Enhanced Mechanics in Injection Molded Isotactic Polypropylene/Polypropylene Random Copolymer Blends <italic style="font-style: italic">via</italic> Introducing Network-like Crystal Structure

Bi-qiang Jin; Xin-peng Li; Ming Jin; Da-shan Mi; Fei-fei Wang; Chao Xia; Jie Zhang

doi:10.1007/s10118-016-1747-y

Your Location：

Home >

Browse articles >

Enhanced Mechanics in Injection Molded Isotactic Polypropylene/Polypropylene Random Copolymer Blends via Introducing Network-like Crystal Structure

Updated：2021-06-21

- Enhanced Mechanics in Injection Molded Isotactic Polypropylene/Polypropylene Random Copolymer Blends via Introducing Network-like Crystal Structure
- Chinese Journal of Polymer Science Vol. 34, Issue 2, Pages: 164-173(2016)
- Affiliations：
  
  State Key Laboratory of Polymer Materials Engineering, College of Polymer Science and Engineering, Sichuan University, Chengdu 610065, China
- Author bio：
  
  *Jie Zhang (张杰), E-mail: zhangjie@scu.edu.cn
- Funds：
- DOI：10.1007/s10118-016-1747-y
  CLC：
- Received：05 August 2015，
  
  Revised：2015-09-21，
  
  Accepted：23 October 2015，
  
  Published：2016-02
- Accepted：
Scan QR Code
Bi-qiang Jin, Xin-peng Li, Ming Jin, et al. Enhanced Mechanics in Injection Molded Isotactic Polypropylene/Polypropylene Random Copolymer Blends via Introducing Network-like Crystal Structure[J]. Chinese Journal of Polymer Science, 2016, 34(2): 164-173. DOI: 10.1007/s10118-016-1747-y.
DOI：

Bi-qiang Jin, Xin-peng Li, Ming Jin, et al. Enhanced Mechanics in Injection Molded Isotactic Polypropylene/Polypropylene Random Copolymer Blends via Introducing Network-like Crystal Structure[J]. Chinese Journal of Polymer Science, 2016, 34(2): 164-173. DOI: 10.1007/s10118-016-1747-y. DOI：

摘要

Abstract

The crystallization behavior

rheological behavior

mechanical properties and microstructures of injection molded isotactic polypropylene (

PP)

polypropylene random copolymer (

-PP) and

PP/

-PP blends were investigated. Differential scanning calorimetry (DSC) and dynamic rheological analysis illustrated that iPP and co-PP were compatible in the blends and

-PP uniformly dispersed in the iPP phase. Polarizing optical microscope (POM) was adopted to observe the crystal size and morphology evolution. The results of mechanical properties and scanning electron microscopy (SEM) indicated that the crystal size of iPP in

PP/

-PP blends (10 wt%

-PP + 90 wt%

PP and 30 wt%

-PP + 70 wt%

PP) radically decreased after the incorporation of

-PP. During crystallization

the molecular chain segments of

-PP could penetrate

PP spherulites and form a network-like crystalline structure. The network-like crystal structure could effectively transmit stress and consume more energy to overcome intermolecular forces to resist stretching. In this way

the strength would improve to a certain degree. The impact fracture mechanism of

PP/

-PP blends is quasi ductile fracture by multiple crazes. Our work discovered that the blends containing 10 wt% and 30 wt% of

-PP exhibited prominent toughness and reinforcement.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Improvement in Toughness of Polylactide by Melt Blending with Bio-based Poly(ester)urethane

COMBINED EFFECT OF MODIFIED ZEOLITE 13X AND β-NUCLEATING AGENT ON IMPROVING β-CRYSTAL CONTENT AND TOUGHENING POLYPROPYLENE RANDOM COPOLYMER

Multifunctional Polyurethane with High Strength, Toughness, and Self-healing Capacity via Tannic Acid-modified Cellulose Nanocrystals

Regulating Intermolecular Interactions through Phenyl-alkyl Side-chain Engineering for High-efficiency Organic Solar Cells

Phase Structure Formed by Rubber and Rigid Particles in a Polymer and Its Effect on the Composite Rigidity and Toughness

Related Author

Rui-lei Yu

Li-sheng Zhang

Yu-hong Feng

Ruo-yu Zhang

Jin Zhu

Jin-hua Leng

Heng Liu

Bo-bing He

Related Institution

College of Materials and Chemical Engineering, Hainan University

Ningbo Key Laboratory of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences

Polymer Physics and Chemistry, College of Chemistry, Sichuan University

Chengdu Product Quality Supervision and Inspection Institute

Kaixian Chenjia Middle School

⁰

Enhanced Mechanics in Injection Molded Isotactic Polypropylene/Polypropylene Random Copolymer Blends via Introducing Network-like Crystal Structure

DOI：10.1007/s10118-016-1747-y

摘要

Abstract

关键词

Keywords

references