Understanding the Reinforcement and Dissipation of Natural Rubber Compounds Filled with Hybrid Filler Composed of Carbon Black and Silica

Yi-hu Song; Ling-bin Zeng; Qiang Zheng

doi:10.1007/s10118-017-1987-5

Your Location：

Home >

Browse articles >

Understanding the Reinforcement and Dissipation of Natural Rubber Compounds Filled with Hybrid Filler Composed of Carbon Black and Silica

Papers | Updated：2021-02-18

- Understanding the Reinforcement and Dissipation of Natural Rubber Compounds Filled with Hybrid Filler Composed of Carbon Black and Silica
- Chinese Journal of Polymer Science Vol. 35, Issue 11, Pages: 1436-1446(2017)
- Affiliations：
  
  a.Ministry of Education Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Key Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang Province, Zhejiang University, Hangzhou 310027, China
  b.Shanghai Aerospace System Engineering Institute, Shanghai 201110, China
- Author bio：
  
  Yi-hu Song(宋义虎), E-mail:s_yh0411@zju.edu.cn
- Funds：
- DOI：10.1007/s10118-017-1987-5
  CLC：
- Received：13 April 2017，
  
  Revised：2017-5-16，
  
  Accepted：27 May 2017，
  
  Published：05 November 2017
- Accepted：
Scan QR Code
Yi-hu Song, Ling-bin Zeng, Qiang Zheng. Understanding the Reinforcement and Dissipation of Natural Rubber Compounds Filled with Hybrid Filler Composed of Carbon Black and Silica[J]. Chinese Journal of Polymer Science, 2017, 35(11): 1436-1446.
DOI：

Yi-hu Song, Ling-bin Zeng, Qiang Zheng. Understanding the Reinforcement and Dissipation of Natural Rubber Compounds Filled with Hybrid Filler Composed of Carbon Black and Silica[J]. Chinese Journal of Polymer Science, 2017, 35(11): 1436-1446. DOI： 10.1007/s10118-017-1987-5.

摘要

Abstract

The performance of reinforced rubber compounds depends on the filler composition while the reinforcement and dissipation mechanisms still remain unclear. Herein linear and nonlinear dynamic rheological responses of carbon black/silica hybrid filler filling nature rubber compounds are investigated. The rheological contributions of dynamically retarded bulk phase and filler network are revealed to be crucial at high and low frequencies

respectively

and the bulk phase is shown to be of vital importance for the occurrence of nonlinear Payne effect at mediate frequencies. A framework for simultaneously solving reinforcement and dissipation varying with filler composition and content is suggested

providing a new perspective in understanding the filling effect for manufacturing high-performance rubber materials.

关键词

Keywords

references

Y. Song , M. Du , H. Yang , Q. Zheng . Acta Polymerica Sinica (in Chinese) , 2013 . ( 9 ): 1115 http://en.cnki.com.cn/Article_en/CJFDTOTAL-GFXB201309001.htm http://en.cnki.com.cn/Article_en/CJFDTOTAL-GFXB201309001.htm , .

Y. Song , Q. Zheng . J. Rheol. , 2015 . 59 155 DOI: 10.1122/1.4903312 http://doi.org/10.1122/1.4903312 .

Y. Song , Q. Zheng . Crit. Rev. Solid. State. , 2016 . 41 318 DOI: 10.1080/10408436.2015.1135415 http://doi.org/10.1080/10408436.2015.1135415 .

Y. Song , Q. Zheng . Prog. Mater. Sci. , 2016 . 84 1 DOI: 10.1016/j.pmatsci.2016.09.002 http://doi.org/10.1016/j.pmatsci.2016.09.002 .

L.E. Kosinski , J.M. Caruthers . Rheol. Acta , 1986 . 25 153 DOI: 10.1007/BF01332133 http://doi.org/10.1007/BF01332133 .

Z.Y. Zhu , T. Thompson , S.Q. Wang , E.D. von Meerwall , A. Halasa . Macromolecules , 2005 . 38 8816 DOI: 10.1021/ma050922s http://doi.org/10.1021/ma050922s .

S. Wolff , M.J. Wang , E.H. Tan . Rubber Chem. Technol. , 1993 . 66 163 DOI: 10.5254/1.3538304 http://doi.org/10.5254/1.3538304 .

A.R. Payne . J. Appl. Polym. Sci. , 1964 . 8 2661 DOI: 10.1002/app.1964.070080614 http://doi.org/10.1002/app.1964.070080614 .

A.R. Payne . J. Appl. Polym. Sci. , 1963 . 7 873 DOI: 10.1002/app.1963.070070307 http://doi.org/10.1002/app.1963.070070307 .

A.R. Payne . J. Appl. Polym. Sci. , 1960 . 3 127 DOI: 10.1002/app.1960.070030721 http://doi.org/10.1002/app.1960.070030721 .

A.P. Meera , S. Said , Y. Grohens , S. Thomas . J. Phys. Chem. C , 2009 . 113 ( 42 ): 17997 DOI: 10.1021/jp9020118 http://doi.org/10.1021/jp9020118 .

C.G. Robertson . Rubber Chem. Technol. , 2015 . 88 463 DOI: 10.5254/rct.15.85950 http://doi.org/10.5254/rct.15.85950 .

Y.T. Tsai , J.Y. Chiou , C.Y. Liao , P.Y. Chen , S.H. Tung , J.J. Lin . Compos. Sci. Technol. , 2016 . 132 9 DOI: 10.1016/j.compscitech.2016.06.006 http://doi.org/10.1016/j.compscitech.2016.06.006 .

N. Rattanasom , T. Saowapark , C. Deeprasertkul . Polym. Test. , 2007 . 26 ( 3 ): 369 DOI: 10.1016/j.polymertesting.2006.12.003 http://doi.org/10.1016/j.polymertesting.2006.12.003 .

L. Bokobza . Rubber Chem. Technol. , 2013 . 86 423 DOI: 10.5254/rct.13.86983 http://doi.org/10.5254/rct.13.86983 .

P. Zhang , M. Morris , D. Doshi . Rubber Chem. Technol. , 2016 . 89 79 DOI: 10.5254/rct.16.83805 http://doi.org/10.5254/rct.16.83805 .

E.M. Dannenberg . Rubber Chem. Technol. , 1975 . 48 410 DOI: 10.5254/1.3547460 http://doi.org/10.5254/1.3547460 .

G. Kraus , J. T. Gruver . J. Polym. Sci. Part A2:Polym. Phys. , 1970 . 8 571 DOI: 10.1002/pol.1970.160080408 http://doi.org/10.1002/pol.1970.160080408 .

A. Shabbir , H. Goldansaz , O. Hassager , E. van Ruymbeke , N.J. Alvarez . Macromolecules , 2015 . 48 5988 DOI: 10.1021/acs.macromol.5b00757 http://doi.org/10.1021/acs.macromol.5b00757 .

S.L. Scherzer , E. Pavlova , J.D. Esper , Z. Stary . Compos. Sci. Technol. , 2015 . 119 138 DOI: 10.1016/j.compscitech.2015.10.003 http://doi.org/10.1016/j.compscitech.2015.10.003 .

F. Dalmas , E. Leroy . Macromolecules , 2011 . 44 8093 DOI: 10.1021/ma201707j http://doi.org/10.1021/ma201707j .

Y. Zhang , M. Zuo , T. Liu , Y. Song , Q. Zheng . Compos. Sci. Technol. , 2016 . 123 39 DOI: 10.1016/j.compscitech.2015.11.031 http://doi.org/10.1016/j.compscitech.2015.11.031 .

Y.H. Hyun , S.T. Lim , H.J. Choi , M.S. Jhon . Macromolecules , 2001 . 34 8084 DOI: 10.1021/ma002191w http://doi.org/10.1021/ma002191w .

C.C. Lin , S. Gam , J.S. Meth , N. Clarke , K.I. Winey , R.J. Composto . Macromolecules , 2013 . 46 4502 DOI: 10.1021/ma4000557 http://doi.org/10.1021/ma4000557 .

Y. Song , Y. Tan , Q. Zheng . Polymer , 2017 . 112 35 DOI: 10.1016/j.polymer.2017.01.069 http://doi.org/10.1016/j.polymer.2017.01.069 .

Y. Song , L. Zeng , Q. Zheng . Compos. Sci. Technol. , 2017 . 147 39 DOI: 10.1016/j.compscitech.2017.05.003 http://doi.org/10.1016/j.compscitech.2017.05.003 .

C. Carrot , J.C. Majesté , B. Olalla , R. Fulchiron . Rheol. Acta , 2010 . 49 513 DOI: 10.1007/s00397-010-0432-2 http://doi.org/10.1007/s00397-010-0432-2 .

Q. Chen , S. Gong , J. Moll , D. Zhao , S.K. Kumar , R.H. Colby . ACS Macro Lett. , 2015 . 398 http://pubs.acs.org/doi/pdf/10.1021/acsmacrolett.5b00002 http://pubs.acs.org/doi/pdf/10.1021/acsmacrolett.5b00002 , .

G.Y.H. Choong , D.S.A. de Focatiis , D.G. Hassell . Rheol. Acta , 2013 . 52 801 DOI: 10.1007/s00397-013-0706-6 http://doi.org/10.1007/s00397-013-0706-6 .

J.C. Majesté , C. Carrot , B. Olalla , R. Fulchiron . Macromol. Theory Simul. , 2012 . 21 113 DOI: 10.1002/mats.201100063 http://doi.org/10.1002/mats.201100063 .

Y. Song , J. Sun , Q. Zheng . Acta Polymerica Sinica (in Chinese) , 2009 . ( 8 ): 729 .

Y. Song , Q. Zheng . Polymer , 2010 . 51 3262 DOI: 10.1016/j.polymer.2010.05.018 http://doi.org/10.1016/j.polymer.2010.05.018 .

Y. Song , Q. Zheng . Polymer , 2011 . 52 593 DOI: 10.1016/j.polymer.2010.12.047 http://doi.org/10.1016/j.polymer.2010.12.047 .

Y. Song , Q. Zheng . Polymer , 2011 . 52 6173 DOI: 10.1016/j.polymer.2011.11.010 http://doi.org/10.1016/j.polymer.2011.11.010 .

Y. Song , Q. Zheng . Acta Polymerica Sinica (in Chinese) , 2012 . ( 12 ): 1383 .

Y. Song , Q. Zheng . Polymer Bulletin (in Chinese) , 2013 . 15 ( 9 ): 22 .

Y. Song , Q. Zheng , Q. Cao . J. Rheol. , 2009 . 53 1379 DOI: 10.1122/1.3216923 http://doi.org/10.1122/1.3216923 .

J. Wang , D.F. Wu , X. Li , M. Zhang . Polym. Eng. Sci. , 2013 . 53 2541 DOI: 10.1002/pen.v53.12 http://doi.org/10.1002/pen.v53.12 .

D. Wu , J. Wang , M. Zhang , W. Zhou . Ind. Eng. Chem. Res. , 2012 . 51 6705 DOI: 10.1021/ie2024454 http://doi.org/10.1021/ie2024454 .

W. Yu , J. Wang , W. You . Polymer , 2016 . 98 190 DOI: 10.1016/j.polymer.2016.06.028 http://doi.org/10.1016/j.polymer.2016.06.028 .

Y. Tan , X. Yin , M. Chen , Y. Song , Q. Zheng . J. Rheol. , 2011 . 55 965 DOI: 10.1122/1.3604816 http://doi.org/10.1122/1.3604816 .

L.L. Ban , W.M. Hess , L.A. Papazian . Rubber Chem. Technol. , 1974 . 47 858 DOI: 10.5254/1.3540470 http://doi.org/10.5254/1.3540470 .

G.R. Hamed , S. Hatfield . Rubber Chem. Technol. , 1989 . 62 143 DOI: 10.5254/1.3536231 http://doi.org/10.5254/1.3536231 .

D. Moldovan , R. Fechete , D.E. Demco , E. Culea , B. Blümich , V. Herrmann , M. Heinz . J. Magn. Reson. , 2011 . 208 156 DOI: 10.1016/j.jmr.2010.10.019 http://doi.org/10.1016/j.jmr.2010.10.019 .

X.L. Fang , X. Huang , Z. Lu , L. Chen , S. Chen . Polym. Compos. , 2010 . 31 1628 DOI: 10.1002/pc.v31:9 http://doi.org/10.1002/pc.v31:9 .

A. Mujumdar , A.N. Beris , A.B. Metzner . J. Non-newton. Fluid Mech. , 2002 . 102 157 DOI: 10.1016/S0377-0257(01)00176-8 http://doi.org/10.1016/S0377-0257(01)00176-8 .

M.I. Aranguren , E. Mora , J.V. DeGroot , C.W. Macosko . J. Rheol. , 1992 . 36 1165 DOI: 10.1122/1.550306 http://doi.org/10.1122/1.550306 .

M. Bailly , M. Kontopoulou . J. Rheol. , 2013 . 57 407 DOI: 10.1122/1.4774405 http://doi.org/10.1122/1.4774405 .

J. Vermant , S. Ceccia , M.K. Dolgovskij , P.L. Maffettone , C.W. Macosko . J. Rheol. , 2007 . 51 429 DOI: 10.1122/1.2516399 http://doi.org/10.1122/1.2516399 .

J. M. Piau , M. Dorget , J.F. Palierne . J. Rheol. , 1999 . 43 305 DOI: 10.1122/1.550989 http://doi.org/10.1122/1.550989 .

G. Allegra , G. Raos , M. Vacatello . Prog. Polym. Sci. , 2008 . 33 683 DOI: 10.1016/j.progpolymsci.2008.02.003 http://doi.org/10.1016/j.progpolymsci.2008.02.003 .

J. Sun , Y. Song , Q. Zheng , H. Tan , J. Yu , H. Li . J. Polym. Sci., Part B:Polym. Phys. , 2007 . 45 2594 DOI: 10.1002/(ISSN)1099-0488 http://doi.org/10.1002/(ISSN)1099-0488 .

A. van de Walle , C. Tricot , M. Gerspacher . Kautsch. Gummi Kunstst. , 1996 . 49 172 .

R. Yang , Y. Song , Q. Zheng . Polymer , 2017 . 116 304 DOI: 10.1016/j.polymer.2017.04.003 http://doi.org/10.1016/j.polymer.2017.04.003 .

X. Yin , Y. Tan , Y. Chen , Y. Song , Q. Zheng . Polym. Int. , 2012 . 61 1439 DOI: 10.1002/pi.v61.9 http://doi.org/10.1002/pi.v61.9 .

X. Yin , Y. Tan , Y. Gao , Y. Song , Q. Zheng . Polymer , 2012 . 53 3968 DOI: 10.1016/j.polymer.2012.07.035 http://doi.org/10.1016/j.polymer.2012.07.035 .

X. Yin , Y. Tan , L. Li , Y. Song , Q. Zheng . Acta Polymerica Sinica (in Chinese) , 2012 . ( 11 ): 1335 https://www.researchgate.net/publication/275898931_Melt_rheology_of_core-shell_nanoparticles_filled_polystyrene?ev=auth_pub https://www.researchgate.net/publication/275898931_Melt_rheology_of_core-shell_nanoparticles_filled_polystyrene?ev=auth_pub , .

L. Zhao , H. Yang , Y. Song , Y. Zhou , G. Hu , Q. Zheng . J. Mater. Sci. , 2010 . 46 2495 .

S. Rooj , A. Das , K.W. Stoeckelhuber , D.Y. Wang , V. Galiatsatos , G. Heinrich . Soft Matter , 2013 . 9 3798 DOI: 10.1039/c3sm27519a http://doi.org/10.1039/c3sm27519a .

G. Kraus . Appl. Polym. Symp. , 1984 . 75 https://www.researchgate.net/publication/285109095_MECHANICAL_LOSSES_IN_CARBON-BLACK-FILLED_RUBBERS https://www.researchgate.net/publication/285109095_MECHANICAL_LOSSES_IN_CARBON-BLACK-FILLED_RUBBERS , .

L. Chazeau , J.D. Brown , L.C. Yanyo , S.S. Sternstein . Polym. Compos. , 2000 . 21 202 DOI: 10.1002/(ISSN)1548-0569 http://doi.org/10.1002/(ISSN)1548-0569 .

S.S. Sternstein , A.J. Zhu . Macromolecules , 2002 . 35 7262 DOI: 10.1021/ma020482u http://doi.org/10.1021/ma020482u .

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Static Flocculation in Carbon Black-filled Rubber: From Constrained Filler Motion to Polymer-driven Interfacial Reinforcement

Study of Viscoelastic Properties of White Carbon Black Reinforced Synthetic Polyisoprene

Chemical Investigation of Potassium Methyl Siliconate as Deacidification and Strengthening Agent for Preservation of Aged Papers

Mechanically Reinforced Chitosan/Cellulose Nanocrystals Composites with Good Transparency and Biocompatibility

MORPHOLOGY AND MECHANICAL PROPERTIES OF POLY(ETHYLENE-OCTENE) COPOLYMERS OBTAINED BY DYNAMIC PACKING INJECTION MOLDING

Related Author

Zhao-Yan Sun

Qian-Qian Gu

Ya-Fang Zheng

Hong-Guo Sun

Yuan Yin

Si-Yuan Chen

Jun-Lei Guan

Yu-Ge Wang

Related Institution

State Key Laboratory of Polymer Science and Technology, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences

School of Applied Chemistry and Engineering, University of Science and Technology of China

Center for Frontier Research & Technology, Hangzhou Zhongce Rubber Company

Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry and Environment, Beihang University

Department of Chemistry, Renmin University of China

⁰