RADIATION SYNTHESIS AND CHARACTERIZATION OF POLY(AA-co-NVP)/CLAY HYDROGELS

Hong-yan Song a; b; Wen-tao Liu a; Su-qin He a; Ming-cheng Yang a; Ya Gao a; Cheng-shen Zhu a

Your Location：

Home >

Browse articles >

RADIATION SYNTHESIS AND CHARACTERIZATION OF POLY(AA-co-NVP)/CLAY HYDROGELS

Papers | Updated：2021-06-21

- RADIATION SYNTHESIS AND CHARACTERIZATION OF POLY(AA-co-NVP)/CLAY HYDROGELS
- Vol. 26, Issue 2, Pages: 213-219(2008)
- Affiliations：
- Author bio：
- Funds：
- DOI：
  CLC：
- Published：20 March 2008
- Accepted：
Scan QR Code
Hong-yan Song a, b, Wen-tao Liu a, et al. RADIATION SYNTHESIS AND CHARACTERIZATION OF POLY(AA-co-NVP)/CLAY HYDROGELS[J]. 2008, 26(2): 213-219.
DOI：

Hong-yan Song a, b, Wen-tao Liu a, et al. RADIATION SYNTHESIS AND CHARACTERIZATION OF POLY(AA-co-NVP)/CLAY HYDROGELS[J]. 2008, 26(2): 213-219. DOI：

摘要

The pH-sensitive P(AA-co-NVP)/clay hydrogels were prepared with the monomers of acrylic acid (AA) and N-vinyl-2-pyrrolidone (NVP) based on γ-ray irradiation technique. The influence of pH values of buffer solutions and contents of clay and NVP on the equilibrium swelling ratio (SR) and compressive properties of the hydrogels was investigated in detail. The results of swelling property tests showed that

with the increase of clay content

the SR of hydrogels increases in the same buffer solution

and the SR of hydrogels with different contents of HTMAB-clay is higher than that of P(AA-co-NVP) hydrogels without clay. When the content of clay is 15%

the SR of P(AA-co-NVP)/clay hydrogel is 201 at pH = 9.8

which is 1.23 times of that of the P(AA-co-NVP) hydrogel (164). In addition

the SR of P(AA-co-NVP)/clay hydrogel is higher than that of PAA/clay hydrogel in the same solution. The compressive properties of the hydrogel were also examined. The results showed that the compressive properties of the P(AA-co-NVP)/clay hydrogels were improved distinctly as compared to those of the conventional hydrogels without clay. When the content of clay is 15%

the compression strength of the P(AA-co-NVP)/clay hydrogel is 23 times of that of the P(AA-co-NVP) hydrogel.

Abstract

with the increase of clay content

the SR of hydrogels increases in the same buffer solution

and the SR of hydrogels with different contents of HTMAB-clay is higher than that of P(AA-co-NVP) hydrogels without clay. When the content of clay is 15%

the SR of P(AA-co-NVP)/clay hydrogel is 201 at pH = 9.8

which is 1.23 times of that of the P(AA-co-NVP) hydrogel (164). In addition

the compression strength of the P(AA-co-NVP)/clay hydrogel is 23 times of that of the P(AA-co-NVP) hydrogel.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Squaramide-directed Cooperative One-dimensional Assembly in Telechelic Polydimethylsiloxane for Hierarchical Network Formation

Molecularly Engineered Polyimide Films with Switchable Cavitation for Bidirectional Passive Thermal Regulation

Porous Organic Polymers for Photocatalytic Hydrogen Peroxide Production: Recent Advances and Future Perspectives

End-group and Side-chain Dual-engineering of Selenium-fused Acceptors for 20.08% Efficiency Polymer Solar Cells with Low Energy Loss

Durable Anti-fogging and Abrasion-resistant Coatings Based on Polyoxometalates-Hydrophilic Resin Composites with Enhanced Cohesion and Adhesion

Related Author

No data

Related Institution

No data

⁰