The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization

Alireza Talaei; Faramarz Afshar Taromi; Ahmad Arefazar; Saeid Ahmadjo; Omid Moini Jazani

doi:10.1007/s10118-014-1381-5

Your Location：

Home >

Browse articles >

The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization

Updated：2021-06-21

- The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization
- Chinese Journal of Polymer Science Vol. 32, Issue 2, Pages: 137-142(2014)
- Affiliations：
  
  a.Department of Polymer Engineering and Color Technology, Amirkabir University of Technology, Tehran, Iran
  b.Department of Catalyst, Iran Polymer and Petrochemical Institute (IPPI), Tehran, Iran
  c.Department of Chemical Engineering, College of Engineering, University of Isfahan, Isfahan, Iran
- Author bio：
  
  **Ahmad Arefazar, E-mail: alirezatalaei@yahoo.com
- Funds：
- DOI：10.1007/s10118-014-1381-5
  CLC：
- Received：15 February 2013，
  
  Revised：2013-05-09，
  
  Accepted：20 May 2013，
  
  Published：2014-02
- Accepted：
Scan QR Code
Alireza Talaei, Faramarz Afshar Taromi, Ahmad Arefazar, et al. The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization[J]. Chinese Journal of Polymer Science, 2014, 32(2): 137-142.
DOI：

Alireza Talaei, Faramarz Afshar Taromi, Ahmad Arefazar, et al. The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization[J]. Chinese Journal of Polymer Science, 2014, 32(2): 137-142. DOI： 10.1007/s10118-014-1381-5.

摘要

Abstract

Ethylene polymerization was carried out by immobilization of

rac

-ethylenebis(1-indenyl)zirconium dichloride (Et(Ind)

ZrCl

) and

rac

-dimethylsilylbis(1-indenyl)zirconium dichloride (Me

Si(Ind)

ZrCl

) preactivated with methylaluminoxane (MAO) on calcinated silica at different temperatures. Polymerizations of ethylene were conducted at different temperatures to find the optimized polymerization temperature for maximum activity of the catalyst. The Me

Si bridge catalyst showed higher activity at the lower polymerization temperature compared to the Et bridge catalyst. The highest catalytic activities were obtained at temperatures about 50 ℃ and 70 ℃ for Me

Si(Ind)

ZrCl

/MAO and Et(Ind)

ZrCl

/MAO catalysts systems

respectively. Inductively coupled plasma-atomic emission spectroscopy results and polymerization activity results confirmed that the best temperature for calcinating silica was about 450 ℃ for both catalysts systems. The melting points of the produced polyethylene were about 130 ℃

which could be attributed to the linear structure of HDPE.

关键词

Keywords

references

Views

357

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Influence of Backbone and Axial Substituent of Catalyst on α-Imino-ketone Nickel Mediated Ethylene (Co)Polymerization

Benzosuberyl Substituents as a "Sandwich-like" Function in Olefin Polymerization Catalysis

Ethylene Polymerization and Copolymerization with Polar Monomers by Benzothiophene-bridged BPMO-Pd Catalysts

Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers

Durable Anti-fogging and Abrasion-resistant Coatings Based on Polyoxometalates-Hydrophilic Resin Composites with Enhanced Cohesion and Adhesion

Related Author

Zhong-Bao Jian

Yi-Xin Zhang

Da-Jun Liu

Yue Zhang

Xiao-Qiang Hu

Yu-Kai Chu

Yue Chi

Yi-Xin Zhang

Related Institution

College of Chemistry and Environmental Engineering, Changchun University of Science and Technology

State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences

College of Chemistry and Life Science, Advanced Institute of Materials Science, Changchun University of Technology

Key Laboratory of Advanced Structural Materials of Ministry of Education, College of Material Science and Engineering, Changchun University of Technology

⁰