Chinese Journal of Polymer ScienceVol. 31, Issue 7, Pages: 994-1001(2013)
Affiliations:
a.Institute of Biomedical and Pharmaceutical Technology & College of Chemistry and Chemical Engineering, Fuzhou University, Fuzhou 350001, China
b.Institute of Polymer Science, Key Laboratory of Macromolecule Synthesis and Functionalization, (Ministry of Education), Zhejiang University, Hangzhou 310027, China
A novel method for the surface modification of PVDF porous membranes was introduced. Styrene-(
N
-(4-hydroxyphenyl) maleimide) alternating copolymer SHMI-Br was blended with PVDF to fabricate SHMI-Br/PVDF membranes. The C-Br bond on the SHMI-Br/PVDF membrane was served as initial site of ATRP
and P(PEGMA) brush was grafted on the PVDF membrane. Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR/FTIR) was used to prove the P(PEGMA) brushes were successfully grafted onto the SHMI-Br/PVDF membrane surface. Introduction of P(PEGMA) brushes on the PVDF membrane surface enhanced the hydrophilicity effectively. When the PEGMA degree of grafting was 16.7 wt%
the initial contact angle of PVDF membrane decreased from 98° to 42°. The anti-fouling ability of PVDF membrane was improved significantly after P(PEGMA) brush was grafted. Taking the PEGMA degree of grafting 16.7 wt% as an example
the flux of protein solution was about 151.21 L/(m
2
h) when the pH value of the BSA solution was 4.9. As the pH value was increased to 7.4
the flux was changed to 180.06 L/(m
2
h). However
the protein solution flux of membrane M3 (PEGMA: 0 wt%) was only 73.84 L/(m
2
h) and 113.52 L/(m
2
h) at pH 4.9 and 7.4
respectively.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Amino Acids Functionalized Graphene Oxide for Enhanced Hydrophilicity and Antifouling Property of Poly(vinylidene fluoride) Membranes
An Excellent Biobased Copolymerization Monomer Module: Synthesis of Biobased Copolymers with Excellent Heat Resistance and Hydrophilic Properties
Synthesis and Characterization of α-End Functionalized 3,4-Polyisoprene Using Fe(acac)3/IITP/AliBu3 Catalyst
Layered Gradient-structured Coating with Sustained Lubricating Performance for the Surface Functionalization of Implant Materials
Silk Sericin-inspired Poly-β-homoserine for Protein Protection
Related Author
Jian-hua Li
Shuang-shuang Wang
De-bin Zhang
Xing-xing Ni
Qi-qing Zhang
Xiao-Jun Ma
Xiao-Qing Hao
Hong-Ji Wang
Related Institution
Institute of Biomedical and Pharmaceutical Technology, Fuzhou University
School of Chemistry and Chemical Engineering, State Key Laboratory Incubation Base for Green Processing of Chemical Engineering, Shihezi University
Key Lab of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Lab of Rubber-plastics, School of Polymer Science and Engineering, Qingdao University of Science & Technology
Shandong Provincial College Laboratory of Rubber Material and Engineering, School of Polymer Science and Engineering, Qingdao University of Science & Technology
School of Polymer Science and Engineering, Qingdao University of Science & Technology