FTIR STUDIES ON THE MODEL POLYURETHANE HARD SEGMENTS BASED ON A NEW WATERBORNE CHAIN EXTENDER DIMETHYLOL BUTANOIC ACID (DMBA)*

Your Location：

Home >

Browse articles >

FTIR STUDIES ON THE MODEL POLYURETHANE HARD SEGMENTS BASED ON A NEW WATERBORNE CHAIN EXTENDER DIMETHYLOL BUTANOIC ACID (DMBA)*

Papers | Updated：2021-06-21

- FTIR STUDIES ON THE MODEL POLYURETHANE HARD SEGMENTS BASED ON A NEW WATERBORNE CHAIN EXTENDER DIMETHYLOL BUTANOIC ACID (DMBA)*
- Vol. 22, Issue 3, Pages: 225-230(2004)
- Affiliations：
- Author bio：
- Funds：
- DOI：
  CLC：
- Published：20 June 2004
- Accepted：
Scan QR Code
FTIR STUDIES ON THE MODEL POLYURETHANE HARD SEGMENTS BASED ON A NEW WATERBORNE CHAIN EXTENDER DIMETHYLOL BUTANOIC ACID (DMBA)*[J]. 2004, 22(3): 225-230.
DOI：

FTIR STUDIES ON THE MODEL POLYURETHANE HARD SEGMENTS BASED ON A NEW WATERBORNE CHAIN EXTENDER DIMETHYLOL BUTANOIC ACID (DMBA)*[J]. 2004, 22(3): 225-230. DOI：

摘要

Three model polyurethane hard segments based on dimethylol butanoic acid (DMBA) and 1

6-hexane diisocyanate(HDI)

toluene diisocyanate (TDI) and 4

4'-diphenylmethane diisocyanate (MDI) were prepared by the solution method.Fourier Infrared (FTIR) spectroscopy was employed to study the H-bonds in these model polyurethanes. The model polyurethane hard segment prepared from HDI and 1

4-butanodiol (BDO) was used for comparison. It was found that the incorporation of the pendent carboxyl through DMBA into the model hard segments weakens the original NH…O = C H-bond but gives more H-bond patterns based on the two H-bond donors

urethane NH and carboxylic OH. The carboxylic dimer is one of the main H-bond types and is stronger than another main H-bond type NH…O=C. In addition

the H-bond in aromatic model hard segments is stronger than that of aliphatic hard segments. The appearance of the free C=O and the fact that almost all N—H is H-bonded suggest that there possibly exist either the third H-bond acceptor or the H-bond formed by one acceptor with two donors.

Abstract

Three model polyurethane hard segments based on dimethylol butanoic acid (DMBA) and 1

6-hexane diisocyanate(HDI)

toluene diisocyanate (TDI) and 4

urethane NH and carboxylic OH. The carboxylic dimer is one of the main H-bond types and is stronger than another main H-bond type NH…O=C. In addition

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Sliding Dynamics of Ring Chain on a Rod-Coil Block Copolymer in Rotaxane

From Molecular Defect to Macroscopic Performance: Manipulating Dichroism and Mechanics in Iodine-doped Poly(vinyl alcohol) via Ethylene Incorporation

Topology-regulated Co-assembly of Single Chain Polymer Nanoparticles and Block Copolymers into Hierarchical Micelle@Vesicle Composite Structures

Alternating Poly(ether-alt-ester)s with High Glass Transition Temperature Enabled by Rotationally Constrained Biaryl Units

Pyrimidoisoindigo-based Polymers for Ambipolar Charge Transport

Related Author

No data

Related Institution

No data

⁰