Rheological Study on the Cure Kinetics of Two-component Addition Cured Silicone Rubber

Guan Dong-bo; Cai Zhong-yi; Liu Xin-chun; Lou Bo; Dou Yan-li; Xu Dong-hua; Yao Wei-guo

doi:10.1007/s10118-016-1847-8

Your Location：

Home >

Browse articles >

Rheological Study on the Cure Kinetics of Two-component Addition Cured Silicone Rubber

PAPERS | Updated：2021-05-12

- Rheological Study on the Cure Kinetics of Two-component Addition Cured Silicone Rubber
- Chinese Journal of Polymer Science Vol. 34, Issue 10, Pages: 1290-1300(2016)
- Affiliations：
  
  a. Key Laboratory of Automobile Materials, Ministry of Education, College of Materials Science and Engineering, Jilin University, Changchun 130025, China
  b. Jilin University Roll Forging Technology Research Institute, Changchun 130025, China
  c. State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China
  d.Zhejiang Zhulishen Medical Co. LTD, Zhuji 311814, China
- Author bio：
  
  Dong-hua Xu (许东华), E-mail: dhxu@ciac.ac.cn
  Wei-guo Yao (姚卫国), E-mail: wgyao@jlu.edu.cn
- Funds：
- DOI：10.1007/s10118-016-1847-8
  CLC：
- Received：07 April 2016，
  
  Revised：2016-4-27，
  
  Accepted：08 May 2016，
  
  Published：25 February 2016
- Accepted：
Scan QR Code
Guan Dong-bo, Cai Zhong-yi, Liu Xin-chun, et al. Rheological Study on the Cure Kinetics of Two-component Addition Cured Silicone Rubber[J]. Chinese Journal of Polymer Science, 2016, 34(10): 1290-1300.
DOI：

Guan Dong-bo, Cai Zhong-yi, Liu Xin-chun, et al. Rheological Study on the Cure Kinetics of Two-component Addition Cured Silicone Rubber[J]. Chinese Journal of Polymer Science, 2016, 34(10): 1290-1300. DOI： 10.1007/s10118-016-1847-8.

摘要

Abstract

The cure kinetics for two-component silicone rubber formed by addition reaction was studied by the rheological method. The influence of reaction temperature (

) on the cure kinetics was explored in detail. It was observed that the data of gel time (

gel

i.e.

the time when the reaction reaches the gel point) or

a specific reaction time (

) (defined as the reaction time before which time the influence of confinement of network on the diffusion of reaction components can be neglected) versus

obey certain functional relationship

which was well explained by the cure kinetics model of thermoset network. The cure kinetics for the two-component silicone rubber can be well fitted by the Kamal-Sourour(autocatalyst) reaction model rather than Kissinger model. When the reaction time was before or equal to

the reaction order obtained by the Kamal-Sourour reaction model was 2

which was consistent with the reaction order inferred from the two components chemical reaction when the diffusion of reaction components was not influenced by the formed cross-linked polymer network. When the reaction time was larger than

such as to the end of reaction (

)

the influence of confinement of network on the diffusion of reaction components cannot be neglected

and the reaction order obtained by the Kamal-Sourour reaction model was larger than 2. It was concluded that the confinement effect of network had a greater influence on the cure kinetics of the silicone rubber. The reaction rate constants (

) under different temperatures were also determined by Kamal-Sourour reaction model. The activation energy (

) for the two-component silicone rubber was also calculated from the results of ln

gel

and ln

versus 1/

respectively. The three values of

were close

which indicated that above analyses were self-consistent.

关键词

Keywords

references

A. Saxena, , D. Dasgupta, , S. Bhat, , S. Tiwari, . Samantara, L, Wrobel, D. . J. Appl. Polym. Sci. , 2014 . 131 40125 .

Madsen, F.B., Daugaard, A.E., Fleury, C., Hvilsted, S. and Skov, A.L., RSC Adv., 2014, 4: 6939

Stricher, A.M., Rinaldi, R.G., Barrès, C., Ganachaud, F. and Chazeau, L., RSC Adv., 2015, 5: 53713

Cai, L.H., Kodger, T.E., Guerra, R.E., Pegoraro, A.F., Rubinstein, M. and Weitz, D., Adv. Mater., 2015, 27: 5132

L.M. Lopez, , A.B. Cosgrove, . Hernandez-Ortiz, J.P, Osswald, T.A. . Polym. Eng. Sci. , 2007 . 47 675 DOI: 10.1002/(ISSN)1548-2634 http://doi.org/10.1002/(ISSN)1548-2634 .

Hong, I.K. and Lee, S., J. Ind. Eng. Chem., 2013, 19: 42

H.H. Zhang, , D.H. Xu, , D.B. Guan, . Yao, W.G, Shi, T.F. . Chem. J. Chinese U. , 2015 . 36 788 .

Berlin, A.A. and Oshmyan, V.G., Polym. Sci. U. S. S. R., 1976, 18: 2612

M.R. Kalaee, . Famili, M.H.N, Mahdavi, H. . Polym. Plast. Technol. Eng. , 2009 . 48 ( 627 ): .

Domínguez, J.C., Alonso, M.V., Oliet, M., Rojo, E. and Rodríguez, F., Thermochim. Acta, 2010, 498: 39

K. Nishinari, . . Prog. Colloid Polym. Sci. , 2009 . 136 87 .

L. Núñez, , J. Taboada, , F Fraga, , M.R. Núñez, . . J. Appl. Polym. Sci. , 1997 . 66 1377 DOI: 10.1002/(ISSN)1097-4628 http://doi.org/10.1002/(ISSN)1097-4628 .

Rubinstein, M. and Colby, R.H., “Polymer physics”, Oxford University Press, New York, 2003

Mani, S., Cassagnau, P., Bousmina, M. and Chaumont, P., Macromolecules, 2009, 42: 8460

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Swelling, Interfacial Behavior, and Rheology of Soft Core-Shell Microgels Introducing Acid Isomer for pH-Temperature Dual-responsiveness

Droplet Bridging Effect in Polymer/Polymer/Filler Ternary Composites

Preparation and Rheological Characterization of Long Chain Branching Polyglycolide

Preparation and Chiral Recognition Ability of Crystalline Cellulose Phenylcarbamate

A Paradigm for BF3 Co-initiated Cationic Polymerization with Low Dispersity: Introducing Acetonitrile and Lowering the Reaction Temperature

Related Author

Li Zhang

Xin-Rui Li

Xia-Hui Xiao

Li-Dan Zhou

Yu-Wei Zhu

Jia-Yu Chen

Hang Jiang

Jie Han

Related Institution

School of Science and Technology, Hong Kong Metropolitan University, Homantin, Kowloon

Department of Chemistry, The Chinese University of Hong Kong, Shatin, N..

The Key Laboratory of Synthetic and Biological Colloids, Ministry of Education & School of Chemical and Material Engineering, Jiangnan University

DPI, P.O. Box 902

National Certified Enterprise Technology Center, Kingfa Science and Technology Co., Ltd.

⁰