Influences of Hyperbranched Polyethylenimine on the Reactive Compatibilization of Polycarbonate/Polyamide Blends
PAPER|Updated:2021-06-21
|
Influences of Hyperbranched Polyethylenimine on the Reactive Compatibilization of Polycarbonate/Polyamide Blends
Chinese Journal of Polymer ScienceVol. 33, Issue 4, Pages: 652-660(2015)
Affiliations:
a.State Key Laboratory of Polymer Physics & Chemistry, Joint Laboratory of Polymer Science & Materials, Beijing National Laboratory for Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China
b.Institute of Phenolic Resin, Jinan Shengquan Group Co., Ltd., Ji'nan 250204, China
Ming-ji Wang, Guang-cui Yuan, Charles C. Han. Influences of Hyperbranched Polyethylenimine on the Reactive Compatibilization of Polycarbonate/Polyamide Blends[J]. Chinese Journal of Polymer Science, 2015, 33(4): 652-660.
DOI:
Ming-ji Wang, Guang-cui Yuan, Charles C. Han. Influences of Hyperbranched Polyethylenimine on the Reactive Compatibilization of Polycarbonate/Polyamide Blends[J]. Chinese Journal of Polymer Science, 2015, 33(4): 652-660.DOI: 10.1007/s10118-014-1475-0.
Influences of Hyperbranched Polyethylenimine on the Reactive Compatibilization of Polycarbonate/Polyamide Blends
The influences of hyperbranched polyethylenimine (hPEI)
which possesses many reactive amino end-groups
on the blending properties of bisphenol-A polycarbonate (PC) and amorphous polyamide (aPA) were systematically investigated. Scanning electron microscopy (SEM) and differential scanning calorimetry (DSC) were used to observe the effect of hPEI on morphologies of PC and aPA phases in bulk blends. While the interfacial fracture toughness between planar PC and aPA layers with and without hPEI was studied by using augmented double cantilever beam (ADCB) method. Results show that the compatibility in PC/aPA blends can be significantly improved by adding a small amount of hPEI
mainly due to the interchange reactions between the polymers leading to the formation of block copolymers
cross-linked polymers and molecules with other constitutions. The augmented double cantilever beam experiments showed that the reactive process drastically reinforced the interfacial adhesion between planar layers of PC and aPA. However
degradation takes place during annealing at 180℃
which was responsible for the production of small molar mass species of PC.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.