Efficient P3HT: PC<sub>61</sub>BM Solar Cells Employing 1, 2, 4-Trichlorobenzene as the Processing Additives

Wei-chao Chen; Man-jun Xiao; Chun-peng Yang; Lin-rui Duan; Ren-qiang Yang

doi:10.1007/s10118-017-1892-y

Your Location：

Home >

Browse articles >

Efficient P3HT: PC₆₁BM Solar Cells Employing 1, 2, 4-Trichlorobenzene as the Processing Additives

Papers | Updated：2021-02-18

- Efficient P3HT: PC₆₁BM Solar Cells Employing 1, 2, 4-Trichlorobenzene as the Processing Additives
- Chinese Journal of Polymer Science Vol. 35, Issue 2, Pages: 302-308(2017)
- Affiliations：
  
  a.Chinese Academy of Sciences Key Laboratory of Bio-based Materials, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao 266101, China
  b.College of Textiles & Clothing, Qingdao University, Qingdao 266071, China
- Author bio：
  
  Chun-peng Yang (杨春鹏), E-mail:yangcp@qibebt.ac.cn
- Funds：
- DOI：10.1007/s10118-017-1892-y
  CLC：
- Received：14 October 2016，
  
  Revised：2016-11-8，
  
  Accepted：10 November 2016，
  
  Published：2017-02
- Accepted：
Scan QR Code
Wei-chao Chen, Man-jun Xiao, Chun-peng Yang, et al. Efficient P3HT: PC₆₁BM Solar Cells Employing 1, 2, 4-Trichlorobenzene as the Processing Additives[J]. Chinese Journal of Polymer Science, 2017, 35(2): 302-308. DOI: 10.1007/s10118-017-1892-y.
DOI：

Wei-chao Chen, Man-jun Xiao, Chun-peng Yang, et al. Efficient P3HT: PC₆₁BM Solar Cells Employing 1, 2, 4-Trichlorobenzene as the Processing Additives[J]. Chinese Journal of Polymer Science, 2017, 35(2): 302-308. DOI: 10.1007/s10118-017-1892-y. DOI：

摘要

Abstract

The efficiency of the poly (3-hexylthiophene) (P3HT) and[6

6]-phenyl C

-butyric acid methyl ester (PC

BM) based organic solar cells was enhanced by using 1

4-trichlorobenzene (TCB) as a processing additive to control the blend morphology. The addition of TCB improved the arrangement of P3HT which resulted in good phase separated blend films. Correspondingly

the optimized solar cells showed a power conversion efficiency (PCE) of 4.17% with a fill factor (FF) of 0.69

which were higher than those of common thermal annealing devices (PCE 3.84%

FF 0.67). The efficiency was further improved to 4.74% by thermal annealing at 150¦ for 10 min with a higher FF of 0.74.

关键词

Keywords

references

G. Yu , J. Gao , J.C. Hummelen , F. Wudl , A.J. Heeger . Science , 1995 . 270 ( 5243 ): 1789 DOI: 10.1126/science.270.5243.1789 http://doi.org/10.1126/science.270.5243.1789 .

S. Gunes , H. Neugebauer , N.S. Sariciftci . Chem. Rev. , 2007 . 107 ( 4 ): 1324 DOI: 10.1021/cr050149z http://doi.org/10.1021/cr050149z .

B.C. Thompson , J.M.J. Frechet . Angew. Chem. Int. Ed. , 2008 . 47 ( 1 ): 58 DOI: 10.1002/(ISSN)1521-3773 http://doi.org/10.1002/(ISSN)1521-3773 .

J.W. Chen , Y. Cao . Accounts Chem. Res. , 2009 . 42 ( 11 ): 1709 DOI: 10.1021/ar900061z http://doi.org/10.1021/ar900061z .

Z.B. Henson , K. Mullen , G.C. Bazan . Nat. Chem. , 2012 . 4 ( 9 ): 699 DOI: 10.1038/nchem.1422 http://doi.org/10.1038/nchem.1422 .

G. Li , R. Zhu , Y. Yang . Nat. Photon. , 2012 . 6 ( 3 ): 153 DOI: 10.1038/nphoton.2012.11 http://doi.org/10.1038/nphoton.2012.11 .

Y.F. Li . Accounts Chem. Res. , 2012 . 45 ( 5 ): 723 DOI: 10.1021/ar2002446 http://doi.org/10.1021/ar2002446 .

T. Ameri , N. Li , C.J. Brabec . Energy Environ. Sci. , 2013 . 6 ( 8 ): 2390 DOI: 10.1039/c3ee40388b http://doi.org/10.1039/c3ee40388b .

Z.C. He , C.M. Zhong , S.J. Su , M. Xu , H.B. Wu , Y. Cao . Nat. Photon. , 2012 . 6 ( 9 ): 591 .

J.B. You , L.T. Dou , K. Yoshimura , T. Kato , K. Ohya , T. Moriarty , K. Emery , C.C. Chen , J. Gao , G. Li , Y. Yang . Nat. Commun. , 2013 . 4 1446 DOI: 10.1038/ncomms2411 http://doi.org/10.1038/ncomms2411 .

C.C. Chen , W.H. Chang , K. Yoshimura , K. Ohya , J. You , J. Gao , Z. Hong , Y. Yang . Adv. Mater. , 2014 . 26 ( 32 ): 5670 DOI: 10.1002/adma.201402072 http://doi.org/10.1002/adma.201402072 .

M. Mayukh , I.H. Jung , F. He , L.P.J. Yu . Polym. Sci., Part B:Polym. Phys. , 2012 . 50 ( 15 ): 1057 DOI: 10.1002/polb.23102 http://doi.org/10.1002/polb.23102 .

W. Chen , M.P. Nikiforov , S.B. Darling . Energy Environ. Sci. , 2012 . 5 ( 8 ): 8045 DOI: 10.1039/c2ee22056c http://doi.org/10.1039/c2ee22056c .

L.M. Chen , Z.R. Hong , G. Li , Y. Yang . Adv. Mater. , 2009 . 21 ( 14-15 ): 1434 DOI: 10.1002/adma.v21:14/15 http://doi.org/10.1002/adma.v21:14/15 .

F. Padinger , R.S. Rittberger , N.S. Sariciftci . Adv. Func. Mater. , 2003 . 13 ( 1 ): 85 DOI: 10.1002/adfm.200390011 http://doi.org/10.1002/adfm.200390011 .

W.L. Ma , C.Y. Yang , X. Gong , K. Lee , A.J. Heeger . Adv. Funct. Mater. , 2005 . 15 ( 10 ): 1617 DOI: 10.1002/(ISSN)1616-3028 http://doi.org/10.1002/(ISSN)1616-3028 .

G. Li , V. Shrotriya , J.S. Huang , Y. Yao , T. Moriarty , K. Emery , Y. Yang . Nat. Mater. , 2005 . 4 ( 11 ): 864 DOI: 10.1038/nmat1500 http://doi.org/10.1038/nmat1500 .

S.H. Jin , B.V.K. Naidu , H.S. Jeon , S.M. Park , J.S. Park , S.C. Kim , J.W. Lee , Y.S. Gal . Sol. Energy Mater. Sol. Cells. , 2007 . 91 ( 13 ): 1187 DOI: 10.1016/j.solmat.2007.04.001 http://doi.org/10.1016/j.solmat.2007.04.001 .

Y. Zhao , Z.Y. Xie , Y. Qu , Y.H. Geng , L.X. Wang . Appl. Phys. Lett. , 2007 . 90 ( 4 ): 043504 DOI: 10.1063/1.2434173 http://doi.org/10.1063/1.2434173 .

J. Peet , J.Y. Kim , N.E. Coates , W.L. Ma , D. Moses , A.J. Heeger , G.C. Bazan . Nat. Mater. , 2007 . 6 ( 7 ): 497 DOI: 10.1038/nmat1928 http://doi.org/10.1038/nmat1928 .

L.J. Huo , S.Q. Zhang , X. Guo , F. Xu , Y.F. Li , J.H. Hou . Angew. Chem. Int. Ed. , 2011 . 50 ( 41 ): 9697 DOI: 10.1002/anie.201103313 http://doi.org/10.1002/anie.201103313 .

S. Chen , C.E. Small , C.M. Amb , J. Subbiah , T.H. Lai , S.W. Tsang , J.R. Manders , J.R. Reynolds , F. So . Adv. Energy Mater. , 2012 . 2 ( 11 ): 1333 DOI: 10.1002/aenm.v2.11 http://doi.org/10.1002/aenm.v2.11 .

C. Cabanetos , A. El Labban , J.A. Bartelt , J.D. Douglas , W.R. Mateker , J.M.J. Frechet , M.D. McGehee , P.M. Beaujuge . J. Am. Chem. Soc. , 2013 . 135 ( 12 ): 4656 DOI: 10.1021/ja400365b http://doi.org/10.1021/ja400365b .

T.Y. Chu , J.P. Lu , S. Beaupre , Y.G. Zhang , J.R. Pouliot , S. Wakim , J.Y. Zhou , M. Leclerc , Z. Li , J.F. Ding , Y. Tao . J. Am. Chem. Soc. , 2011 . 133 ( 12 ): 4250 DOI: 10.1021/ja200314m http://doi.org/10.1021/ja200314m .

H.C. Liao , C.C. Ho , C.Y. Chang , M.H. Jao , S.B. Darling , W.F. Su . Mater. Today , 2013 . 16 ( 9 ): 326 DOI: 10.1016/j.mattod.2013.08.013 http://doi.org/10.1016/j.mattod.2013.08.013 .

S.B. Darling , F.Q. You . RSC Adv. , 2013 . 3 ( 39 ): 17633 DOI: 10.1039/c3ra42989j http://doi.org/10.1039/c3ra42989j .

F.C. Chen , H.C. Tseng , C.J. Ko . Appl. Phys. Lett. , 2008 . 92 ( 10 ): 103316 DOI: 10.1063/1.2898153 http://doi.org/10.1063/1.2898153 .

A.J. Moule , K. Meerholz . Adv. Mater. , 2008 . 20 ( 2 ): 240 DOI: 10.1002/(ISSN)1521-4095 http://doi.org/10.1002/(ISSN)1521-4095 .

Y. Yao , J.H. Hou , Z. Xu , G. Li , Y. Yang . Adv. Funct. Mater. , 2008 . 18 ( 12 ): 1783 DOI: 10.1002/adfm.200701459 http://doi.org/10.1002/adfm.200701459 .

T. Salim , L.H. Wong , B. Brauer , R. Kukreja , Y.L. Foo , Z.N. Bao , Y.M. Lam . J. Mater. Chem. , 2011 . 21 ( 1 ): 242 DOI: 10.1039/C0JM01976C http://doi.org/10.1039/C0JM01976C .

S.H. Eom , H. Park , S.H. Mujawar , S.C. Yoon , S.S. Kim , S.I. Na , S.J. Kang , D. Khim , D.Y. Kim , S.H. Lee . Org. Electron. , 2010 . 11 ( 9 ): 1516 DOI: 10.1016/j.orgel.2010.06.007 http://doi.org/10.1016/j.orgel.2010.06.007 .

C.D. Park , T.A. Fleetham , J. Li , B.D. Vogt . Org. Electron. , 2011 . 12 ( 9 ): 1465 DOI: 10.1016/j.orgel.2011.05.020 http://doi.org/10.1016/j.orgel.2011.05.020 .

G. Li , Y. Yao , H. Yang , V. Shrotriya , G. Yang , Y. Yang . Adv. Funct. Mater. , 2007 . 17 ( 10 ): 1636 DOI: 10.1002/(ISSN)1616-3028 http://doi.org/10.1002/(ISSN)1616-3028 .

W.C. Chen , L.Z. Huang , X.L. Qiao , J.B. Yang , B. Yu , D.H. Yan . Org. Electron. , 2012 . 13 ( 6 ): 1086 DOI: 10.1016/j.orgel.2012.03.002 http://doi.org/10.1016/j.orgel.2012.03.002 .

V.D. Mihailetchi , J. Wildeman , P.W.M. Blom . Phys. Rev. Lett. , 2005 . 94 ( 12 ): 126602 DOI: 10.1103/PhysRevLett.94.126602 http://doi.org/10.1103/PhysRevLett.94.126602 .

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Side-chains Engineering of Conjugated Polymers toward Additive-free Non-fullerene Organic Solar Cells

Regulating Intermolecular Interactions through Phenyl-alkyl Side-chain Engineering for High-efficiency Organic Solar Cells

Random Terpolymer Based on Simple Siloxane-functionalized Thiophene Unit Enabling High-performance Non-fullerene Organic Solar Cells

The Role of Processing Solvent on Morphology Optimization for Slot-Die Printed Organic Photovoltaics

Enhancing Processability of Phenylethynyl-terminated Imide Oligomers and Properties of Cured Polyimides via ―CF3 Incorporation

Related Author

Feng Liu

Dan Wang

Jun-Yu Li

Cheng-Yi Xiao

Yong-Gang Wu

Wei-Wei Li

Guang-Sheng Fu

Yang Yi

Related Institution

College of Physics Science & Technology, Hebei University

Beijing Advanced Innovation Center for Soft Matter Science and Engineering & State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology

State Key Laboratory of Advanced Fiber Materials, College of Materials Science and Engineering, Donghua University

National Synchrotron Radiation Laboratory, University of Science and Technology of China

National Engineering Research Center for Carbohydrate Synthesis/Key Laboratory of Fluorine and Silicon for Energy Materials and Chemistry of Ministry ofEducation, College of Chemistry and Chemical Engineering, Jiangxi Normal University

⁰

Efficient P3HT: PC61BM Solar Cells Employing 1, 2, 4-Trichlorobenzene as the Processing Additives

DOI：10.1007/s10118-017-1892-y

摘要

Abstract

关键词

Keywords

references

Efficient P3HT: PC₆₁BM Solar Cells Employing 1, 2, 4-Trichlorobenzene as the Processing Additives