Effect of Molybdenum Disulfide Exfoliation Conditions on the Mechanical Properties of Epoxy Nanocomposites

Bin Chen; Bao-Jia Ni; Meng-Xiang Fu; Hang Zhong; Wei-Feng Jiang; Si-Yuan Liu; He-Xin Zhang; Keun-Byoung Yoon

doi:10.1007/s10118-019-2239-7

Your Location：

Home >

Browse articles >

Effect of Molybdenum Disulfide Exfoliation Conditions on the Mechanical Properties of Epoxy Nanocomposites

ARTICLE | Updated：2021-02-18

- Effect of Molybdenum Disulfide Exfoliation Conditions on the Mechanical Properties of Epoxy Nanocomposites
- Chinese Journal of Polymer Science Vol. 37, Issue 7, Pages: 687-692(2019)
- Affiliations：
  
  a.School of Materials Science and Engineering, Shenyang University of Chemical Technology, Shenyang 110142, China
  b.School of Chemistry & Chemical Engineering, Anhui University of Technology, Maanshan 143032, China
  c.Department of Polymer Science and Engineering, Kyungpook National University, South Korea
- Author bio：
  
  13080896558@163.com (B.C.)
  polyhx@ciac.ac.cn (H.X.Z.)
  kbyoon@knu.ac.kr (K.B.Y.)
- Funds：
- DOI：10.1007/s10118-019-2239-7
  CLC：
- Received：25 December 2018，
  
  Revised：2019-1-25，
  
  Accepted：12 February 2019，
  
  Online First：26 March 2019，
  
  Published：2019-07
- Accepted：
Scan QR Code
Citation: Chen, B.; Ni, B. J.; Fu, M. X.; Zhong, H.; Jiang, W. F.; Liu, S. Y.; Zhang, H. X.; Yoon, K. B. Effect of molybdenum disulfide exfoliation conditions on the mechanical properties of epoxy nanocomposites. Chinese J. Polym. Sci. 2019, 37, 687–692

Bin Chen, Bao-Jia Ni, Meng-Xiang Fu, et al. Effect of Molybdenum Disulfide Exfoliation Conditions on the Mechanical Properties of Epoxy Nanocomposites[J]. Chinese Journal of Polymer Science, 2019, 37(7): 687-692.
Citation: Chen, B.; Ni, B. J.; Fu, M. X.; Zhong, H.; Jiang, W. F.; Liu, S. Y.; Zhang, H. X.; Yoon, K. B. Effect of molybdenum disulfide exfoliation conditions on the mechanical properties of epoxy nanocomposites. Chinese J. Polym. Sci. 2019, 37, 687–692 DOI： 10.1007/s10118-019-2239-7.

Bin Chen, Bao-Jia Ni, Meng-Xiang Fu, et al. Effect of Molybdenum Disulfide Exfoliation Conditions on the Mechanical Properties of Epoxy Nanocomposites[J]. Chinese Journal of Polymer Science, 2019, 37(7): 687-692. DOI： 10.1007/s10118-019-2239-7.

摘要

Abstract

In this work

the MoS

fillers were prepared through chemical exfoliation method and used as fillers to fabricate epoxy (EP)/MoS

nanocomposites. The effects of molybdenum disulfide (MoS

) intercalation conditions on the properties of EP/MoS

nanocomposites were investigated. As the intercalation time was prolonged

the surface of MoS

exhibited a totally crumpled structure and more functional groups formed. Because of the higher functional group concentration

the interfacial adhesion force between EP and MoS

was enhanced. With the addition of 1.0 wt% exfoliated MoS

fillers

the tensile strength and tensile modulus of EP were even improved ~500% and ~6800%

respectively. Therefore

this work provides a facile way to produce high-performance EP nanocomposites.

关键词

Keywords

references

Li, A.; Xu, W.; Wang, G.; Wang, X . Novel strategy for molybdenum disulfide nanosheets grown on titanate nanotubes for enhancing the flame retardancy and smoke suppression of epoxy resin . J. Appl. Polym. Sci. , 2017 . 135 46064 DOI: 10.1002/app.46064 http://doi.org/10.1002/app.46064 .

Qiang, H.; Liu, M.; Chen, J.; Wan, Q.; Tian, J.; Long, H.; Jiang, R.; Wen, Y.; Zhang, X.; Wei, Y . Facile preparation of MoS 2 based polymer composites via mussel inspired chemistry and their high efficiency for removal of organic dyes . Appl. Surf. Sci. , 2017 . 419 35 - 44 . DOI: 10.1016/j.apsusc.2017.05.006 http://doi.org/10.1016/j.apsusc.2017.05.006 .

Zhang, H. X.; Ko, E. B.; Park, J. H.; Moon, Y. K.; Park, B. S.; Zhang, X. Q.; Yoon, K. B . Preparation and properties of polyethylene/dodecanethiol-MoS 2 nanocomposites with dodecanethiol-MoS 2 /MgCl 2 -supported Ziegler-Natta catalyst via an in situ polymerization method . Polymer , 2017 . 108 223 - 229 . DOI: 10.1016/j.polymer.2016.11.069 http://doi.org/10.1016/j.polymer.2016.11.069 .

Xuan, D.; Zhou, Y.; Nie, W.; Chen, P . Sodium alginate-assisted exfoliation of MoS 2 and its reinforcement in polymer nanocomposites . Carbohydr. Polym. , 2017 . 155 40 - 48 . DOI: 10.1016/j.carbpol.2016.08.052 http://doi.org/10.1016/j.carbpol.2016.08.052 .

Sorrentino, A.; Altavilla, C.; Merola, M.; Senatore, A.; Ciambelli, P.; Iannace, S . Nanosheets of MoS 2 -oleylamine as hybrid filler for self-lubricating polymer composites: Thermal, tribological, and mechanical properties . Polym. Compos. , 2015 . 36 1124 - 1134 . DOI: 10.1002/pc.v36.6 http://doi.org/10.1002/pc.v36.6 .

O’Neill, A.; Khan, U.; Coleman, J. N . Preparation of high concentration dispersions of exfoliated MoS 2 with increased flake size . Chem. Mater. , 2012 . 24 2414 - 2421 . DOI: 10.1021/cm301515z http://doi.org/10.1021/cm301515z .

Castellanos-Gomez, A.; Poot, M.; Steele, G. A.; Hs, V. D. Z.; Agraït, N.; Rubio-Bollinger, G . Elastic properties of freely suspended MoS 2 nanosheets . Adv. Mater. , 2012 . 24 772 - 775 . DOI: 10.1002/adma.201103965 http://doi.org/10.1002/adma.201103965 .

Thakur, V. K.; Thakur, M. K . Processing and characterization of natural cellulose fibers/thermoset polymer composites . Carbohydr. Polym. , 2014 . 109 102 - 117 . DOI: 10.1016/j.carbpol.2014.03.039 http://doi.org/10.1016/j.carbpol.2014.03.039 .

Nichols, M. E.; Gerlock, J. L . Rates of photooxidation induced crosslinking and chain scission in thermoset polymer coatings II. Effect of hindered amine light stabilizer and ultraviolet light absorber additives . Polym. Degrad. Stab. , 2000 . 69 197 - 207 . DOI: 10.1016/S0141-3910(00)00061-6 http://doi.org/10.1016/S0141-3910(00)00061-6 .

Gorowara, R. L.; Kosik, W. E.; Mcknight, S. H.; Mccullough, R. L . Molecular characterization of glass fiber surface coatings for thermosetting polymer matrix/glass fiber composites . Compos. Part A-Appl. Sci. Manuf. , 2001 . 32 323 - 329 . DOI: 10.1016/S1359-835X(00)00112-3 http://doi.org/10.1016/S1359-835X(00)00112-3 .

Brennan, B.; Spencer, S. J.; Belsey, N. A.; Faris, T.; Cronin, H.; Silva, S. R. P.; Sainsbury, T.; Gilmore, I. S.; Stoeva, Z.; Pollard, A. J . Structural, chemical and electrical characterisation of conductive graphene-polymer composite films . Appl. Surf. Sci. , 2017 . 403 403 - 412 . DOI: 10.1016/j.apsusc.2017.01.132 http://doi.org/10.1016/j.apsusc.2017.01.132 .

Dong, H.; Yi, X.; Au, X.; Zhang, C.; Yan, L.; Deng, H . Development of interleaved fibre-reinforced thermoset polymer matrix composites . Acta Materiae Compositae Sinica , 2014 . 31 273 - 285 . .

Wang, J.; Zhang, D.; Zhang, Y.; Cai, W.; Yao, C.; Hu, Y.; Hu, W . Construction of multifunctional boron nitride nanosheet towards reducing toxic volatiles (CO and HCN) generation and fire hazard of thermoplastic polyurethane . J. Hazard. Mater. , 2019 . 362 482 - 494 . DOI: 10.1016/j.jhazmat.2018.09.009 http://doi.org/10.1016/j.jhazmat.2018.09.009 .

Wu, K.; Song, L.; Hu, Y.; Lu, H.; Kandola, B. K.; Kandare, E . Synthesis and characterization of a functional polyhedral oligomeric silsesquioxane and its flame retardancy in epoxy resin . Prog. Org. Coat. , 2009 . 65 490 - 497 . DOI: 10.1016/j.porgcoat.2009.04.008 http://doi.org/10.1016/j.porgcoat.2009.04.008 .

Ying, L.; Mao, S . Study on the properties and application of epoxy resin/polyurethane semi‐interpenetrating polymer networks . J. Appl. Polym. , 1996 . 61 2059 - 2063 . DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .

Lakouraj, M. M.; Rahpaima, G.; Zare, E. N. . Effect of functionalized magnetite nanoparticles and diaminoxanthone on the curing, thermal degradation kinetic and corrosion property of diglycidyl ether of bisphenol A-based epoxy resin . Chinese J. Polym. Sci. , 2014 . 32 1489 - 1499 . DOI: 10.1007/s10118-014-1535-5 http://doi.org/10.1007/s10118-014-1535-5 .

Yan, H.; Jing, D. Q.; Hou, X. L . Chemical degradation of amine-cured DGEBA epoxy resin in supercritical 1-propanol for recycling carbon fiber from composites . Chinese J. Polym. Sci. , 2014 . 32 1550 - 1563 . DOI: 10.1007/s10118-014-1519-5 http://doi.org/10.1007/s10118-014-1519-5 .

Azeez, A. A.; Rhee, K. Y.; Park, S. J.; Hui, D . Epoxy clay nanocomposites-Processing, properties and applications: A review . Compos. Part B-Eng. , 2013 . 45 308 - 320 . DOI: 10.1016/j.compositesb.2012.04.012 http://doi.org/10.1016/j.compositesb.2012.04.012 .

Jiang, X.; Sun, Y.; Zhang, H.; Hou, L . Preparation and characterization of quaternized poly(vinyl alcohol)/chitosan/MoS 2 composite anion exchange membranes with high selectivity . Carbohydr. Polym. , 2017 . 180 96 - 103 . DOI: 10.1016/j.carbpol.2017.10.023 http://doi.org/10.1016/j.carbpol.2017.10.023 .

Feng, X.; Wen, P.; Cheng, Y.; Liu, L.; Tai, Q.; Hu, Y.; Liew, K. M . Defect-free MoS 2 nanosheets: Advanced nanofillers for polymer nanocomposites . Compos. Part A-Appl. Sci. Manuf. , 2016 . 81 61 - 68 . DOI: 10.1016/j.compositesa.2015.11.002 http://doi.org/10.1016/j.compositesa.2015.11.002 .

Wang, X.; Xing, W.; Feng, X.; Yu, B.; Song, L.; Guan, H. Y.; Hu, Y . Enhanced mechanical and barrier properties of polyurethane nanocomposite films with randomly distributed molybdenum disulfide nanosheets . Compos. Sci. Technol. , 2016 . 127 142 - 148 . DOI: 10.1016/j.compscitech.2016.02.029 http://doi.org/10.1016/j.compscitech.2016.02.029 .

Matusinovic, Z.; Shukla, R.; Manias, E.; Hogshead, C. G.; Wilkiea, C. A . Polystyrene/molybdenum disulfide and poly(methyl methacrylate)/molybdenum disulfide nanocomposites with enhanced thermal stability . Polym. Degrad. Stab. , 2012 . 97 2481 - 2486 . DOI: 10.1016/j.polymdegradstab.2012.07.004 http://doi.org/10.1016/j.polymdegradstab.2012.07.004 .

Wang, J.; Ma, C.; Mu, X.; Cai, W.; Liu, L.; Zhou, X.; Hu, W.; Hu, Y . Construction of multifunctional MoSe 2 hybrid towards the simultaneous improvements in fire safety and mechanical property of polymer . J. Hazard. Mater. , 2018 . 352 36 - 46 . DOI: 10.1016/j.jhazmat.2018.03.003 http://doi.org/10.1016/j.jhazmat.2018.03.003 .

Zhou, K.; Liu, J.; Gui, Z.; Hu, Y.; Jiang, S . The influence of melamine phosphate modified MoS 2 on the thermal and flammability of poly(butylene succinate) composites: The influence of melamine phosphate modified MoS 2 . Polym. Adv. Technol. , 2016 . 27 1397 - 1400 . DOI: 10.1002/pat.v27.10 http://doi.org/10.1002/pat.v27.10 .

Zeng, G.; Liu, M.; Liu, X.; Huang, Q.; Xu, D.; Mao, L.; Huang, H.; Deng, F.; Zhang, X.; Wei, Y . Mussel inspired preparation of MoS 2 based polymer nanocomposites: The case of polyPEGMA . Appl. Surf. Sci. , 2016 . 387 399 - 405 . DOI: 10.1016/j.apsusc.2016.05.093 http://doi.org/10.1016/j.apsusc.2016.05.093 .

Zhou, K.; Liu, J.; Shi, Y.; Jiang, S.; Wang, D.; Hu, Y.; Gui, Z . MoS 2 nanolayers grown on carbon nanotubes: An advanced reinforcement for epoxy composites . ACS Appl. Mater. Interface , 2015 . 7 6070 - 6081 . DOI: 10.1021/acsami.5b00762 http://doi.org/10.1021/acsami.5b00762 .

Eksik, O.; Gao, J.; Shojaee, S. A.; Thomas, A.; Chow, P.; Bartolucci, S. F.; Lucca, D. A.; Koratkar, N . Epoxy nanocomposites with two-dimensional transition metal dichalcogenide additives . ACS Nano , 2014 . 8 5282 - 5289 . DOI: 10.1021/nn5014098 http://doi.org/10.1021/nn5014098 .

Chen, B.; Ni, B. J.; Liu, W. T.; Ye, Q. Y.; Liu, S. Y.; Zhang, H. X.; Yoon, K. B . Mechanical properties of epoxy nanocomposites filled with melamine functionalized molybdenum disulfide . RSC Adv. , 2018 . 8 20450 - 20455 . DOI: 10.1039/C8RA02689K http://doi.org/10.1039/C8RA02689K .

Divigalpitiya, W. M. R.; Frindt, R. F.; Morrison, S. R . Inclusion systems of organic molecules in restacked single-layer molybdenum disulfide . Science , 1989 . 246 369 - 71 . DOI: 10.1126/science.246.4928.369 http://doi.org/10.1126/science.246.4928.369 .

Divigalpitiya, W. M. R.; Morrison, S. R.; Frindt, R. F . Thin oriented films of molybdenum disulphide . Thin Solid Films , 1990 . 186 177 - 192 . DOI: 10.1016/0040-6090(90)90511-B http://doi.org/10.1016/0040-6090(90)90511-B .

Gönen, M.; Egbuchunam, T. O.; Balköse, D.; İnal, F.; Ülkü, S . Preparation and characterization of magnesium stearate, cobalt stearate, and copper stearate and their effects on poly(vinyl chloride) dehydrochlorination . J. Vinyl Addit. Technol. , 2014 . 47 131 - 137 . DOI: 10.1002/vnl.21384 http://doi.org/10.1002/vnl.21384 .

Guo, Y.; Wang, Z.; Shao, H.; Jiang, X . Hydrothermal synthesis of highly fluorescent carbon nanoparticles from sodium citrate and their use for the detection of mercury ions . Carbon , 2013 . 52 583 - 589 . DOI: 10.1016/j.carbon.2012.10.028 http://doi.org/10.1016/j.carbon.2012.10.028 .

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Bio-derived Flame-retardant Curing Agents Enable One-step, Ambient Synthesis of Ultra-tough, Smoke-suppressed Epoxy

DISPERSION OF GRAPHENE OXIDE AND ITS FLAME RETARDANCY EFFECT ON EPOXY NANOCOMPOSITES

Improvements of Hydrophobicity and Toughness of Epoxy Coatings Modified with Hydroxyl-terminated Fluororubber

Effects of Different Nucleating Agents, Annealing and Pre-stretching Process on the Crystallinity and Mechanical Properties of Poly(butylene carbonate)

2026-9 Contents

Related Author

Hang-Tian Hu

Dan Xie

Zheng-Hong Guo

Feng-Qing Chen

Xing-Wei He

Gao-Bo Lou

Jin-Feng Dai

Li-Na Liu

Related Institution

School of Chemistry and Materials Engineering, Zhejiang A & F University

Key Laboratory of Wood Science and Technology of Zhejiang Province, Zhejiang A & F University

Institute of Fire Safety Materials, School of Materials Science and Engineering, Ningbo Tech University

Beijing Key Laboratory on Preparation and Processing of Novel Polymeric Materials, Department of Polymer Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology

State Key Laboratory of Chemical Resource Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology

⁰