Modeling of the Mechanical Properties of Blend Based Polymer Nanocomposites Considering the Effects of Janus Nanoparticles on Polymer/Polymer Interface

Esmail Sharifzadeh

doi:10.1007/s10118-019-2178-3

Your Location：

Home >

Browse articles >

Modeling of the Mechanical Properties of Blend Based Polymer Nanocomposites Considering the Effects of Janus Nanoparticles on Polymer/Polymer Interface

ARTICLE | Updated：2021-02-18

- Modeling of the Mechanical Properties of Blend Based Polymer Nanocomposites Considering the Effects of Janus Nanoparticles on Polymer/Polymer Interface
- Chinese Journal of Polymer Science Vol. 37, Issue 2, Pages: 164-177(2019)
- Affiliations：
  
  Department of Chemistry, Payame Noor University, Tehran, Iran
- Author bio：
  
  E_sharifzadeh@sut.ac.ir
- Funds：
- DOI：10.1007/s10118-019-2178-3
  CLC：
- Received：23 June 2018，
  
  Revised：2018-7-15，
  
  Accepted：01 August 2018，
  
  Online First：31 August 2018，
  
  Published：2019-02
- Accepted：
Scan QR Code
Citation: Sharifzadeh, E. Modeling of the mechanical properties of blend based polymer nanocomposites considering the effects of Janus nanoparticles on polymer/polymer Interface. Chinese J. Polym. Sci. 2019, 37, 164–177

Esmail Sharifzadeh. Modeling of the Mechanical Properties of Blend Based Polymer Nanocomposites Considering the Effects of Janus Nanoparticles on Polymer/Polymer Interface[J]. Chinese Journal of Polymer Science, 2019, 37(2): 164-177.
Citation: Sharifzadeh, E. Modeling of the mechanical properties of blend based polymer nanocomposites considering the effects of Janus nanoparticles on polymer/polymer Interface. Chinese J. Polym. Sci. 2019, 37, 164–177 DOI： 10.1007/s10118-019-2178-3.

Esmail Sharifzadeh. Modeling of the Mechanical Properties of Blend Based Polymer Nanocomposites Considering the Effects of Janus Nanoparticles on Polymer/Polymer Interface[J]. Chinese Journal of Polymer Science, 2019, 37(2): 164-177. DOI： 10.1007/s10118-019-2178-3.

摘要

Abstract

Blend based polymer nanocomposites

comprising Janus nanoparticles at their polymer/polymer interface

were analytically/experimentally evaluated. The modeling procedure was performed in two stages: first

modeling of polymer/polymer interface region comprising Janus nanoparticles and second

modeling of the entire systems as a function of the variation of the blend morphology. In the first stage

the modeling procedure was performed based on the development of the model proposed by Ji

et al

. and in the second stage

the fundamental of Kolarik’s model was used in order to propose a developed and more practical model. It was shown that Janus nanoparticles may form dual polymer/particle interphase at polymer/polymer interface which can drastically affect the final mechanical properties of the system. Comparing the results of tensile tests imposed on different prepared samples with the predictions of the model proved its accuracy and reliability (error

9%).

关键词

Keywords

references

Fathi, A.; Lee, S.; Breen, A.; Shirazi, A. N.; Valtchev, P.; Dehghani, F . Enhancing the mechanical properties and physical stability of biomimetic polymer hydrogels for micro-patterning and tissue engineering applications . Eur. Polym. J. , 2014 . 59 161 - 170 . DOI: 10.1016/j.eurpolymj.2014.07.011 http://doi.org/10.1016/j.eurpolymj.2014.07.011 .

Minaei-Zaim, M.; Ghasemi, I.; Karrabi, M.; Azizi, H . Effect of injection molding parameters on properties of cross-linked low-density polyethylene/ethylene vinyl acetate/organoclay nanocomposite foams . Iran Polym. J. , 2012 . 21 537 - 546 . DOI: 10.1007/s13726-012-0059-5 http://doi.org/10.1007/s13726-012-0059-5 .

Shaw, M. T. in Preparation of blends. in polymer blends and mixtures . Walsh, D. J.; Higgins, J. S.; Maconnachie, A., Eds. Springer Netherlands, Dordrecht, 1985 , p57-67

Galloway, J. A.; Macosko, C. W . Comparison of methods for the detection of cocontinuity in poly(ethylene oxide)/polystyrene blends . Polym. Eng. Sci. , 2004 . 44 714 - 727 . DOI: 10.1002/(ISSN)1548-2634 http://doi.org/10.1002/(ISSN)1548-2634 .

Zaikov, G. E.; Bazylyak, L. I.; Haghi, A. K. in Functional polymer blends and nanocomposites: A practical engineering approach . Apple Academic Press, 2014

Miles, I. S.; Zurek, A . Preparation, structure, and properties of two-phase co-continuous polymer blends . Polym. Eng. Sci. , 1988 . 28 796 - 805 . DOI: 10.1002/(ISSN)1548-2634 http://doi.org/10.1002/(ISSN)1548-2634 .

Pivsa-Art, W.; Chaiyasat, A.; Pivsa-Art, S.; Yamane, H.; Ohara, H . Preparation of polymer blends between poly(lactic acid) and poly(butylene adipate- co -terephthalate) and biodegradable polymers as compatibilizers . Energy Procedia , 2013 . 34 549 - 554 . DOI: 10.1016/j.egypro.2013.06.784 http://doi.org/10.1016/j.egypro.2013.06.784 .

Khaparde, D . Preparation and prediction of physical properties of cellulose acetate and polyamide polymer blend . Carbohydr. Polym. , 2017 . 173 338 - 343 . DOI: 10.1016/j.carbpol.2017.05.052 http://doi.org/10.1016/j.carbpol.2017.05.052 .

Lepcio, P.; Ondreas, F.; Zarybnicka, K.; Zboncak, M.; Caha, O.; Jancar, J . Bulk polymer nanocomposites with preparation protocol governed nanostructure: the origin and properties of aggregates and polymer bound clusters . Soft Matter , 2018 . 14 ( 11 ): 2094 - 2103 . DOI: 10.1039/c8sm00150b http://doi.org/10.1039/c8sm00150b .

Ucankus, G.; Ercan, M.; Uzunoglu, D.; Culha, M., 1 - Methods for preparation of nanocomposites in environmental remediation A2 - Hussain, Chaudhery Mustansar. In New polymer nanocomposites for environmental remediation , Mishra, A. K., Ed. Elsevier, 2018 , pp 1-28

Mittal, V. in Polymer nanotube nanocomposites: Synthesis, properties, and applications . Wiley, 2010

Koo, J. H. in Fundamentals, properties, and applications of polymer nanocomposites . Cambridge University Press, 2016

Thomas, S.; Grohens, Y.; Jyotishkumar, P. in Characterization of polymer blends: Miscibility, morphology and interfaces . Wiley, 2014

Isayev, A. I. in Encyclopedia of polymer blends: volume 1: Fundamentals . John Wiley & amp; Sons, 2010

Bai, L.; He, S.; Fruehwirth, J. W.; Stein, A.; Macosko, C. W.; Cheng, X . Localizing graphene at the interface of cocontinuous polymer blends: Morphology, rheology, and conductivity of cocontinuous conductive polymer composites . J. Rheol. , 2017 . 61 575 - 587 . DOI: 10.1122/1.4982702 http://doi.org/10.1122/1.4982702 .

Landel, R. F.; Nielsen, L. E. in Mechanical properties of polymers and composites , Second Edition. Taylor & amp; Francis, 1993

Chiu, F. C.; Yen, H. Z.; Lee, C. E . Characterization of PP/HDPE blend-based nanocomposites using different maleated polyolefins as compatibilizers . Polym. Test. , 2010 . 29 397 - 406 . DOI: 10.1016/j.polymertesting.2010.01.004 http://doi.org/10.1016/j.polymertesting.2010.01.004 .

Naffakh, M.; Diez-Pascual, A. M.; Marco, C . Polymer blend nanocomposites based on poly(L-lactic acid), polypropylene and WS 2 inorganic nanotubes . RSC Adv. , 2016 . 6 40033 - 40044 . DOI: 10.1039/C6RA05803E http://doi.org/10.1039/C6RA05803E .

Baudouin, A. C.; Devaux, J.; Bailly, C . Localization of carbon nanotubes at the interface in blends of polyamide and ethylene-acrylate copolymer . Polymer , 2010 . 51 1341 - 1354 . DOI: 10.1016/j.polymer.2010.01.050 http://doi.org/10.1016/j.polymer.2010.01.050 .

Sharifzadeh, E.; Salami-Kalajahi, M.; Hosseini, M. S.; Aghjeh, M. K. R . Synthesis of silica Janus nanoparticles by buoyancy effect-induced desymmetrization process and their placement at the PS/PMMA interface . Colloid. Polym. Sci. , 2017 . 295 25 - 36 . DOI: 10.1007/s00396-016-3977-5 http://doi.org/10.1007/s00396-016-3977-5 .

Bryson, K. C.; Löbling, T. I.; Müller, A. H. E.; Russell, T. P.; Hayward, R. C . Using Janus nanoparticles to trap polymer blend morphologies during solvent-evaporation-induced demixing . Macromolecules , 2015 . 48 4220 - 4227 . DOI: 10.1021/acs.macromol.5b00640 http://doi.org/10.1021/acs.macromol.5b00640 .

Paunov, V. N.; Cayre, O. J . Supraparticles and " Janus” particles fabricated by replication of particle monolayers at liquid surfaces using a gel trapping technique . Adv. Mater. , 2004 . 16 788 - 791 . DOI: 10.1002/(ISSN)1521-4095 http://doi.org/10.1002/(ISSN)1521-4095 .

Lv, W.; Lee, K. J.; Li, J.; Park, T.-H.; Hwang, S.; Hart, A. J.; Zhang, F.; Lahann, J . Anisotropic Janus catalysts for spatially controlled chemical reactions . Small , 2012 . 8 3116 - 3122 . DOI: 10.1002/smll.v8.20 http://doi.org/10.1002/smll.v8.20 .

Roh, K. H.; Martin, D. C.; Lahann, J . Biphasic Janus particles with nanoscale anisotropy . Nat. Mater. , 2005 . 4 759 DOI: 10.1038/nmat1486 http://doi.org/10.1038/nmat1486 .

Giermanska-Kahn, J.; Laine, V.; Arditty, S.; Schmitt, V.; Leal-Calderon, F . Particle-stabilized emulsions comprised of solid droplets . Langmuir , 2005 . 21 4316 - 4323 . DOI: 10.1021/la0501177 http://doi.org/10.1021/la0501177 .

Fernandez-Rodriguez, M. A.; Rodriguez-Valverde, M. A.; Cabrerizo-Vilchez, M. A.; Hidalgo-Alvarez, R . Surface activity of Janus particles adsorbed at fluid-fluid interfaces: Theoretical and experimental aspects . Adv. Colloid Interface Sci. , 2016 . 233 240 - 254 . DOI: 10.1016/j.cis.2015.06.002 http://doi.org/10.1016/j.cis.2015.06.002 .

Kango, S.; Kalia, S.; Celli, A.; Njuguna, J.; Habibi, Y.; Kumar, R . Surface modification of inorganic nanoparticles for development of organic–inorganic nanocomposites—A review . Prog. Polym. Sci. , 2013 . 38 1232 - 1261 . DOI: 10.1016/j.progpolymsci.2013.02.003 http://doi.org/10.1016/j.progpolymsci.2013.02.003 .

Mahdavi, M.; Ahmad, M.; Haron, M.; Namvar, F.; Nadi, B.; Rahman, M.; Amin, J . Synthesis, surface modification and characterisation of biocompatible magnetic iron oxide nanoparticles for biomedical applications . Molecules , 2013 . 18 7533 - 7548 . DOI: 10.3390/molecules18077533 http://doi.org/10.3390/molecules18077533 .

Taguet, A.; Cassagnau, P.; Lopez-Cuesta, J. M . Structuration, selective dispersion and compatibilizing effect of (nano)fillers in polymer blends . Prog. Polym. Sci. , 2014 . 39 1526 - 1563 . DOI: 10.1016/j.progpolymsci.2014.04.002 http://doi.org/10.1016/j.progpolymsci.2014.04.002 .

Sharifzadeh, E.; Ghasemi, I.; Karrabi, M.; Azizi, H . A new approach in modeling of mechanical properties of binary phase polymeric blends . Iran Polym. J. , 2014 . 23 525 - 530 . DOI: 10.1007/s13726-014-0247-6 http://doi.org/10.1007/s13726-014-0247-6 .

Sharifzadeh, E.; Ghasemi, I.; Karrabi, M.; Azizi, H . A new approach in modeling of mechanical properties of nanocomposites: Effect of interface region and random orientation . Iran Polym. J. , 2014 . 23 835 - 845 . DOI: 10.1007/s13726-014-0276-1 http://doi.org/10.1007/s13726-014-0276-1 .

Sharifzadeh, E.; Ghasemi, I.; Safajou-Jahankhanemlou, M . Modulus prediction of binary phase polymeric blends using symmetrical approximation systems as a new approach . Iran Polym. J. , 2015 . 24 735 - 746 . DOI: 10.1007/s13726-015-0362-z http://doi.org/10.1007/s13726-015-0362-z .

Zare, Y . Modeling the strength and thickness of the interphase in polymer nanocomposite reinforced with spherical nanoparticles by a coupling methodology . J. Colloid Interface Sci. , 2016 . 465 342 - 346 . DOI: 10.1016/j.jcis.2015.09.025 http://doi.org/10.1016/j.jcis.2015.09.025 .

Zare, Y . Modeling of tensile modulus in polymer/carbon nanotubes (CNT) nanocomposites . Synth. Met. , 2015 . 202 68 - 72 . DOI: 10.1016/j.synthmet.2015.02.002 http://doi.org/10.1016/j.synthmet.2015.02.002 .

Zare, Y.; Rhee, K. Y.; Park, S. J . Modeling of tensile strength in polymer particulate nanocomposites based on material and interphase properties . J. Appl. Polym. Sci. , 2017 . 134 44869 DOI: 10.1002/app.44869 http://doi.org/10.1002/app.44869 .

Bao, W. S.; Meguid, S. A.; Zhu, Z. H.; Meguid, M. J . Modeling electrical conductivities of nanocomposites with aligned carbon nanotubes . Nanotechnology , 2011 . 22 485704 DOI: 10.1088/0957-4484/22/48/485704 http://doi.org/10.1088/0957-4484/22/48/485704 .

Zare, Y . Modeling approach for tensile strength of interphase layers in polymer nanocomposites . J. Colloid Interface Sci. , 2016 . 471 89 - 93 . DOI: 10.1016/j.jcis.2016.03.029 http://doi.org/10.1016/j.jcis.2016.03.029 .

Sharifzadeh, E.; Ghasemi, I.; Qarebagh, A. N . Modeling of blend-based polymer nanocomposites using a knotted approximation of Young’s modulus . Iran Polym. J. , 2015 . 24 1039 - 1047 . DOI: 10.1007/s13726-015-0391-7 http://doi.org/10.1007/s13726-015-0391-7 .

Mortazavi, S.; Ghasemi, I.; Oromiehie, A . Prediction of tensile modulus of nanocomposites based on polymeric blends . Iran Polym. J. , 2013 . 22 437 - 445 . DOI: 10.1007/s13726-013-0143-5 http://doi.org/10.1007/s13726-013-0143-5 .

Dong, B.; Huang, Z.; Chen, H.; Yan, L. T . Chain-stiffness-induced entropy effects mediate interfacial assembly of Janus nanoparticles in block copolymers: From interfacial nanostructures to optical responses . Macromolecules , 2015 . 48 5385 - 5393 . DOI: 10.1021/acs.macromol.5b01290 http://doi.org/10.1021/acs.macromol.5b01290 .

Zhu, G.; Huang, Z.; Xu, Z.; Yan, L. T . Tailoring interfacial nanoparticle organization through entropy . Acc. Chem. Res. , 2018 . 51 900 - 909 . DOI: 10.1021/acs.accounts.8b00001 http://doi.org/10.1021/acs.accounts.8b00001 .

Chen, P.; Yang, Y.; Dong, B.; Huang, Z.; Zhu, G.; Cao, Y.; Yan, L. T . Polymerization-induced interfacial self-assembly of Janus nanoparticles in block copolymers: Reaction-mediated entropy effects, diffusion dynamics, and tailorable micromechanical behaviors . Macromolecules , 2017 . 50 2078 - 2091 . DOI: 10.1021/acs.macromol.7b00012 http://doi.org/10.1021/acs.macromol.7b00012 .

Ji, X. L.; Jing, J. K.; Jiang, W.; Jiang, B. Z . Tensile modulus of polymer nanocomposites . Polym. Eng. Sci. , 2002 . 42 983 - 993 . DOI: 10.1002/(ISSN)1548-2634 http://doi.org/10.1002/(ISSN)1548-2634 .

Wang, J. F.; Carson, J. K.; North, M. F.; Cleland, D. J . A knotted and interconnected skeleton structural model for predicting Young's modulus of binary phase polymer blends . Polym. Eng. Sci. , 2010 . 50 643 - 651 . DOI: 10.1002/pen.21592 http://doi.org/10.1002/pen.21592 .

Kolařík, J . Three-dimensional models for predicting the modulus and yield strength of polymer blends, foams, and particulate composites . Polym. Compos. , 1997 . 18 433 - 441 . DOI: 10.1002/(ISSN)1548-0569 http://doi.org/10.1002/(ISSN)1548-0569 .

Sharifzadeh, E.; Salami-Kalajahi, M.; Hosseini, M. S.; Aghjeh, M. K. R . A temperature-controlled method to produce Janus nanoparticles using high internal interface systems: Experimental and theoretical approaches . Colloid Surface A , 2016 . 506 56 - 62 . DOI: 10.1016/j.colsurfa.2016.06.006 http://doi.org/10.1016/j.colsurfa.2016.06.006 .

Sharifzadeh, E.; Salami-Kalajahi, M.; Salami Hosseini, M.; Razavi Aghjeh, M. K.; Najafi, S.; Jannati, R.; Hatef, Z . Defining the characteristics of spherical Janus particles by investigating the behavior of their corresponding particles at the oil/water interface in a Pickering emulsion . J. Dispersion Sci. Technol. , 2017 . 38 985 - 991 . DOI: 10.1080/01932691.2016.1216861 http://doi.org/10.1080/01932691.2016.1216861 .

Mekhilef, N.; Verhoogt, H . Phase inversion and dual-phase continuity in polymer blends: Theoretical predictions and experimental results . Polymer , 1996 . 37 4069 - 4077 . DOI: 10.1016/0032-3861(96)00254-6 http://doi.org/10.1016/0032-3861(96)00254-6 .

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

On-demand Peelable UV-curable Adhesives with Superior Bonding Strength: Rational Molecular Engineering of Cohesion-adhesion Synergy

Energy Storage Performance of Supercapacitors with Polyelectrolyte Surface Coatings: Effects of Dielectric Contrast

Enhancing Processability of Phenylethynyl-terminated Imide Oligomers and Properties of Cured Polyimides via ―CF3 Incorporation

From Molecular Defect to Macroscopic Performance: Manipulating Dichroism and Mechanics in Iodine-doped Poly(vinyl alcohol) via Ethylene Incorporation

Alternating Poly(ether-alt-ester)s with High Glass Transition Temperature Enabled by Rotationally Constrained Biaryl Units

Related Author

No data

Related Institution

No data

⁰