Polypropylene/Silica Nanocomposites <italic style="font-style: italic">in situ</italic> Prepared <italic style="font-style: italic">via</italic> Sol-Gel Reactions Using Porous Spherical Poly(propylene-g-(styrene-<italic style="font-style: italic">alt</italic>-maleic anhydride)) Granules as Reaction Loci

Zhuo Li; Yu-hong Ma; Wan-tai Yang

doi:10.1007/s10118-015-1716-x

Your Location：

Home >

Browse articles >

Polypropylene/Silica Nanocomposites in situ Prepared via Sol-Gel Reactions Using Porous Spherical Poly(propylene-g-(styrene-alt-maleic anhydride)) Granules as Reaction Loci

PAPER | Updated：2021-06-21

- Polypropylene/Silica Nanocomposites in situ Prepared via Sol-Gel Reactions Using Porous Spherical Poly(propylene-g-(styrene-alt-maleic anhydride)) Granules as Reaction Loci
- Chinese Journal of Polymer Science Vol. 33, Issue 12, Pages: 1730-1740(2015)
- Affiliations：
  
  a.The State Key Laboratory of Chemical Resources Engineering, Beijing University of Chemical Technology, Beijing 100029, China
  b.Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029, China
- Author bio：
  
  *Wan-tai Yang (杨万泰), E-mail: yangwt@mail.buct.edu.cn
- Funds：
- DOI：10.1007/s10118-015-1716-x
  CLC：
- Received：26 May 2015，
  
  Revised：2015-06-16，
  
  Accepted：23 June 2015，
  
  Published：2015-12
- Accepted：
Scan QR Code
Zhuo Li, Yu-hong Ma, Wan-tai Yang. Polypropylene/Silica Nanocomposites in situ Prepared via Sol-Gel Reactions Using Porous Spherical Poly(propylene-g-(styrene-alt-maleic anhydride)) Granules as Reaction Loci[J]. Chinese Journal of Polymer Science, 2015, 33(12): 1730-1740. DOI: 10.1007/s10118-015-1716-x.
DOI：

Zhuo Li, Yu-hong Ma, Wan-tai Yang. Polypropylene/Silica Nanocomposites in situ Prepared via Sol-Gel Reactions Using Porous Spherical Poly(propylene-g-(styrene-alt-maleic anhydride)) Granules as Reaction Loci[J]. Chinese Journal of Polymer Science, 2015, 33(12): 1730-1740. DOI: 10.1007/s10118-015-1716-x. DOI：

摘要

Abstract

Using the porous polypropylene (PP) granules consisting of submicroparticles prepared by the reactor granular technology (RGT)

a facile process was developed to synthesize

in situ

polypropylene/silica nanocomposites where styrene-

alt

-maleic anhydride copolymers (PSM) were firstly grafted onto both the outer- and the inner-pore surfaces of PP granules via solid-phase grafting polymerization

and then a sol-gel reaction was conducted inside these micro-pores with the carboxyl acid derived from maleic anhydride as catalyst. TEM micrographs demonstrated that the silica nanoparticles obtained by this strategy had a size around 10-20 nm in diameter and uniformly dispersed in the PSM-based nanocomposites. More importantly

the silica nanoparticles could significantly reduce the size of PP spherulites. Consequently

the PP/silica nanocomposites with high transparency and good mechanical performance were achieved.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

3D Printed Polyimide/Silica Composite Aerogels for Customizable Thermal Insulation from −50 °C to 1300 °C

Understand the Temperature Sensing Behavior of Solid-state Polymerized PEDOT Hybrid Based on X-ray Scattering Studies

Microstructure Evolution and Strain Softening of Carbon Black Filled Natural Rubber Vulcanizates

Two-way Shape Memory Effect of Polycaprolactone-based Polyurethane via Synergistic Role of Hydrogen Bonding and Crystallization Tuned by Malic Acid

Enhancing Processability of Phenylethynyl-terminated Imide Oligomers and Properties of Cured Polyimides via ―CF3 Incorporation

Related Author

Dingyi Yu

Tiantian Xue

Zhuocheng Ma

Zaiyin Hu

Lijuan Long

Yue-E Miao

Wei Fan

Tianxi Liu

Related Institution

School of Materials and Architectural Engineering, Guizhou Normal University

Guizhou Aerospace Wujiang Electro-Mechanical Equipment Co., Ltd.

Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University

State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University

Shanghai Advanced Research Institute (Zhangjiang Laboratory), Chinese Academy of Sciences

⁰

Polypropylene/Silica Nanocomposites in situ Prepared via Sol-Gel Reactions Using Porous Spherical Poly(propylene-g-(styrene-alt-maleic anhydride)) Granules as Reaction Loci

DOI：10.1007/s10118-015-1716-x

摘要

Abstract

关键词

Keywords

references