EFFECT OF SURFACE MODIFICATION OF MONTMORILLONITE ON THE PROPERTIES OF RIGID POLYURETHANE FOAM COMPOSITES

Zhong-bin Xu a; b; Wei-wei Kong a; Ming-xing Zhou a

doi:10.1007/s10118-010-9111-0

Your Location：

Home >

Browse articles >

EFFECT OF SURFACE MODIFICATION OF MONTMORILLONITE ON THE PROPERTIES OF RIGID POLYURETHANE FOAM COMPOSITES

Papers | Updated：2021-06-21

- EFFECT OF SURFACE MODIFICATION OF MONTMORILLONITE ON THE PROPERTIES OF RIGID POLYURETHANE FOAM COMPOSITES
- Vol. 28, Issue 4, Pages: 615-624(2010)
- Affiliations：
- Author bio：
- Funds：
- DOI：10.1007/s10118-010-9111-0
  CLC：
- Published：20 July 2010
- Accepted：
Scan QR Code
Zhong-bin Xu a, b, Wei-wei Kong a, et al. EFFECT OF SURFACE MODIFICATION OF MONTMORILLONITE ON THE PROPERTIES OF RIGID POLYURETHANE FOAM COMPOSITES[J]. 2010, 28(4): 615-624.
DOI：

Zhong-bin Xu a, b, Wei-wei Kong a, et al. EFFECT OF SURFACE MODIFICATION OF MONTMORILLONITE ON THE PROPERTIES OF RIGID POLYURETHANE FOAM COMPOSITES[J]. 2010, 28(4): 615-624. DOI： 10.1007/s10118-010-9111-0.

摘要

This study investigated the influence of various organically modified montmorillonites (organoclays) on the structure and properties of rigid polyurethane foam (RPUF) nanocomposites. The organoclays were modified with cetyltrimethyl ammonium bromide (CTAB)

methyl tallow bis(2-hydroxyethyl) quaternary ammonium chloride (MT2ETOH) and tris(hydroxymethyl)aminomethane (THMA) and denoted as CMMT

Cloisite 30B and OMMT

respectively. MT2ETOH and THMA contain hydroxyl groups

while THMA does not have long aliphatic tail in its molecule. X-ray diffraction and transmission electron microscopy show that OMMT and Cloisite 30B can be partially exfoliated in the RPUF nanocomposites because their intercalating agents MT2ETOH and THMA can react with isocyanate. However

CMMT modified with nonreactive CTAB is mainly intercalated in the RPUF matrices. At a relatively low filler content

the RPUF/CMMT composite foam has a higher specific compressive strength (the ratio of compressive strength against the apparent density of the foams)

while at relatively high filler contents

RPUF/Cloisite 30B and RPUF/OMMT composites have higher specific compressive strengths

higher modulus and more uniform pore size than the RPUF/CMMT composite.

Abstract

methyl tallow bis(2-hydroxyethyl) quaternary ammonium chloride (MT2ETOH) and tris(hydroxymethyl)aminomethane (THMA) and denoted as CMMT

Cloisite 30B and OMMT

respectively. MT2ETOH and THMA contain hydroxyl groups

CMMT modified with nonreactive CTAB is mainly intercalated in the RPUF matrices. At a relatively low filler content

the RPUF/CMMT composite foam has a higher specific compressive strength (the ratio of compressive strength against the apparent density of the foams)

while at relatively high filler contents

RPUF/Cloisite 30B and RPUF/OMMT composites have higher specific compressive strengths

higher modulus and more uniform pore size than the RPUF/CMMT composite.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

From Molecular Defect to Macroscopic Performance: Manipulating Dichroism and Mechanics in Iodine-doped Poly(vinyl alcohol) via Ethylene Incorporation

Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers

Circularly Polarized Luminescence Based on Helical Polymers: Structure-Property Relationships and Regulation Mechanisms

Pyrimidoisoindigo-based Polymers for Ambipolar Charge Transport

Porous Organic Polymers for Photocatalytic Hydrogen Peroxide Production: Recent Advances and Future Perspectives

Related Author

No data

Related Institution

No data

⁰