

FOLLOWUS
a.Institute of Materials, China Academy of Engineering Physics, Jiangyou 621908, China
b.Department of Materials, Southwest University of Science and Technology, Mianyang 621010, China
c.Institut des Sciences Moleculaires, University Bordeaux, 351 Cours de la Liberation, Talence Cedex 33405, France
Mao-bing Shuai (帅茂兵), E-mail: shuaimaobing@caep.cn
Received:15 November 2016,
Revised:2016-12-8,
Accepted:15 December 2016,
Published:05 June 2017
Scan QR Code
Ya-kun Guo, Han Li, Peng-xiang Zhao, et al. Thermo-reversible MWCNTs/Epoxy Polymer for Use in Self-healing and Recyclable Epoxy Adhesive[J]. Chinese Journal of Polymer Science, 2017, 35(6): 728-738.
Ya-kun Guo, Han Li, Peng-xiang Zhao, et al. Thermo-reversible MWCNTs/Epoxy Polymer for Use in Self-healing and Recyclable Epoxy Adhesive[J]. Chinese Journal of Polymer Science, 2017, 35(6): 728-738. DOI: 10.1007/s10118-017-1920-y.
A self-healing and recyclable carbon tube/epoxy adhesive was prepared by epoxy monomer with Diels-Alder (DA) bonds
diethylenetriamine and polyethyleneimine modified multi-wall carbon nanotubes (MWCNTs). The self-healing and recyclable ability was attained by thermally reversible Diels-Alder reaction between furan and maleimide in the epoxy monomer. By controlling the molar ratio of furfuryl glycidyl ether and 4
4'-methylenebis(
N
-phenylmaleimide)
the glass transition temperature and mechanical properties of MWCNTs/epoxy adhesives were varied. The self-healing properties of MWCNTs/epoxy polymers were evaluated by lap shear experiment and the results showed that the MWCNTs/epoxy adhesives exhibited enhanced mechanical properties and excellent self-healing ability under heat stimulus. The healing efficiency was related to the molecule mobility and the conversion of DA reaction between furan and maleimide. The MWCNTs/epoxy adhesives also displayed excellent recyclable ability by transforming into soluble polymer under heating. These materials offer a wide range of possibilities to produce materials with healing and recyclable ability and have the potential to bring great benefits to our daily lives by enhancing the safety
performance
and lifetime of products.
Goodman, S. W. , "Handbook of thermoset plastics", access online via Elsevier, 1999, p. 23
B.J. Blaiszik , S.L.B. Kramer , S.C. Olugebefola , J.S. Moore , N.R. Sottos , S.R. White . . Annu. Rev. Mater. Res. , 2010 . 40 179 DOI: 10.1146/annurev-matsci-070909-104532 http://doi.org/10.1146/annurev-matsci-070909-104532 .
D.Y. Wu , S. Meure , D. Solomon . . Prog. Polym. Sci. , 2008 . 33 479 DOI: 10.1016/j.progpolymsci.2008.02.001 http://doi.org/10.1016/j.progpolymsci.2008.02.001 .
C.E. Diesendruck , N.R. Sottos , J.S. Moore , S.R. White . . Angew. Chem. Int. Ed. , 2015 . 54 2 DOI: 10.1002/anie.201410932 http://doi.org/10.1002/anie.201410932 .
A. Stoddart . . Nat. Rev. Mater. , 2016 . 1 16004 DOI: 10.1038/natrevmats.2016.4 http://doi.org/10.1038/natrevmats.2016.4 .
L. Huang , N.B. Yi , Y.P. Wu , Y. Zhang , Q. Zhang , Y. Huang , Y.F. Ma , Y.S. Chen . . Adv. Mater. , 2013 . 25 2224 DOI: 10.1002/adma.201204768 http://doi.org/10.1002/adma.201204768 .
S.R. White , N.R. Sottos , P.H. Geubelle , J.S. Moore , M.R. Kessler , S.R. Sriram , E.N. Brown , S. Viswanathan . . Nature , 2001 . 409 794 DOI: 10.1038/35057232 http://doi.org/10.1038/35057232 .
N. Roy , B. Bruchmann , J.M. Lehn . . Chem. Soc. Rev. , 2015 . 44 ( 11 ): 3786 DOI: 10.1039/C5CS00194C http://doi.org/10.1039/C5CS00194C .
M.D. Hager , P. Greil , C. Leyens , S.V.D. Zwaag , U.S. Schubert . . Adv. Mater. , 2010 . 22 5424 DOI: 10.1002/adma.201003036 http://doi.org/10.1002/adma.201003036 .
Y. Yang , M.W. Urban . . Chem. Soc. Rev. , 2013 . 42 7446 DOI: 10.1039/c3cs60109a http://doi.org/10.1039/c3cs60109a .
C.J. Kloxin , C.N. Bowman . . Chem. Soc. Rev. , 2013 . 42 7161 DOI: 10.1039/C3CS60046G http://doi.org/10.1039/C3CS60046G .
P.A. Pratama , M. Sharifi , A.M. Peterson , G.R. Palmese . . ACS Appl. Mater. Interfaces , 2013 . 5 12425 DOI: 10.1021/am403459e http://doi.org/10.1021/am403459e .
C. Zeng , H. Seino , J. Ren , K. Hatanaka , N. Yoshie . . Macromolecules , 2013 . 46 1794 DOI: 10.1021/ma3023603 http://doi.org/10.1021/ma3023603 .
G. Rivero , L.T.T. Nguyen , X.K.D. Hillewaere , P.F.E. Du . . Macromolecules , 2014 . 47 2010 DOI: 10.1021/ma402471c http://doi.org/10.1021/ma402471c .
Q. Tian , Y.C. Yuan , M.Z. Rong , M.Q. Zhang . . J. Mater. Chem. , 2009 . 19 1289 DOI: 10.1039/b811938d http://doi.org/10.1039/b811938d .
Y.S. Heo , H.A. Sodano . . Adv. Funct. Mater. , 2014 . 24 5261 DOI: 10.1002/adfm.v24.33 http://doi.org/10.1002/adfm.v24.33 .
Y.L. Liu , T.W. Chuo . . Polym. Chem. , 2013 . 4 2194 DOI: 10.1039/c2py20957h http://doi.org/10.1039/c2py20957h .
M.J. Barthel , T. Rudolph , A. Teichler , R.M. Paulus , J. Vitz , S. Hoeppener , M.D. Hager , F.H. Schacher , U.S. Schubert . . Adv. Funct. Mater. , 2013 . 23 4921 DOI: 10.1002/adfm.v23.39 http://doi.org/10.1002/adfm.v23.39 .
N. Bai , K. Saito , G.P. Simon . . Polym. Chem. , 2013 . 4 724 DOI: 10.1039/C2PY20611K http://doi.org/10.1039/C2PY20611K .
X. Kuang , G.M. Liu , X. Dong , D.J. Wang . . Macromol. Mater. Eng. , 2016 . 301 535 DOI: 10.1002/mame.v301.5 http://doi.org/10.1002/mame.v301.5 .
Y.Q. Min , S.Y. Huang , Y.X. Wang , Z.J. Zhang , B.Y. Du , X.H. Zhang , Z.Q. Fan . . Macromolecules , 2015 . 48 316 DOI: 10.1021/ma501934p http://doi.org/10.1021/ma501934p .
M.T. Byrne , Y.K. Gun'ko . . Adv. Mater. , 2010 . 22 ( 15 ): 1672 DOI: 10.1002/adma.v22:15 http://doi.org/10.1002/adma.v22:15 .
A.M. Schwenke , S. Hoeppener , S. Ulrich , U.S. Schubert . . Adv. Mater. , 2015 . 27 ( 28 ): 4113 DOI: 10.1002/adma.v27.28 http://doi.org/10.1002/adma.v27.28 .
X. Kuang , G.M. Liu , X. Dong , X.G. Liu , J.J. Xu , D.J. Wang . . J. Polym. Sci.Part A: Polym. Chem. , 2015 . 53 2094 DOI: 10.1002/pola.v53.18 http://doi.org/10.1002/pola.v53.18 .
J.H. Li , G.P. Zhang , L.B. Deng , S.F. Zhao , Y.J. Gao , K. Jiang , R. Sun , C.P. Wong . . J. Mater. Chem. A , 2014 . 2 20642 DOI: 10.1039/C4TA04941A http://doi.org/10.1039/C4TA04941A .
X.Z. Tang , B. Yu , R.V. Hansen , X.L. Chen , X. Hu , J.L. Yang . . Adv. Mater. Interfaces , 2015 . 2 1500122 DOI: 10.1002/admi.201500122 http://doi.org/10.1002/admi.201500122 .
Q.Y. Peng , X.D. He , Y.B. Li , C. Wang , R.G. Wang , P.G. Hu , Y.D. Yan , T. Sritharan . . J. Mater. Chem. , 2012 . 22 ( 13 ): 5928 DOI: 10.1039/c2jm16723a http://doi.org/10.1039/c2jm16723a .
A. Montazeri , J. Javadpour , A. Khavandi , A. Tcharkhtchi , A. Mohajeri . . Mater. Design , 2010 . 31 4202 DOI: 10.1016/j.matdes.2010.04.018 http://doi.org/10.1016/j.matdes.2010.04.018 .
K. Yang , M. Gu , Y. Guo , X. Pan , G. Mu . . Carbon , 2009 . 47 1723 DOI: 10.1016/j.carbon.2009.02.029 http://doi.org/10.1016/j.carbon.2009.02.029 .
U. Lafont , H. van Zeijl , Zwaag S. van der . . ACS Appl. Mater. Interfaces , 2012 . 4 ( 11 ): 6280 DOI: 10.1021/am301879z http://doi.org/10.1021/am301879z .
0
Views
4
Downloads
0
CSCD
Publicity Resources
Related Articles
Related Author
Related Institution
京公网安备11010802046900号