Synthesis and Characterization of Crystallizable Aliphatic Thermoplastic Poly(ester urethane) Elastomers through a Non-isocyanate Route

Li Yue; Li Su-qing; Zhao Jing-bo; Zhang Zhi-yuan; Zhang Jun-ying; Yang Wan-tai

doi:10.1007/s10118-016-1839-8

Your Location：

Home >

Browse articles >

Synthesis and Characterization of Crystallizable Aliphatic Thermoplastic Poly(ester urethane) Elastomers through a Non-isocyanate Route

PAPERS | Updated：2021-05-12

- Synthesis and Characterization of Crystallizable Aliphatic Thermoplastic Poly(ester urethane) Elastomers through a Non-isocyanate Route
- Chinese Journal of Polymer Science Vol. 34, Issue 10, Pages: 1220-1233(2016)
- Affiliations：
  
  Key Laboratory of Carbon Fiber and Functional Polymers (Beijing University of Chemical Technology), Ministry of Education; State Key Laboratory of Chemical Resource Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
- Author bio：
  
  Jing-bo Zhao (赵京波), E-mail: zhaojb@mail.buct.edu.cn
- Funds：
- DOI：10.1007/s10118-016-1839-8
  CLC：
- Received：18 March 2016，
  
  Revised：2016-6-7，
  
  Accepted：09 June 2016，
  
  Published：05 October 2016
- Accepted：
Scan QR Code
Li Yue, Li Su-qing, Zhao Jing-bo, et al. Synthesis and Characterization of Crystallizable Aliphatic Thermoplastic Poly(ester urethane) Elastomers through a Non-isocyanate Route[J]. Chinese Journal of Polymer Science, 2016, 34(10): 1220-1233.
DOI：

Li Yue, Li Su-qing, Zhao Jing-bo, et al. Synthesis and Characterization of Crystallizable Aliphatic Thermoplastic Poly(ester urethane) Elastomers through a Non-isocyanate Route[J]. Chinese Journal of Polymer Science, 2016, 34(10): 1220-1233. DOI： 10.1007/s10118-016-1839-8.

摘要

Abstract

A simple non-isocyanate route is developed for synthesizing crystallizable aliphatic thermoplastic poly(ester urethane) elastomers (TPEURs) with good thermal and mechanical properties. Three prepolymers of 1

6-bis(hydroxyethyloxycarbonylamino) hexane (BHCH)

i.e.

PrePBHCHs

were prepared through the self-transurethane polycondensation of BHCH. A poly(butylene adipate) prepolymer (PrePBA) with terminal HO― groups was prepared and used as a polyester glycol. A series of TPEURs were prepared by the co-polycondensation of the PrePBHCHs with PrePBA at 170 ℃ under a reduced pressure of 399 Pa. The TPEURs were characterized by gel permeation chromatography

FTIR

H-NMR

differential scanning calorimetry

thermogravimetric analysis

wide-angle X-ray diffraction

atomic force microscopy

and tensile test. The TPEURs exhibited

up to 23300 g/mol

up to 51100 g/mol

ranging from -33.8 ℃ to -3.1 ℃

from 94.3 ℃ to 111.9 ℃

initial decomposition temperature over 274.7 ℃

tensile strength up to18.8 MPa with a strain at break of 450.0%

and resilience up to 77.5%. TPU elastomers with good crystallization and mechanical properties were obtained through a non-isocyanate route.

关键词

Keywords

references

E. Delebecq, , J.P. Pascault, . . Boutevin, B, Ganachaud, F.Chem. Rev. , 2013 . 113 80 .

Guan, J., Song, Y.H., Lin, Y., Yin, X.Z., Zuo, M., Zhao, Y.H., Tao, X.L. and Zheng, Q., Ind. Eng. Chem. Res., 2011, 50: 6517

B Ochiai, , T. Endo, . . Prog. Polym. Sci. , 2005 . 30 183 DOI: 10.1016/j.progpolymsci.2005.01.005 http://doi.org/10.1016/j.progpolymsci.2005.01.005 .

M.S. Kathalewar, , P.B. Joshi, , A.S Sabnis, , V.C. Malshe, . . RSC Adv , 2013 . 3 4110 DOI: 10.1039/c2ra21938g http://doi.org/10.1039/c2ra21938g .

B. Tamami, , S Sohn, , G.L. Wilkes, . . J. Appl. Polym. Sci. , 2004 . 92 88 .

A.L. Brocas, , G. Cendejas, , A Deffieux, , S., J. Polym. Sci. Carlotti, . . Part A: Polym. Chem. , 2011 . 49 2677 DOI: 10.1002/pola.24699 http://doi.org/10.1002/pola.24699 .

C.D Diakoumakos, , D.L. Kotzev, . . Macromol. Symp. , 2004 . 216 37 DOI: 10.1002/(ISSN)1521-3900 http://doi.org/10.1002/(ISSN)1521-3900 .

B. Ochiai, , S Inoue, , T., J. Polym. Sci. Endo, . . Part A: Polym. Chem. , 2005 . 43 6613 DOI: 10.1002/(ISSN)1099-0518 http://doi.org/10.1002/(ISSN)1099-0518 .

L. Annunziata, , A.K. Diallo, , S. Fouquay, , G. Michaud, , F. Simon, , J.M. Brusson, , J.F Carpentier, , S.M. Guillaume, . . Green Chem. , 2014 . 16 1947 DOI: 10.1039/C3GC41821A http://doi.org/10.1039/C3GC41821A .

M. Bähr, , A Bitto, , R. Mülhaupt, . . Green Chem. , 2012 . 14 1447 DOI: 10.1039/c2gc35099h http://doi.org/10.1039/c2gc35099h .

M Bähr, , R. Mülhaupt, . . Green Chem. , 2012 . 14 483 DOI: 10.1039/c2gc16230j http://doi.org/10.1039/c2gc16230j .

V. Besse, , R. Auvergne, , S. Carlotti, , G. Boutevin, , B. Otazaghine, , S. Caillol, , J.P Pascault, , B. Boutevin, . . React. Funct. Polym. , 2013 . 73 588 DOI: 10.1016/j.reactfunctpolym.2013.01.002 http://doi.org/10.1016/j.reactfunctpolym.2013.01.002 .

S. Maier, , T. Loontjens, , B Scholtens, , R. Mülhaupt, . . Macromolecules , 2003 . 36 4727 DOI: 10.1021/ma0258861 http://doi.org/10.1021/ma0258861 .

J. Zimmermann, , T. Loontjens, , B.J.R Scholtens, , R. Mülhaupt, . . Biomaterials , 2004 . 25 2713 DOI: 10.1016/j.biomaterials.2003.09.110 http://doi.org/10.1016/j.biomaterials.2003.09.110 .

D.L. Tang, , D. Mulder, , B.A.J Noordover, , C.E. Koning, . . Macromol. Rapid Commun. , 2011 . 32 1379 DOI: 10.1002/marc.201100223 http://doi.org/10.1002/marc.201100223 .

P Deepa, , M., J. Polym. Sci. Jayakannan, . . Part A: Polym. Chem. , 2008 . 46 2445 DOI: 10.1002/pola.v46:7 http://doi.org/10.1002/pola.v46:7 .

G Rokicki, , A. Piotrowska, . . Polymer , 2002 . 43 2927 DOI: 10.1016/S0032-3861(02)00071-X http://doi.org/10.1016/S0032-3861(02)00071-X .

B Ochiai, , T., J. Polym. Sci. Utsuno, . . Part A: Polym. Chem. , 2013 . 51 525 DOI: 10.1002/pola.26418 http://doi.org/10.1002/pola.26418 .

B. Sharma, , L. Ubaghs, , H. Keul, , H. Höcker, , T Loontjens, , Benthem, R. van . . Macromol. Chem. Phys. , 2004 . 205 1536 DOI: 10.1002/macp.200400056 http://doi.org/10.1002/macp.200400056 .

C.G. Li, , S.Q. Li, , J.B. Zhao, , Z.Y. Zhang, , J.Y Zhang, , W.T. Yang, . . J. Polym. Res. , 2014 . 21 498 DOI: 10.1007/s10965-014-0498-0 http://doi.org/10.1007/s10965-014-0498-0 .

S.Q. Li, , J.B. Zhao, , Z.Y. Zhang, , J.Y Zhang, , W.T. Yang, . . RSC Adv. , 2014 . 4 23720 DOI: 10.1039/c4ra02325k http://doi.org/10.1039/c4ra02325k .

Y. Deng, , S.Q. Li, , J.B. Zhao, , Z.Y. Zhang, , J.Y Zhang, , W.T. Yang, . . RSC Adv. , 2014 . 4 43406 DOI: 10.1039/C4RA05880A http://doi.org/10.1039/C4RA05880A .

Y. Deng, , S.Q. Li, , J.B. Zhao, , Z.Y. Zhang, , J.Y Zhang, , W.T. Yang, . . Chinese J. Polym. Sci. , 2015 . 33 ( 6 ): 880 DOI: 10.1007/s10118-015-1638-7 http://doi.org/10.1007/s10118-015-1638-7 .

S.Q. Li, , J.B. Zhao, , Z.Y. Zhang, , J.Y Zhang, , W.T. Yang, . . Polymer , 2015 . 57 164 DOI: 10.1016/j.polymer.2014.12.009 http://doi.org/10.1016/j.polymer.2014.12.009 .

C.Q. Huang, , S.Y. Luo, , S.Y. Xu, , J.B. Zhao, , S.L Jiang, , W.T. Yang, . . J. Appl. Polym. Sci. , 2010 . 115 155 .

H.Y. Sun, , T. Yin, , J.B. Zhao, , Z.Y Zhang, , W.T. Yang, . . Chinese J. Polym. Sci. , 2013 . 31 ( 3 ): 452 DOI: 10.1007/s10118-013-1233-8 http://doi.org/10.1007/s10118-013-1233-8 .

M.S Nikolic, , J. Djonlagic, . . Polym. Degrad. Stab. , 2001 . 74 263 DOI: 10.1016/S0141-3910(01)00156-2 http://doi.org/10.1016/S0141-3910(01)00156-2 .

S.Q. Li, , Z.H. Sang, , J.B. Zhao, , Z.Y. Zhang, , J.Y Zhang, , W.T. Yang, . . Ind. Eng. Chem. Res. , 2016 . 55 1902 DOI: 10.1021/acs.iecr.5b04083 http://doi.org/10.1021/acs.iecr.5b04083 .

D.B. Klinedinsta, , E. Yilgör, , I. Yilgör, . . Beyerc, F.L, Wilkes, G.L. , Polymer , 2005 . 46 10191 .

X.L. Zhang, , J.J. Xiao, , H.J. Zhou, , X.Q. Chen, , Y.T Li, , X.W. Qu, . . J. Polym. Res. , 2015 . 22 108 DOI: 10.1007/s10965-015-0734-2 http://doi.org/10.1007/s10965-015-0734-2 .

Q. Xing, , R.B. Li, , X. Dong, , X.Q. Zhang, , L.Y Zhang, , D.J. Wang, . . Chinese J. Polym. Sci. , 2015 . 33 ( 9 ): 1294 DOI: 10.1007/s10118-015-1679-y http://doi.org/10.1007/s10118-015-1679-y .

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Aliphatic Thermoplastic Poly(ether urethane)s Having Long PEG Sequences Synthesized through a Non-isocyanate Route

Amorphous and Crystallizable Thermoplastic Polyureas Synthesized through a One-pot Non-isocyanate Route

Porous Organic Polymers for Photocatalytic Hydrogen Peroxide Production: Recent Advances and Future Perspectives

One-handed Helical Poly(m-terphenyl acetylene)s with Broad Optical Activity Range from Ultraviolet-Visible to Near-infrared Regions

Pyrimidoisoindigo-based Polymers for Ambipolar Charge Transport

Related Author

Yong Deng

Su-qing Li

Jing-bo Zhao

Zhi-yuan Zhang

Jun-ying Zhang

Wan-tai Yang

Jia-Long Ban

Su-Qing Li

Related Institution

Key Laboratory of Carbon Fiber and Functional Polymers (Beijing University of Chemical Technology), Ministry of Education; College of Materials Science and Engineering, Beijing University of Chemical Technology

⁰