Studies on Crystal Transition of Polyamide 11 Nanocomposites by Variable-temperature X-Ray Diffraction
Note|Updated:2021-06-21
|
Studies on Crystal Transition of Polyamide 11 Nanocomposites by Variable-temperature X-Ray Diffraction
Chinese Journal of Polymer ScienceVol. 32, Issue 1, Pages: 115-122(2014)
Affiliations:
a.Key Laboratory of New Processing Technology for Nonferrous Metals and Materials, Ministry of Education, College of Materials Science and Engineering, Guilin University of Technology, Guilin 541004, China
b.State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai 200433, China
c.Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 3 Research Link, 117602, Singapore
Tian-xi Liu, Dan Chen, In Yee Phang, et al. Studies on Crystal Transition of Polyamide 11 Nanocomposites by Variable-temperature X-Ray Diffraction[J]. Chinese Journal of Polymer Science, 2014, 32(1): 115-122.
DOI:
Tian-xi Liu, Dan Chen, In Yee Phang, et al. Studies on Crystal Transition of Polyamide 11 Nanocomposites by Variable-temperature X-Ray Diffraction[J]. Chinese Journal of Polymer Science, 2014, 32(1): 115-122.DOI: 10.1007/s10118-014-1383-3.
Studies on Crystal Transition of Polyamide 11 Nanocomposites by Variable-temperature X-Ray Diffraction
Polyamide 11 (PA11) and its nanocomposites with different organoclay loadings were prepared by melt-compounding and subsequent pelletizing. The crystal phase transitions of PA11 and its clay nanocomposites were investigated by variable-temperature X-ray diffraction. It was found that the Brill transition of the nanocomposite was 20 K higher than that of the neat PA11 for both heating and cooling processes. The PA11
d
-spacings of the nanocomposites were observed to be smaller than those of the neat PA11 for melt crystallization. The constraints imposed by the addition of layered clay
restricting the thermal expansion of the polymer chains
are probably responsible for such a reduction of the
d
-spacing.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Poly(vinyl alcohol)/GO-MMT Nanocomposites: Preparation, Structure and Properties
Effect of Nanoclay on the Phase Separation Behavior of Poly(methyl methacrylate)/Poly(vinyl acetate) Binary Polymer Blends
INFLUENCE OF CLAY ON THE MORPHOLOGY AND PHASE SEPARATION BEHAVIOR OF POLY(METHYL METHACRYLATE)/POLY(STYRENE-co-ACRYLONITRILE) BLENDS
SYNTHESIS OF EXFOLIATED ISOTACTIC POLYPROPYLENE/FUNCTIONAL ALKYL-TRIPHENYLPHOSPHONIUM-MODIFIED CLAY NANOCOMPOSITES BY IN SITU POLYMERIZATION
TOUGHENING OF ETHYLENE-PROPYLENE RANDOM COPOLYMER/CLAY NANOCOMPOSITES: COMPARISON OF DIFFERENT COMPATIBILIZERS
Related Author
Muhammad Raheel
Kun Yao
Jiang Gong
Xue-cheng Chen
Dong-tao Liu
Yi-chao Lin
Dong-mei Cui
Muhammad Siddiq
Related Institution
State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences
Department of Chemistry, Quaid-i-Azam University
Key Laboratory of Macromolecule Synthesis and Functionalization, Ministry of Education, Department of Polymer Science and Engineering, Zhejiang University
Fine Chemicals Department, Beijing Research Institute of Chemical Industry, SINOPEC
State Key Laboratory of Polymer Physics and Chemistry, Joint Laboratory of Polymer Science and Materials, Beijing National Laboratory for Molecular Science, Institute of Chemistry, Chinese Academy of Sciences