High Strength Cellulose Composite Films Reinforced with Clay for Applications as Antibacterial Materials

Xu Ding-feng; Cai Jie; Zhang Li-na

doi:10.1007/s10118-016-1840-2

Your Location：

Home >

Browse articles >

High Strength Cellulose Composite Films Reinforced with Clay for Applications as Antibacterial Materials

PAPERS | Updated：2021-05-12

- High Strength Cellulose Composite Films Reinforced with Clay for Applications as Antibacterial Materials
- Chinese Journal of Polymer Science Vol. 34, Issue 10, Pages: 1281-1289(2016)
- Affiliations：
  
  College of Chemistry & Molecule Sciences, Wuhan University, Wuhan 430072, China
- Author bio：
  
  Jie Cai (蔡杰), E-mail: caijie@whu.edu.cn
  Li-na Zhang (张俐娜), E-mail: zhangln@whu.edu.cn
- Funds：
- DOI：10.1007/s10118-016-1840-2
  CLC：
- Received：11 April 2016，
  
  Revised：2016-6-18，
  
  Accepted：06 July 2016，
  
  Published：25 February 2016
- Accepted：
Scan QR Code
Xu Ding-feng, Cai Jie, Zhang Li-na. High Strength Cellulose Composite Films Reinforced with Clay for Applications as Antibacterial Materials[J]. Chinese Journal of Polymer Science, 2016, 34(10): 1281-1289.
DOI：

Xu Ding-feng, Cai Jie, Zhang Li-na. High Strength Cellulose Composite Films Reinforced with Clay for Applications as Antibacterial Materials[J]. Chinese Journal of Polymer Science, 2016, 34(10): 1281-1289. DOI： 10.1007/s10118-016-1840-2.

摘要

Abstract

High strength cellulose composite films with antibacterial activities were prepared by dispersing montmorillonites (MMT) into cellulose solution in LiOH/urea aqueous solvent followed by regeneration in ethanol coagulation bath

and then by soaking in 5 wt% hexadecylpyridine bromide ethanol solutions to induce the antibacterial action. The cellulose/MMT composite films were characterized by field emission scanning electron microscopy

transmission electron microscopy

thermogravimetric analysis

FTIR

UV-spectra

wide angle X-ray diffraction and mechanical test. The results revealed that MMT was dispersed well in the cellulose matrix to form layer structure with a thickness of approximately 3 nm. The mechanical properties of the cellulose/MMT composite films were significantly improved to achieve 132 MP for tensile strength as a result of the MMT delamination. The hexadecylpyridine bromide was fixed well in the cellulose/MMT matrix through cation exchange

leading to the excellent antibacterial activities against

Staphylococcus aureus

and

Escherichia coli

which is important in their practical applications.

关键词

Keywords

references

T. Wu, , A.G. Xie, . . Tan, S.Z, Cai, X.Colloids Surf. B Biointerfaces , 2011 . 86 ( 1 ): 232 DOI: 10.1016/j.colsurfb.2011.04.009 http://doi.org/10.1016/j.colsurfb.2011.04.009 .

Xie, A.G., Cai, X., Lin, M.S. and Tan, S.Z., Mat. Sci. Eng. B-Solid, 2011, 176(15): 1222

X. Cai, , M.S. Lin, , S.Z. Tan, . . Mai, W.J, Zhang, X.Carbon , 2012 . 50 ( 10 ): 3407 .

Wang, M.Z., Wang, T., Yuan, K. and Du, J., Chinese J. Polym. Sci., 2016, 34(1): 44

J. Cai, , L. Zhang, , J. Zhou. , H. Qi, , H. Chen, . . Kondo, T, Chen, X.Adv. Mater. , 2007 . 19 ( 6 ): 821 .

Jia, B., Mei, Y., Cheng, L., Zhou, J. and Zhang, L., ACS Appl. Mater. Interfaces, 2012, 4(6):2897

L. Fu, . . Zhang, J, Yang, G.Carbohyd. Polym. , 2013 . 92 ( 2 ): 1432 DOI: 10.1016/j.carbpol.2012.10.071 http://doi.org/10.1016/j.carbpol.2012.10.071 .

Ul-Islam, M., Khan, T., Khattak, W.A. and Park, J.K., Cellulose, 2013, 20(2): 589

R. Li, , M. He, . . Li, T, Zhang, L.Carbohyd. Polym. , 2015 . 115 ( 22 ): 269 .

Khalil-Abad, M.S., Yazdanshenas, M.E. and Nateghi, M.R., Cellulose, 2009, 16(6): 1147

B. Jia, . . Zhou, J, Zhang, L.Carbohyd. Res. , 2011 . 346 ( 11 ): 1337 DOI: 10.1016/j.carres.2011.04.040 http://doi.org/10.1016/j.carres.2011.04.040 .

Jeon, H.J., Yi, S.C. and Oh, S.G., Biomaterials, 2003, 24(27): 4921

C. Yao, , X.S. Li, . . Neoh, K.G, Kang, E.T.Chinese J. Polym. Sci. , 2010 . 28 ( 4 ): 581 DOI: 10.1007/s10118-010-9094-x http://doi.org/10.1007/s10118-010-9094-x .

Emam, H.E., Mowafi, S., Mashaly, H.M. and Rehan, M., Carbohyd. Polym., 2014, 110: 148

M.H. Gabr, , N.T. Phong, , M.A. Abdelkareem, . . Kimpara, I, Fujii, T.Cellulose , 2013 . 20 ( 2 ): 819 .

Meng, N., Zhou, N.L., Zhang, S.Q. and Shen, J., Int. J. Pharm., 2009, 382(1): 45

C.H Hu, , M.S. Xia, . . Appl. Clay Sci. , 2006 . 31 ( 3 ): 180 .

S. Chen, , G Wu, , H. Zeng, . . Carbohyd. Polym. , 2005 . 60 ( 1 ): 33 DOI: 10.1016/j.carbpol.2004.11.020 http://doi.org/10.1016/j.carbpol.2004.11.020 .

H. Rosilo, , E. Kontturi, , J Seitsonen, , O. Ikkala, . . Biomacromolecules , 2013 . 14 ( 5 ): 1547 DOI: 10.1021/bm400185z http://doi.org/10.1021/bm400185z .

Q. Yang, , C.N. Wu, , T Saito, , A. Isogai, . . Carbohyd. Polym. , 2014 . 100 179 DOI: 10.1016/j.carbpol.2012.10.044 http://doi.org/10.1016/j.carbpol.2012.10.044 .

Q.Y. Wang, , J. Guo, , D.F. Xu, , J Cai, , L. Zhang, . . Cellulose , 2015 . 22 ( 6 ): 3799 DOI: 10.1007/s10570-015-0758-0 http://doi.org/10.1007/s10570-015-0758-0 .

X Fu, , S. Qutubuddin, . . Polymer , 2001 . 42 ( 2 ): 807 DOI: 10.1016/S0032-3861(00)00385-2 http://doi.org/10.1016/S0032-3861(00)00385-2 .

R.O. Mäkiniemi, , P Das, , D. Hönders, . . ACS Appl. Mater. Interfaces , 2015 . 7 ( 29 ): 15681 DOI: 10.1021/acsami.5b04676 http://doi.org/10.1021/acsami.5b04676 .

H. Qi, , C Chang. , L. Zhang, . . Cellulose , 2008 . 15 ( 6 ): 779 DOI: 10.1007/s10570-008-9230-8 http://doi.org/10.1007/s10570-008-9230-8 .

J Cai, , L. Zhang, . . Macromol. Biosci. , 2005 . 5 ( 6 ): 539 DOI: 10.1002/(ISSN)1616-5195 http://doi.org/10.1002/(ISSN)1616-5195 .

Q. Wang, , J. Cai, , L. Zhang, , M Xu, , R. Xiao, . . J. Mater. Chem. A , 2013 . 1 ( 22 ): 6678 DOI: 10.1039/c3ta11130j http://doi.org/10.1039/c3ta11130j .

J. Zeng, , S Liu, , L. Zhang, . . ACS Appl. Mater. Interfaces , 2011 . 3 ( 6 ): 2074 DOI: 10.1021/am200297b http://doi.org/10.1021/am200297b .

S.M. Li, , N. Jia, , M.G Ma, , R.C. Sun, . . Carbohyd. Polym. , 2011 . 86 ( 2 ): 441 DOI: 10.1016/j.carbpol.2011.04.060 http://doi.org/10.1016/j.carbpol.2011.04.060 .

N. Beyth, , I. Yudovin-Farber, , R. Bahir, , A.J Domb, , E.I. Weiss, . . Biomaterials , 2006 . 27 ( 21 ): 3995 DOI: 10.1016/j.biomaterials.2006.03.003 http://doi.org/10.1016/j.biomaterials.2006.03.003 .

X.F. Huang, , J.W. Jia, , Z.K Wang, , Q.L. Hu, . . Chinese J. Polym. Sci. , 2015 . 33 ( 2 ): 284 DOI: 10.1007/s10118-015-1580-8 http://doi.org/10.1007/s10118-015-1580-8 .

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Plasticizing and Strengthening Poly(vinyl chloride) with Structurally Different Ionic Liquids

Hydrogen-Bonding Crosslinked Supramolecular Polymer Materials: From Design Evolution of Side-Chain Hydrogen-Bonding to Applications

High Strength and Stable Proton Exchange Membrane Based on Perfluorosulfonic Acid/Polybenzimidazole

Enhanced Segment Mobility Promotes Stereocomplex Crystallization in Polymer Blends via Elevated Segmental Miscibility

Multiple-Responsive Chiral Hydrogels from Helical Dendronized Poly(phenylacetylene)s

Related Author

Ning-Zhong Bao

Jian Wu

Zhi-Ji Liu

Ji-Shuo Ye

Xiang Gao

Zi-Yang Xu

Qian Zhang

Wen-Guang Liu

Related Institution

State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University

State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University

School of Engineering, Hangzhou City University

School of Materials Science and Engineering, Tianjin Key Laboratory of Composite and Functional Materials, Tianjin University

College of Chemistry and Chemical Engineering, Jiangxi Normal University

⁰