SYNTHESIS AND CHARACTERIZATION OF BIODEGRADABLE POLYESTERAMIDES CONSTRUCTED MAINLY BY ALTERNATING DIESTERDIAMIDE UNITS FROM N,N'-BIS(2-HYDROXYETHYL)-ADIPAMIDE AND DIACIDS
PAPER|Updated:2023-01-03
|
SYNTHESIS AND CHARACTERIZATION OF BIODEGRADABLE POLYESTERAMIDES CONSTRUCTED MAINLY BY ALTERNATING DIESTERDIAMIDE UNITS FROM N,N'-BIS(2-HYDROXYETHYL)-ADIPAMIDE AND DIACIDS
Chinese Journal of Polymer ScienceVol. 31, Issue 3, Pages: 452-461(2013)
Affiliations:
Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education; State Key Laboratory of Chemical Resource Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
Hui-yun Sun, Tiao Yin, Jing-bo Zhao, et al. SYNTHESIS AND CHARACTERIZATION OF BIODEGRADABLE POLYESTERAMIDES CONSTRUCTED MAINLY BY ALTERNATING DIESTERDIAMIDE UNITS FROM N,N'-BIS(2-HYDROXYETHYL)-ADIPAMIDE AND DIACIDS[J]. Chinese Journal of Polymer Science, 2013, 31(3): 452-461.
DOI:
Hui-yun Sun, Tiao Yin, Jing-bo Zhao, et al. SYNTHESIS AND CHARACTERIZATION OF BIODEGRADABLE POLYESTERAMIDES CONSTRUCTED MAINLY BY ALTERNATING DIESTERDIAMIDE UNITS FROM N,N'-BIS(2-HYDROXYETHYL)-ADIPAMIDE AND DIACIDS[J]. Chinese Journal of Polymer Science, 2013, 31(3): 452-461.DOI: 10.1007/s10118-013-1233-8.
SYNTHESIS AND CHARACTERIZATION OF BIODEGRADABLE POLYESTERAMIDES CONSTRUCTED MAINLY BY ALTERNATING DIESTERDIAMIDE UNITS FROM N,N'-BIS(2-HYDROXYETHYL)-ADIPAMIDE AND DIACIDS
Two kinds of aliphatic alternating polyesteramide prepolymers were prepared through melt polycondensation from
N
N
'-bis(2-hydroxyethyl)-adipamide and adipic acid or sebacic acid. Chain extension of them was conducted with 2
2′-(1
4- phenylene)-bis(2-oxazoline) and adipoyl biscaprolactamate as combined chain extenders. The chain extended polyesteramides (ExtPEAs) were characterized by IR
1
H-NMR
differential scanning calorimetry
thermogravimetric analysis
wide angle X-ray scattering
tensile test and enzymatic degradation. The results showed that the ExtPEA(4
m
)s were mainly constituted with the diester adipamide alternating units. ExtPEA(4
4) and ExtPEA(4
8) had
T
m
of 83.8℃ and 85.8℃ and initial decomposition temperature above 310.0℃. They crystallized similarly as Nylon-66 did and were flexible thermoplastic materials with tensile strength up to 25.64 MPa and strain at break up to 737%.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Cross-linked Polyamides Prepared through Direct Bulk Michael Addition and Polycondensation from 1,6-Hexanediamine and Methyl Acrylate
Comparative Studies on Properties of Polymers with Bulky Side Groups Synthesized by Cyclopolymerization of α,ω-Dienes and α,ω-Diynes
Preparation and Characterization of Flexible, Transparent and Thermally Stable Aromatic Co-polyamides
Self-assembly and Properties of Block Copolymers Containing Mesogen-Jacketed Liquid Crystalline Polymers as Rod Blocks
Synthesis and Characterization of S,N-Heteroacenes by Bischler-Napieralski Reaction
Related Author
Jin-Nan Zhao
Jing-Bo Zhao
Zhi-Yuan Zhang
Jun-Ying Zhang
Sheng-Qing Yang
Zhi-Qiang Fan
Jun-Ting Xu
Zhi-Sheng Fu
Related Institution
Key Laboratory of Carbon Fiber and Functional Polymers (Beijing University of Chemical Technology), Ministry of Education; College of Materials Science and Engineering, Beijing University of Chemical Technology
Ministry of Education Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University
Unidad de Materiales, Centro de Investigación Científica de Yucatán A. C., Calle 43 No.130 x 32 y 34, Col. Chuburná de Hidalgo, C.P. 97205, Mérida, Yucatán, México
Centro de Investigación y de Estudios Avanzados del IPN, Unidad Mérida, Departamento de Física Aplicada, Km. 6 Antigua Carretera a Progreso, AP 73-Cordemex, Mérida Yucatán97310, México
Beijing National Laboratory for Molecular Sciences, Key Laboratory of Polymer Chemistry and Physics of Ministry of Education, Center for Soft Matter Science and Engineering, College of Chemistry and Molecular Engineering, Peking University