SYNTHESIS AND CHARACTERIZATION OF HIGH MOLECULAR WEIGHT POLY(1,2-PROPYLENE CARBONATE-<italic style="font-style: italic">co</italic>-1,2-CYCLOHEXYLENE CARBONATE) USING ZINC COMPLEX CATALYST

Jing-shu Wu; Min Xiao; Hu He; Shuan-jin Wang; Dong-mei Han; Yue-zhong Meng

doi:10.1007/s10118-011-1078-y

Your Location：

Home >

Browse articles >

SYNTHESIS AND CHARACTERIZATION OF HIGH MOLECULAR WEIGHT POLY(1,2-PROPYLENE CARBONATE-co-1,2-CYCLOHEXYLENE CARBONATE) USING ZINC COMPLEX CATALYST

PAPER | Updated：2021-06-21

- SYNTHESIS AND CHARACTERIZATION OF HIGH MOLECULAR WEIGHT POLY(1,2-PROPYLENE CARBONATE-co-1,2-CYCLOHEXYLENE CARBONATE) USING ZINC COMPLEX CATALYST
- Chinese Journal of Polymer Science Vol. 29, Issue 5, Pages: 552-559(2011)
- Affiliations：
  
  The Key Laboratory of Low-carbon Chemistry & Energy Conservation of Guangdong Province/State Key Laboratory of Optoelectronic Materials and Technologies, Sun Yat-Sen University, Guangzhou 510275, China
- Author bio：
  
  **Min Xiao (肖敏), E-mail: stsxm@mail.sysu.edu.cn
  Yue-zhong Meng (孟跃中), E-mail: mengyzh@mail.sysu.edu.cn
- Funds：
- DOI：10.1007/s10118-011-1078-y
  CLC：
- Received：27 August 2010，
  
  Revised：2010-11-23，
  
  Accepted：24 November 2010，
  
  Published：2011
- Accepted：
Scan QR Code
Jing-shu Wu, Min Xiao, Hu He, et al. SYNTHESIS AND CHARACTERIZATION OF HIGH MOLECULAR WEIGHT POLY(1,2-PROPYLENE CARBONATE-co-1,2-CYCLOHEXYLENE CARBONATE) USING ZINC COMPLEX CATALYST[J]. Chinese Journal of Polymer Science, 2011, 29(5): 552-559. DOI: 10.1007/s10118-011-1078-y.
DOI：

Jing-shu Wu, Min Xiao, Hu He, et al. SYNTHESIS AND CHARACTERIZATION OF HIGH MOLECULAR WEIGHT POLY(1,2-PROPYLENE CARBONATE-co-1,2-CYCLOHEXYLENE CARBONATE) USING ZINC COMPLEX CATALYST[J]. Chinese Journal of Polymer Science, 2011, 29(5): 552-559. DOI: 10.1007/s10118-011-1078-y. DOI：

摘要

Abstract

Using supported multi-component zinc dicarboxylate catalyst

poly(1

2-propylene carbonate-

-1

2-cyclohexylene carbonate) (PPCHC) was successfully synthesized from carbon dioxide (CO

) with propylene oxide (PO) and cyclohexene oxide (CHO). The conversion of epoxides dramatically increased up to 89.7% (yield: 384.2 g of polymer per g of Zn) with increasing reaction temperature from 60℃ to 80℃. The optimized reaction temperature is 80℃. The chemical structure

the molecular weight

as well as thermal and mechanical properties of the resulting terpolymers were investigated extensively. When CHO feed content (mol%) is lower than 10%

the PPCHC terpolymers have number average molecular weight (

) ranging from 102 × 10

to 202 × 10

and molecular weight distribution (MWD) values ranging from 2.8 to 3.5. In contrast to poly(propylene carbonate) (PPC)

the introduction of small amount of CHO leads to increase in the glass transition temperature from 38.0℃ to 42.6℃. Similarly

the mechanical strength of the synthesized terpolymer is greatly enhanced due to the incorporation of CHO. These improvements in mechanical and thermal properties are of importance for the practical application of PPC.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Steric Hindrance Ligand Strategy to Aluminum Porphyrin Catalyst for Completely Alternative Copolymerization of CO2 and Propylene Oxide

ALTERNATING COPOLYMERIZATION OF CYCLOHEXENE OXIDE AND CARBON DIOXIDE UNDER COBALT PORPHYRIN CATALYST

CO2-Sourced Poly(chloropropylene carbonate) with High Flame-Retardant Performance

Rapid Conversion of Perhydropolysilazane into Thin Silica Coating at Low Temperature

Highly Regio- and trans-Selective Ring-opening Metathesis Polymerization of Chiral Aza-norbornene with a Simple Phenylimido-Tungsten Catalyst

Related Author

Fo-Song Wang

Xian-Hong Wang

Yu-Sheng Qin

Chun-Wei Zhuo

Yu-sheng Qin

Li-jie Chen

Xian-hong Wang

Xiao-jiang Zhao

Related Institution

Key Laboratory of Polymer Ecomaterial, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences

University of Science and Technology of China

Key Laboratory of Polymer Ecomaterials, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences

Shanxi Coal Chemical Industry Technology Research Institute Co., Ltd.

Zhejiang Key Laboratory of Plastic Modification and Processing Technology, College of Materials Science and Engineering, Zhejiang University of Technology

⁰

SYNTHESIS AND CHARACTERIZATION OF HIGH MOLECULAR WEIGHT POLY(1,2-PROPYLENE CARBONATE-co-1,2-CYCLOHEXYLENE CARBONATE) USING ZINC COMPLEX CATALYST

DOI：10.1007/s10118-011-1078-y

摘要

Abstract

关键词

Keywords

references