Fabrication of Hydrophilic and Sponge-like PVDF/Brush-like Copolymer Blend Membranes Using Triethylphosphate as Solvent
|Updated:2021-06-21
|
Fabrication of Hydrophilic and Sponge-like PVDF/Brush-like Copolymer Blend Membranes Using Triethylphosphate as Solvent
Chinese Journal of Polymer ScienceVol. 32, Issue 2, Pages: 143-150(2014)
Affiliations:
MOE Key Laboratory of Macromolecular Synthesis and Functionalization MOE Engineering Research Center of Membrane and Water Treatment Technology Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, China
Jian-hua Wang, Yong-hua Zhang, You-yi Xu, et al. Fabrication of Hydrophilic and Sponge-like PVDF/Brush-like Copolymer Blend Membranes Using Triethylphosphate as Solvent[J]. Chinese Journal of Polymer Science, 2014, 32(2): 143-150.
DOI:
Jian-hua Wang, Yong-hua Zhang, You-yi Xu, et al. Fabrication of Hydrophilic and Sponge-like PVDF/Brush-like Copolymer Blend Membranes Using Triethylphosphate as Solvent[J]. Chinese Journal of Polymer Science, 2014, 32(2): 143-150.DOI: 10.1007/s10118-014-1371-7.
Fabrication of Hydrophilic and Sponge-like PVDF/Brush-like Copolymer Blend Membranes Using Triethylphosphate as Solvent
Porous PVDF blend membranes with good hydrophilicity and a symmetric structure were prepared by the phase inversion method using amphiphilic brush-like copolymers
P(MMA-
r
-PEGMA)
as hydrophilic additive and triethylphosphate (TEP) as solvent. P(MMA-
r
-PEGMA) was synthesized by radical polymerization in TEP. Then the obtained amphiphilic copolymer solution was mixed with PVDF and TEP to prepare the dope solution. The effects of P(MMA-
r
-PEGMA) content and coagulation composition on membrane morphologies were investigated using scanning electron microscopy (SEM). The results demonstrated that
even blended with amphiphilic copolymers
a symmetric structure can be formed. Hollow fiber membranes with a mainly symmetric structure were also fabricated. The dry hollow fiber membranes showed good hydrophilicity
high flux and good rejection performance because of their hydrophilic surface and pores wall.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Melt Shear-induced γ-Phase Crystallization of Poly(vinylidene fluoride) in Miscible Crystalline/Crystalline Blends
An Excellent Biobased Copolymerization Monomer Module: Synthesis of Biobased Copolymers with Excellent Heat Resistance and Hydrophilic Properties
Synthesis and Characterization of α-End Functionalized 3,4-Polyisoprene Using Fe(acac)3/IITP/AliBu3 Catalyst
Circularly Polarized Luminescence Based on Helical Polymers: Structure-Property Relationships and Regulation Mechanisms
Silk Sericin-inspired Poly-β-homoserine for Protein Protection
Related Author
Ze-Kai Zheng
Shuai-Fei Zhang
Long-Qing Wang
Meng-Chao Kuang
Zhen Zhang
Chong-Yang Wang
Yan-Ping Liu
Chun-Tai Liu
Related Institution
National Engineering Research Center for Advanced Polymer Processing Technology, Key Laboratory of Materials Processing and Mold (Zhengzhou University), Ministry of Education, Zhengzhou University
National Center for International Joint Research of Micro-nano Molding Technology, School of Mechanics and Safety Engineering, Zhengzhou University
School of Chemistry and Chemical Engineering, State Key Laboratory Incubation Base for Green Processing of Chemical Engineering, Shihezi University
School of Polymer Science and Engineering, Qingdao University of Science & Technology
Shandong Provincial College Laboratory of Rubber Material and Engineering, School of Polymer Science and Engineering, Qingdao University of Science & Technology