu, J.; Zhang, G.; Yang, J . Thermal degradation of poly(arylene sulfide sulfone)/ N -methylpyrrolidone crystal solvate . Chinese J. Polym. Sci. , 2010 . 28 85 - 91 . DOI: 10.1007/s10118-010-8215-x http://doi.org/10.1007/s10118-010-8215-x .

Zhang, G.; Yuan, S.; Li, Z.; Long, S.; Yang, J . Poly(arylene ether sulfone) containing thioether units: synthesis, oxidation and properties . RSC Adv. , 2014 . 4 23191 - 23201 . DOI: 10.1039/C4RA02829E http://doi.org/10.1039/C4RA02829E .

Kong, Y.; Huang, G. S.; Zhang, G.; Wang, X. J.; Long, S. R.; Yang, J . The influence of processing aids on the properties of poly(arylene sulfide sulfone) . High Perform. Polym. , 2014 . 26 914 - 921 . DOI: 10.1177/0954008314534278 http://doi.org/10.1177/0954008314534278 .

Liu, Y.; Bhatnagara, A.; Ji, Q.; Riffle, J. S.; McGrath, J. E.; Geibel, J. F.; Kashiwagi, T . Influence of polymerization conditions on the molecular structure stability and physical behavior of poly(phenylene sulfide sulfone) homopolymers . Polymer , 2000 . 41 5137 - 5146 . DOI: 10.1016/S0032-3861(99)00571-6 http://doi.org/10.1016/S0032-3861(99)00571-6 .

Huang, H. M. Electrospinning of poly(arylene sulfide) nanofibers. Master's thesis, Sichuan University (Chengdu), 2007 .

Liu, L.; Wang, X. J.; Wang, Y. Y.; Li, L.; Pan, K.; Yang, J.; Cao, B . Preparation and characterization of asymmetric poly(arylene sulfide sulfone) (PASS) solvent-resistant nanofiltration membranes . Mater. Lett. , 2014 . 132 11 - 14 . DOI: 10.1016/j.matlet.2014.05.154 http://doi.org/10.1016/j.matlet.2014.05.154 .

Yuan, S.S.; Wang, J.; Li, X.; Zhu, J.Y.; Volodine, A.; Wang, X.; Yang, J.; van Puyvelde, P.; van der Bruggen, B . New promising polymer for organic solvent nanofiltration: Oxidized poly(arylene sulfide sulfone) . J. Membr. Sci. , 2018 . 549 438 - 445 . DOI: 10.1016/j.memsci.2017.12.036 http://doi.org/10.1016/j.memsci.2017.12.036 .

Chu, Z.; L.; Feng, Y. J.; Seeger, S . Oil/water separation with selective superantiwetting/superwetting surface materials . Angew. Chem. Int. Ed. , 2015 . 54 2328 - 2338 . DOI: 10.1002/anie.201405785 http://doi.org/10.1002/anie.201405785 .

Gu, G. Q; Han, C. B.; Lu, C. X.; He, C.; Jiang, T.; Gao, Z. L.; Li, C. J.; Wang, Z. L . Triboelectric nanogenerator enhanced nanofiber air filters for efficient particulate matter removal . ACS Nano , 2017 . 11 6211 - 6217 . DOI: 10.1021/acsnano.7b02321 http://doi.org/10.1021/acsnano.7b02321 .

Feng, X.; Wang, B.; Wang, Q. N.; Li, C. J . Preparation and properties of polyacrylonitrile nanofiber membranes used for air filtering by electrospinning . J. Text. Res. , 2017 . 38 6 - 11 . .

Shi, Y. Z.; Yang, D. Z.; Yu, R. M.; Liu, Y. X.; Qu, J.; Liu, B.; Yu, Z. Z . Efficient photocatalytic reduction approach for synthesizing chemically bonded N-doped TiO 2 /reduced graphene oxide hybrid as a freestanding electrode for high-performance lithium storage . ACS Appl. Energy Mater. , 2018 . 1 4186 - 4195 . DOI: 10.1021/acsaem.8b00836 http://doi.org/10.1021/acsaem.8b00836 .

Cheng, H. H.; Chen, F.; Yu, J.; Guo, Z. X . Gold-nanoparticle-decorated thermoplastic polyurethane electrospun fibers prepared through a chitosan linkage for catalytic applications . J. Appl. Polym. Sci. , 2017 . 134 44336 .

Xiong, X.; Li, Q.; Zhang, X. C.; Yu, J.; Guo, Z. X . Preparation, characterization and application of amine-functionalized poly(lactic acid) electrospun fibers . Chemical Journal of Chinese Universities (in Chinese) , 2014 . 35 1323 - 1329 . .

Yuan, Z. Q.; Zhou, T.; Yin, Y. Y.; Cao, R.; Li, C. J.; Wang, Z. L . Transparent and flexible triboelectric sensing array for touch security applications . ACS Nano , 2017 . 11 8364 - 8369 . DOI: 10.1021/acsnano.7b03680 http://doi.org/10.1021/acsnano.7b03680 .

Yu, X. Q.; Zhang, W. S.; Zhang, P. P.; Su, Z. Q . Fabrication technologies and sensing applications of graphene-based composite films: advances and challenges . Biosens. Bioelectron. , 2017 . 89 72 - 84 . DOI: 10.1016/j.bios.2016.01.081 http://doi.org/10.1016/j.bios.2016.01.081 .

Zhang, M. F.; Zhao, X. N.; Zhang, G. H.; Wei, G.; Su, Z. Q . Electrospinning design of functional nanostructures for biosensor applications . J. Mater. Chem. B , 2017 . 5 1699 - 1711 . DOI: 10.1039/C6TB03121H http://doi.org/10.1039/C6TB03121H .

Su, Z. Q.; Ding, J. W.; Wei, G . Electrospinning: A facile technique for fabricating polymeric nanofibers doped with carbon nanotubes and metallic nanoparticles for sensor applications . RSC Adv. , 2014 . 4 52598 - 52610 . DOI: 10.1039/C4RA07848A http://doi.org/10.1039/C4RA07848A .

Guan, X. Y.; Zheng, G. Q.; Dai, K.; Liu, C. T.; Yan, X. R.; Shen, C. Y.; Guo, Z. H . Carbon nanotubes-adsorbed electrospun PA66 nanofiber bundles with improved conductivity and robust flexibility . ACS Appl. Mater. Interfaces , 2016 . 8 14150 - 14159 . DOI: 10.1021/acsami.6b02888 http://doi.org/10.1021/acsami.6b02888 .

Zheng, Y. J.; Li, Y. L.; Dai, K.; Liu, M. R.; Zhou, K. K.; Zheng, G. Q.; Liu, C. T.; Shen, C. Y . Conductive thermoplastic polyurethane composites with tunable piezoresistivity by modulating the filler dimensionality for flexible strain sensors . Compos. Part A Appl. Sci. Manuf. , 2017 . 101 41 - 49 . DOI: 10.1016/j.compositesa.2017.06.003 http://doi.org/10.1016/j.compositesa.2017.06.003 .

Lin, J. Y.; Tian, F.; Shang, Y. W.; Wang, F. J.; Ding, B.; Yu, J. Y . Facile control of intra-fiber porosity and inter-fiber voids in electrospun fibers for selective adsorption . Nanoscale , 2012 . 4 5316 - 5320 . DOI: 10.1039/c2nr31515g http://doi.org/10.1039/c2nr31515g .

Yu, R. M.; Shi, Y. Z.; Yang, D. Z.; Liu, Y. X.; Qu, J.; Yu, Z. Z . Graphene oxide/chitosan aerogel microspheres with honeycomb-cobweb and radially oriented microchannel structures for broad- spectrum and rapid adsorption of water contaminants . ACS Appl. Mater. Interfaces , 2017 . 9 21809 - 21819 . DOI: 10.1021/acsami.7b04655 http://doi.org/10.1021/acsami.7b04655 .

Liu, Y. M.; Li, Q.; Liu, H. H.; Cheng, H. H.; Yu, J.; Guo, Z. X . Antibacterial thermoplastic polyurethane electrospun fiber mats prepared by 3-aminopropyltriethoxysilane-assisted adsorption of Ag nanoparticles . Chinese J. Polym. Sci. , 2017 . 35 713 - 720 . DOI: 10.1007/s10118-017-1928-3 http://doi.org/10.1007/s10118-017-1928-3 .

Li, P.; Zhang, Z. F.; Su, Z. Q.; Wei, G . Thermosensitive polymeric micelles based on the triblock copolymer poly(D,L-lactide)- b -poly( N -isopropyl acrylamide)- b -poly(D,L-lactide) for controllable drug delivery . J. Appl. Polym. Sci. , 2017 . 134 45304 DOI: 10.1002/app.45304 http://doi.org/10.1002/app.45304 .

Behrens, A. M.; Sikorski, M. J.; Kofinas, P . Hemostatic strategies for traumatic and surgical bleeding . J. Biomed. Mater. Res. A , 2014 . 102 4182 - 4194 . DOI: 10.1002/jbm.a.v102.11 http://doi.org/10.1002/jbm.a.v102.11 .

Cheng, H. H.; Xiong, J.; Xie, Z. N.; Zhu, Y. T.; Liu, Y. M.; Wu, Z. Y.; Yu, J.; Guo, Z. X . Thrombin-loaded poly(butylene succinate)-based electrospun membranes for rapid hemostatic application . Macromol. Mater. Eng. , 2018 . 303 1700395 DOI: 10.1002/mame.v303.2 http://doi.org/10.1002/mame.v303.2 .

Zhang, W. S.; Yu, X. Q.; Li, Y.; Su, Z. Q.; Jandt, K. D.; Wei, G . Protein-mimetic peptide nanofibers: motif design, self-assembly synthesis, and sequence-specific biomedical applications . Prog. Polym. Sci. , 2018 . 80 94 - 124 . DOI: 10.1016/j.progpolymsci.2017.12.001 http://doi.org/10.1016/j.progpolymsci.2017.12.001 .

Khorshidi, S.; Solouk, A.; Mirzadeh, H.; Mazinani, S.; Lagaron, J. M.; Sharifi, S.; Ramakrishna, S . A review of key challenges of electrospun scaffolds for tissue-engineering applications: challenges regarding electrospun scaffolds: A review . J. Tissue Eng. Regen. Med. , 2016 . 10 715 - 738 . DOI: 10.1002/term.v10.9 http://doi.org/10.1002/term.v10.9 .

Dhandayuthapani, B.; Krishnan, U. M.; Sethuraman, S . Fabrication and characterization of chitosan-gelatin blend nanofibers for skin tissue engineering . J. Biomed. Mater. Res. B Appl. Biomater. , 2010 . 264 - 272 . .

Lee, J.; Tae, G.; Kim, Y. H.; Park, I. S.; Kim, S. H.; Kim, S. H . The effect of gelatin incorporation into electrospun poly(L-lactide- co - ε -caprolactone) fibers on mechanical properties and cytocompatibility . Biomaterials , 2008 . 29 1872 - 1879 . DOI: 10.1016/j.biomaterials.2007.12.029 http://doi.org/10.1016/j.biomaterials.2007.12.029 .

Chen, L.; Cheng, H. H.; Xiong, J.; Zhu, Y. T.; Zhang, H. P.; Xiong, X.; Liu, Y. M.; Yu, J.; Guo, Z. X . The effect of gelatin incorporation into electrospun poly(L-lactide- co - ε -caprolactone) fibers on mechanical properties and cytocompatibility . Chinese J. Polym. Sci. , 2018 . 36 1063 - 1069 . DOI: 10.1007/s10118-018-2112-0 http://doi.org/10.1007/s10118-018-2112-0 .

Zhang, B. Y.; Ge, Q. S.; Guo, Z. X.; Yu, J . Effects of electrically inert fillers on the properties of poly( m -xylene adipamide)/multiwalled carbon nanotube composites . Chinese J. Polym. Sci. , 2016 . 34 1032 - 1038 . DOI: 10.1007/s10118-016-1821-5 http://doi.org/10.1007/s10118-016-1821-5 .

Guo, Y. L.; Zhang, R. Z.; Wu, K.; Chen, F.; Fu, Q . Preparation of nylon MXD6/EG/CNTs ternary composites with excellent thermal conductivity and electromagnetic interference shielding effectiveness . Chinese J. Polym. Sci. , 2017 . 35 1497 - 1507 . DOI: 10.1007/s10118-017-1985-7 http://doi.org/10.1007/s10118-017-1985-7 .

Tan, Y. L.; Huang, C. H.; Guo, Z. X.; Yu, J . Water absorption characteristics of different polyamide resins and their effects on the diffusion and polymerization of St monomer . Chemical Journal of Chinese Universities (in Chinese) , 2018 . 39 2825 - 2832 . .

Doudou, B. B.; Dargent, E.; Grenet, J . Crystallization and melting behaviour of poly( m -xylene adipamide) . J. Therm. Anal. Calorim. , 2006 . 85 409 - 415 . DOI: 10.1007/s10973-005-7299-y http://doi.org/10.1007/s10973-005-7299-y .

Liu, H. H.; Li, Q.; Liang, X.; Xiong, X.; Yu, J.; Guo, Z. X . Antibacterial polycaprolactone electrospun fiber mats prepared by soluble eggshell membrane protein-assisted adsorption of silver nanoparticles . J. Appl. Polym. Sci. , 2016 . 133 43850 .

Feng, L. D.; Bian, X. C.; Li, G.; Chen, Z. M.; Cui, Y.; Chen, X. S . Determination of ultra-low glass transition temperature via differential scanning calorimetry . Polym. Test. , 2013 . 32 1368 - 1372 . DOI: 10.1016/j.polymertesting.2013.08.015 http://doi.org/10.1016/j.polymertesting.2013.08.015 .

Lim, H. S.; Park, S. H.; Koo, S. H.; Kwark, Y. J.; Thomas, E. L.; Jeong, Y. J.; Cho, J. H . Superamphiphilic Janus fabric . Langmuir , 2010 . 26 19159 - 19162 . DOI: 10.1021/la103829c http://doi.org/10.1021/la103829c .

Ma, M. L.; Hill, R. M.; Rutledge, G. C . A review of recent results on superhydrophobic materials based on micro- and nanofibers . J. Adhes. Sci. Technol. , 2008 . 22 1799 - 1817 . DOI: 10.1163/156856108X319980 http://doi.org/10.1163/156856108X319980 .

Li, H. Y.; Li, Y.; Yang, W. M.; Cheng, L. S.; Tan, J . Needleless melt-electrospinning of biodegradable poly(lactic acid) ultrafine fibers for the removal of oil from water . Polymers , 2017 . 9 3 DOI: 10.3390/polym9020003 http://doi.org/10.3390/polym9020003 .

Qiao, Y.; Zhao, L. L.; Li, P.; Sun, H. X.; Li, S . Electrospun polystyrene/polyacrylonitrile fiber with high oil sorption capacity . J. Reinf. Plast. Compos. , 2014 . 33 1849 - 1858 . DOI: 10.1177/0731684414547554 http://doi.org/10.1177/0731684414547554 .

Ji, H.; Zhao, R.; Li, Y. M.; Sun, B. L.; Li, Y. Z.; Zhang, N.; Qiu, J.; Li, X.; Wang, C . Robust and durable superhydrophobic electrospun nanofibrous mats via a simple Cu nanocluster immobilization for oil-water contamination . Colloids Surf. Physicochem. Eng. Asp. , 2018 . 538 173 - 183 . DOI: 10.1016/j.colsurfa.2017.10.064 http://doi.org/10.1016/j.colsurfa.2017.10.064 .

Lin, J. Y.; Tian, F.; Shang, Y. W.; Wang, F. J.; Ding, B.; Yu, J. Y.; Guo, Z . Co-axial electrospun polystyrene/polyurethane fibres for oil collection from water surface . Nanoscale , 2013 . 5 2745 - 2755 . DOI: 10.1039/c3nr34008b http://doi.org/10.1039/c3nr34008b .

Zaarour, B.; Zhu, L.; Huang, C.; Jin, X. Y . Controlling the secondary surface morphology of electrospun PVDF nanofibers by regulating the solvent and relative humidity . Nanoscale Res. Lett. , 2018 . 13 285 DOI: 10.1186/s11671-018-2705-0 http://doi.org/10.1186/s11671-018-2705-0 .

Wang, J.; Hou, J. B.; Marquez, E.; Moore, R. B.; Nain, A. S . Aligned assembly of nano and microscale polystyrene tubes with controlled morphology . Polymer , 2014 . 55 3008 - 3014 . DOI: 10.1016/j.polymer.2014.04.046 http://doi.org/10.1016/j.polymer.2014.04.046 .

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Improved Mechanical Properties of Poly(butylene succinate) Membrane by Co-electrospinning with Gelatin

Improvements of Hydrophobicity and Toughness of Epoxy Coatings Modified with Hydroxyl-terminated Fluororubber

Effects of Different Nucleating Agents, Annealing and Pre-stretching Process on the Crystallinity and Mechanical Properties of Poly(butylene carbonate)

Advancing the Thin-film Mechanics of Conjugated Polymers: Characterization, Modulation, and Innovation

Enhanced Mechanical Properties and Prolonged Recovery Onset Period of Timed Shape Memory Hydrogels via Hydrophobic Interaction

Related Author

Hui-hui Cheng

Jiang Xiong

Ya-Ting Zhu

Hong-Peng Zhang

Xi Xiong

Yu-man Liu

Yu-Tong Zhou

You-Fan Wu

Related Institution

Department of Vascular and Endovascular Surgery, Chinese PLA General Hospital

School of Materials Science and Engineering, Chang’an University

Shaanxi Union Research Center of University and Enterprise for Advanced Transportation Infrastructure Materials

College of Water Conservancy & Architectural Engineering, Shihezi University

Chengdu Institute of Organic Chemistry, Chinese Academy of Sciences

⁰

Enhanced Mechanical Properties of Poly(arylene sulfide sulfone) Membrane by Co-electrospinning with Poly(m-xylene adipamide)

DOI：10.1007/s10118-019-2297-x

摘要

Abstract

关键词

Keywords

references