Thermomechanical and Shape Memory Properties of SCF/SBS/LLDPE Composites
PAPERS|Updated:2021-05-12
|
Thermomechanical and Shape Memory Properties of SCF/SBS/LLDPE Composites
Chinese Journal of Polymer ScienceVol. 34, Issue 11, Pages: 1354-1362(2016)
Affiliations:
a.Key Laboratory of Ministry of Education for Electronic Equipment Structure Design, Xidian University, Xi'an 710071, China
b.Department of Applied Chemistry, Northwestern Polytehnical University, Xi'an 710129, China
c.Department of Polymer materials and Engineering, College of Material Science and Engineering, North China University of Science and Technology, Tangshan 063009, China
Yong-kun Wang, Wen-chao Tian, Guang-ming Zhu, et al. Thermomechanical and Shape Memory Properties of SCF/SBS/LLDPE Composites[J]. Chinese Journal of Polymer Science, 2016, 34(11): 1354-1362.
DOI:
Yong-kun Wang, Wen-chao Tian, Guang-ming Zhu, et al. Thermomechanical and Shape Memory Properties of SCF/SBS/LLDPE Composites[J]. Chinese Journal of Polymer Science, 2016, 34(11): 1354-1362.DOI: 10.1007/s10118-016-1838-9.
Thermomechanical and Shape Memory Properties of SCF/SBS/LLDPE Composites
A thermally triggered shape memory polymer composite was prepared by blending short carbon fiber (SCF) into a blend of poly(styrene-
b
-butadiene-
b
-styrene) triblock copolymer (SBS)/linear low density polyethylene (LLDPE) prior to curing. These composites have excellent processability compared with other thermosets. The dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) were investigated to assess the thermomechanical properties of the SCF/SBS/LLDPE composite. Scanning electron microscope (SEM) imaging of the samples was performed to show the distribution of the SCF in the composite. The study specifically focused on the effect of SCF on the shape memory behavior of the SCF/SBS/LLDPE composite. The results indicated that the large amount of SCF significantly improved the mechanical property of the polymer composites while not damaging the shape memory performance. The SCF/SBS/LLDPE composites exhibited excellent shape memory behavior when the SCF content was less than 15.0 wt%. Moreover
the shape fixity ratio and shape recovery time of the SCF/SBS/LLDPE composites increased with the SCF content.
Improvements of Hydrophobicity and Toughness of Epoxy Coatings Modified with Hydroxyl-terminated Fluororubber
Effects of Different Nucleating Agents, Annealing and Pre-stretching Process on the Crystallinity and Mechanical Properties of Poly(butylene carbonate)
Advancing the Thin-film Mechanics of Conjugated Polymers: Characterization, Modulation, and Innovation
Enhanced Mechanical Properties and Prolonged Recovery Onset Period of Timed Shape Memory Hydrogels via Hydrophobic Interaction
A Phosphorus/Nitrogen-containing Phosphaphenanthrene Derivative as Flame Retardant for Poly(lactic acid)
Related Author
Yu-Tong Zhou
You-Fan Wu
Qian-Qian Yang
Hai-Bao Zhang
Ting Zhang
Hao-Yan Guo
Zhen-Jun Wang
Gang Li
Related Institution
School of Materials Science and Engineering, Chang’an University
Shaanxi Union Research Center of University and Enterprise for Advanced Transportation Infrastructure Materials
College of Water Conservancy & Architectural Engineering, Shihezi University
Chengdu Institute of Organic Chemistry, Chinese Academy of Sciences