Electroactive Shape Memory Cyanate/Polybutadiene Epoxy Composites Filled with Carbon Black

Kun Wang; Guang-ming Zhu; Xiao-gang Yan; Fang Ren; Xiao-ping Cui

doi:10.1007/s10118-016-1766-8

Your Location：

Home >

Browse articles >

Electroactive Shape Memory Cyanate/Polybutadiene Epoxy Composites Filled with Carbon Black

Updated：2021-06-21

- Electroactive Shape Memory Cyanate/Polybutadiene Epoxy Composites Filled with Carbon Black
- Chinese Journal of Polymer Science Vol. 34, Issue 4, Pages: 466-474(2016)
- Affiliations：
  
  Department of Applied Chemistry, Northwestern Polytechnical University, Xi’an 710129, China
- Author bio：
  
  *Guang-ming Zhu (朱光明), E-mail: gmzhu@nwpu.edu.cn
- Funds：
- DOI：10.1007/s10118-016-1766-8
  CLC：
- Received：21 October 2015，
  
  Revised：2015-11-16，
  
  Accepted：25 November 2015，
  
  Published：2016-04
- Accepted：
Scan QR Code
Kun Wang, Guang-ming Zhu, Xiao-gang Yan, et al. Electroactive Shape Memory Cyanate/Polybutadiene Epoxy Composites Filled with Carbon Black[J]. Chinese Journal of Polymer Science, 2016, 34(4): 466-474.
DOI：

Kun Wang, Guang-ming Zhu, Xiao-gang Yan, et al. Electroactive Shape Memory Cyanate/Polybutadiene Epoxy Composites Filled with Carbon Black[J]. Chinese Journal of Polymer Science, 2016, 34(4): 466-474. DOI： 10.1007/s10118-016-1766-8.

摘要

Abstract

Electroactive shape memory composites were synthesized using polybutadiene epoxy (PBEP) and bisphenol A type cyanate ester (BACE) filled with different contents of carbon black (CB). Dynamic mechanical analysis (DMA)

scanning electron microscopy (SEM)

electrical performance and electroactive shape memory behavior were systematically investigated. It is found that the volume resistivity decreased due to excellent electrical conductivity of CB

in turn resulting in good electroactive shape memory properties. The content of CB and applied voltage had significant influence on electroactive shape memory effect of developed BACE/PBEP/CB composites. Shape recovery can be observed within a few seconds with the CB content of 5 wt% and voltage of 60 V. Shape recovery time decreased with increasing content of CB and voltage. The infrared thermometer revealed that the temperature rises above the glass transition temperature faster with the increase of voltage and the decrease of resistance.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Static Flocculation in Carbon Black-filled Rubber: From Constrained Filler Motion to Polymer-driven Interfacial Reinforcement

Towards Efficient Electromagnetic Interference Shielding Performance for Polyethylene Composites by Structuring Segregated Carbon Black/Graphite Networks

Poly(ethylene terephthalate)/Carbon Black Composite Fibers Prepared by Electrospinning

SYNTHESIS AND CHARACTERIZATION OF FUNCTIONALIZED CARBON BLACK/POLY(VINYL ALCOHOL) HIGH REFRACTIVE INDEX NANOCOMPOSITES

PREPARATION AND PROPERTIES OF FUMED SILICA/CYANATE ESTER NANOCOMPOSITES

Related Author

Zhao-Yan Sun

Qian-Qian Gu

Ya-Fang Zheng

Hong-Guo Sun

Yuan Yin

Si-Yuan Chen

Jun-Lei Guan

Yu-Ge Wang

Related Institution

State Key Laboratory of Polymer Science and Technology, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences

School of Applied Chemistry and Engineering, University of Science and Technology of China

Center for Frontier Research & Technology, Hangzhou Zhongce Rubber Company

College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University

Key Laboratory of Advanced Materials (MOE), Department of Chemical Engineering, Tsinghua University

⁰