SYNTHESIS AND CHARACTERIZATION OF A NOVEL MACROMOLECULAR SURFACE MODIFIER FOR POLYETHYLENE

Min-min Zhang; Si-wei Liu; Yi Zhang; Liang-hui Chen; Zhen-guo Chi; Jia-rui Xu

doi:10.1007/s10118-013-1277-9

Your Location：

Home >

Browse articles >

SYNTHESIS AND CHARACTERIZATION OF A NOVEL MACROMOLECULAR SURFACE MODIFIER FOR POLYETHYLENE

Special Issue: In Honor of the 80th Birthday of Professor Fosong Wang (Part II) | Updated：2023-01-03

- SYNTHESIS AND CHARACTERIZATION OF A NOVEL MACROMOLECULAR SURFACE MODIFIER FOR POLYETHYLENE
- Chinese Journal of Polymer Science Vol. 31, Issue 6, Pages: 894-900(2013)
- Affiliations：
  
  Key Laboratory for Polymeric Composite and Functional Materials of the Ministry of Education, DSAPM Lab, School of Chemistry and Chemical Engineering, Sun Yat-Sen University, Guangzhou 510275, China
- Author bio：
  
  **Yi zhang (张艺), E-mail: ceszy@mail.sysu.edu.cn
  Jia-rui Xu (许家瑞), E-mail: xjr@mail.sysu.edu.cn
- Funds：
- DOI：10.1007/s10118-013-1277-9
  CLC：
- Received：04 January 2013，
  
  Revised：2013-01-30，
  
  Accepted：04 February 2013，
  
  Published：2013-06
- Accepted：
Scan QR Code
Min-min Zhang, Si-wei Liu, Yi Zhang, et al. SYNTHESIS AND CHARACTERIZATION OF A NOVEL MACROMOLECULAR SURFACE MODIFIER FOR POLYETHYLENE[J]. Chinese Journal of Polymer Science, 2013, 31(6): 894-900.
DOI：

Min-min Zhang, Si-wei Liu, Yi Zhang, et al. SYNTHESIS AND CHARACTERIZATION OF A NOVEL MACROMOLECULAR SURFACE MODIFIER FOR POLYETHYLENE[J]. Chinese Journal of Polymer Science, 2013, 31(6): 894-900. DOI： 10.1007/s10118-013-1277-9.

摘要

Abstract

A new macromolecular surface modifier

a copolymer of lauryl methacrylate (LMA) and poly(ethylene glycol) methyl methacrylate (PEGMA)

was synthesized through free radical polymerization. The copolymer was characterized by nuclear magnetic resonance spectrum (

H-NMR) and thermogravimetric analysis (TGA). The copolymer was used to blend with polyethylene. The binary blends have been characterized by attenuated total reflection/Fourier transform infrared (ATRFTIR)

contact-angle measurements (CDA) and scanning electron microscopy (SEM). The results indicated that poly(ethylene glycol) methyl methacrylate-

-lauryl methacrylate (PEGMA-

-LMA) could diffuse preferably onto the surface of the polyethylene (PE) film

and thus can be used as an efficient surface modifier for PE.

关键词

Keywords

references

Views

157

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers

Modulating Molecular Weight of Polyethylenes from Oligomer to Polymer Using Highly Thermal Stable Cationic α-Diimine Palladium Complexes

Alkyl Alcohol Chain-length Mediated Steric Hindrance at Support Surface in Heterogeneous α-Diimine Ni Catalysts for Modulating Ethylene Polymerization

Experimental Investigation of Graphene and TiO2 Reinforced Poly(vinyl alcohol)-based Fiber Metal Laminates

End-group and Side-chain Dual-engineering of Selenium-fused Acceptors for 20.08% Efficiency Polymer Solar Cells with Low Energy Loss

Related Author

Hui Tian

Chun-Ji Wu

Bao-Li Wang

Feng-Bin Liu

Chun-Yu Zhang

Xue-Quan Zhang

Heng Liu

Xiao-Hua Wang

Related Institution

School of Applied Chemistry and Engineering, University of Science and Technology of China

State Key Laboratory of Polymer Science and Technology, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences

State Key Laboratory of Advanced Optical Polymer and Manufacturing Technology, Key Laboratory of Rubber-Plastics, Ministry of Education, School of Polymer Science and Engineering, Qingdao University of Science & Technology

School of Chemistry and Chemical Engineering/State Key Laboratory Incubation Base for Green Processing of Chemical Engineering, Shihezi University

State Key Laboratory of Precision and Intelligent Chemistry, Department of Polymer Science and Engineering, University of Science and Technology of China

⁰