MORPHOLOGY, CRYSTALLIZATION AND MECHANICAL PROPERTIES OF POLY(ε-CAPROLACTONE)/GRAPHENE OXIDE NANOCOMPOSITES
PAPER|Updated:2023-01-03
|
MORPHOLOGY, CRYSTALLIZATION AND MECHANICAL PROPERTIES OF POLY(ε-CAPROLACTONE)/GRAPHENE OXIDE NANOCOMPOSITES
Chinese Journal of Polymer ScienceVol. 31, Issue 8, Pages: 1148-1160(2013)
Affiliations:
a.School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China
b.School of Automotive Engineering and State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, China
Guang-shuo Wang, Zhi-yong Wei, Lin Sang, et al. MORPHOLOGY, CRYSTALLIZATION AND MECHANICAL PROPERTIES OF POLY(ε-CAPROLACTONE)/GRAPHENE OXIDE NANOCOMPOSITES[J]. Chinese Journal of Polymer Science, 2013, 31(8): 1148-1160. DOI: 10.1007/s10118-013-1278-8.
DOI:
Guang-shuo Wang, Zhi-yong Wei, Lin Sang, et al. MORPHOLOGY, CRYSTALLIZATION AND MECHANICAL PROPERTIES OF POLY(ε-CAPROLACTONE)/GRAPHENE OXIDE NANOCOMPOSITES[J]. Chinese Journal of Polymer Science, 2013, 31(8): 1148-1160. DOI: 10.1007/s10118-013-1278-8.DOI:
MORPHOLOGY, CRYSTALLIZATION AND MECHANICAL PROPERTIES OF POLY(ε-CAPROLACTONE)/GRAPHENE OXIDE NANOCOMPOSITES
-caprolactone) (PCL) and graphene oxide (GO) were prepared by
in situ
polymerization. Scanning electron microscopy observation revealed not only a well dispersion of GO but also a strong interfacial interaction between GO and the PCL matrix
as evidenced by the presence of some GO nanosheets embedded in the matrix. Effects of GO nanofillers on the crystal structure
crystallization behavior and spherulitic morphology of the PCL matrix were investigated in detail. The results showed that the crystallization temperature of PCL enhanced significantly due to the presence of GO in the nanocomposites
however
the addition of GO did not affect the crystal structure greatly. Thermal stability of PCL remarkably increased with the addition of GO nanosheets
compared with that of pure PCL. Incorporation of GO greatly improved the tensile strength and Young’s modulus of PCL without a significant loss of the elongation at break.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Regulating Intermolecular Interactions through Phenyl-alkyl Side-chain Engineering for High-efficiency Organic Solar Cells
Synergistic Bioinspired Interface and Segregated Graphene Oxide Networks Enabling Enhanced Mechanical Strength and Chemical Resistance in Natural Rubber Latex Composites
Compatibilizer-aided Fabrication of a 'High-entropy Polymer Blend'
Influence of the Type of Precipitant on the Structure of Phase-inversion Polyamido-imide Membranes
Multiple-Responsive Chiral Hydrogels from Helical Dendronized Poly(phenylacetylene)s
Related Author
Yang Yi
Shen-Bo Zhu
Ming-Hao Jin
Jia-Yin Lyu
Zhi-Bo Wang
Rui-Han Li
Xiao-Nan Xu
Xue-Chen Jiao
Related Institution
State Key Laboratory of Advanced Fiber Materials, College of Materials Science and Engineering, Donghua University
National Synchrotron Radiation Laboratory, University of Science and Technology of China
Hubei Key Laboratory for New Textile Materials and Applications, College of Materials Science and Engineering, Wuhan Textile University
State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology
School of Materials Science and Engineering, Beijing University of Chemical Technology