Fabrication of Microporous Membranes from Melt Extruded Polypropylene Precursor Films <italic style="font-style: italic">via</italic> Stretching: Effect of Annealing

Shan Wang; Amir Saffar; Abdellah Ajji; Hong Wu; Shao-yun Guo

doi:10.1007/s10118-015-1643-x

Your Location：

Home >

Browse articles >

Fabrication of Microporous Membranes from Melt Extruded Polypropylene Precursor Films via Stretching: Effect of Annealing

PAPER | Updated：2021-06-21

- Fabrication of Microporous Membranes from Melt Extruded Polypropylene Precursor Films via Stretching: Effect of Annealing
- Chinese Journal of Polymer Science Vol. 33, Issue 7, Pages: 1028-1037(2015)
- Affiliations：
  
  a.The State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu 610065, China
  b.Research Center for High performance Polymer and Composite Systems (CREPEC), Chemical Engineering Department, Polytechnique Montreal, P.O. Box 6079, Montreal, Quebec H3C 3A7, Canada
- Author bio：
  
  **Abdellah Ajji, E-mail: abdellah.ajji@polymtl.ca
  Shao-yun Guo (郭少云), E-mail: sguo@scu.edu.cn
- Funds：
- DOI：10.1007/s10118-015-1643-x
  CLC：
- Received：04 November 2014，
  
  Revised：2014-12-10，
  
  Accepted：22 December 2014，
  
  Published：2015-07
- Accepted：
Scan QR Code
Shan Wang, Amir Saffar, Abdellah Ajji, et al. Fabrication of Microporous Membranes from Melt Extruded Polypropylene Precursor Films via Stretching: Effect of Annealing[J]. Chinese Journal of Polymer Science, 2015, 33(7): 1028-1037. DOI: 10.1007/s10118-015-1643-x.
DOI：

Shan Wang, Amir Saffar, Abdellah Ajji, et al. Fabrication of Microporous Membranes from Melt Extruded Polypropylene Precursor Films via Stretching: Effect of Annealing[J]. Chinese Journal of Polymer Science, 2015, 33(7): 1028-1037. DOI: 10.1007/s10118-015-1643-x. DOI：

摘要

Abstract

In this work

the effects of annealing conditions on the microstructure of polypropylene (PP) precursor films and further on the porous structure and permeability of stretched membranes were investigated. Combinations of WAXD

FTIR

DSC and DMA results clearly showed the crystalline orientation and crystallinity of the precursor film increased with annealing temperature

while the molecular chain entanglements in the amorphous phase decreased. Changes in the deformation behavior suggested more lamellar separation occurred for the films annealed at higher temperatures. Surface morphologies of the membranes examined by SEM revealed more pore number and uniform porous structure as the annealing temperature increased. In accordance with the SEM results

the permeability of the membranes increased with annealing temperature. On the other hand

it was found that 10 min was almost enough for the annealing process to obtain the microporous membranes with an optimal permeability.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Further Understanding on the Three Domains of Isotactic Polypropylene by Investigating the Crystalline Morphologies Evolution after Treatment at Different Domains

Effect of Annealing Temperature on Low-temperature Toughness of β-Nucleated Polypropylene Random Copolymer/Ethylene-Propylene-Diene Terpolymer Blends

Synergistic Toughening of Polypropylene Alloys Using Core-Shell High-density Polyethylene/Ethylene-Propylene Rubber and Isoprene Rubber Composite Rubber Particles

Dynamic Ionic Crosslinking Polypropylene-based Elastomers with Excellent Mechanical Properties and Antibacterial Performance

Preparation and Chiral Recognition Ability of Crystalline Cellulose Phenylcarbamate

Related Author

Ding-ding Hu

Shi-bing Ye

Fei Yu

Jia-chun Feng

Hui-li Ding

Li-yuan Guo

Dong-jing Li

De Zheng

Related Institution

State Key Laboratory of Molecular Engineering of Polymers, Collaborative Innovation Center of Polymers and Polymer Composite Materials, Department of Macromolecular Science, Fudan University

Institute of Polymer Science and Engineering, Hebei University of Technology

Guangdong Winner Functional Materials Co. Ltd.

Department of Polymer Science and Engineering, Zhejiang University

School of Materials Science and Engineering, Tsinghua University

⁰

Fabrication of Microporous Membranes from Melt Extruded Polypropylene Precursor Films via Stretching: Effect of Annealing

DOI：10.1007/s10118-015-1643-x

摘要

Abstract

关键词

Keywords

references