SYNTHESIS AND CHARACTERIZATION OF HIGHLY ORGANO-SOLUBLE POLYIMIDES BASED ON ALICYCLIC 1,8-DIMETHYL-BICYCLO[2.2.2]OCT-7-ENE-2,3,5,6-TETRACARBOXYLIC DIANHYDRIDE AND AROMATIC DIAMINES

Jin-gang  Liu; Gui-long  Wu; Zuo-bang  Li; Hong-shen  Li; Lin  Fan; Shi-yong  Yang

Your Location：

Home >

Browse articles >

SYNTHESIS AND CHARACTERIZATION OF HIGHLY ORGANO-SOLUBLE POLYIMIDES BASED ON ALICYCLIC 1,8-DIMETHYL-BICYCLO[2.2.2]OCT-7-ENE-2,3,5,6-TETRACARBOXYLIC DIANHYDRIDE AND AROMATIC DIAMINES

Papers | Updated：2021-06-21

- SYNTHESIS AND CHARACTERIZATION OF HIGHLY ORGANO-SOLUBLE POLYIMIDES BASED ON ALICYCLIC 1,8-DIMETHYL-BICYCLO[2.2.2]OCT-7-ENE-2,3,5,6-TETRACARBOXYLIC DIANHYDRIDE AND AROMATIC DIAMINES
- Vol. 22, Issue 6, Pages: 511-519(2004)
- Affiliations：
- Author bio：
- Funds：
- DOI：
  CLC：
- Published：20 December 2004
- Accepted：
Scan QR Code
Jin-gang Liu, Gui-long Wu, Zuo-bang Li, et al. SYNTHESIS AND CHARACTERIZATION OF HIGHLY ORGANO-SOLUBLE POLYIMIDES BASED ON ALICYCLIC 1,8-DIMETHYL-BICYCLO[2.2.2]OCT-7-ENE-2,3,5,6-TETRACARBOXYLIC DIANHYDRIDE AND AROMATIC DIAMINES[J]. 2004, 22(6): 511-519.
DOI：

Jin-gang Liu, Gui-long Wu, Zuo-bang Li, et al. SYNTHESIS AND CHARACTERIZATION OF HIGHLY ORGANO-SOLUBLE POLYIMIDES BASED ON ALICYCLIC 1,8-DIMETHYL-BICYCLO[2.2.2]OCT-7-ENE-2,3,5,6-TETRACARBOXYLIC DIANHYDRIDE AND AROMATIC DIAMINES[J]. 2004, 22(6): 511-519. DOI：

摘要

Organo-soluble alicyclic polyimides (ALPIs) were synthesized from an alicyclic dianhydride

8-dimethyl- bicyclo[2.2.2]oct-7-ene-2

6-tetracarboxylic dianhydride (DMEA) and several multialkyl-substituted 4

4?-diaminodiphenylmethane compounds

including 3

3?-dimethyl-4

4?-diaminodiphenyl methane (DMDA)

5?-tetra-methyl-4

4?-diaminodiphenyl methane (TMDA) and 3

5?-tetraethyl-4

4?-diaminodiphenylmethane (TEDA). For comparison

the aromatic polyimides (ARPIs) were synthesized from the aromatic dianhydride

4?-benzo-phenonetetracarboxylic dianhydride (BTDA) and the same diamines. The ALPIs exhibited better solubility and transparency

but worse thermal stabilities and mechanical properties than those of the ARPIs. And the ALPIs could be dissolved in common organic solvents

such as N-methyl-2-pyrrolidinone (NMP)

N-dimethylformamide (DMF)

N-dimethylacetamide (DMAc)

chloroform

tetrahydrofuran

m-cresol and so on. The ALPI films had an UV-Vis cut-off at 320 nm and a transmittance of higher than 80% in the visible region. In addition

the ALPIs showed thermal decomposition temperatures (Td) of about 450℃

which was nearly 100℃ lower than that of the ARPIs.

Abstract

Organo-soluble alicyclic polyimides (ALPIs) were synthesized from an alicyclic dianhydride

8-dimethyl- bicyclo[2.2.2]oct-7-ene-2

6-tetracarboxylic dianhydride (DMEA) and several multialkyl-substituted 4

4?-diaminodiphenylmethane compounds

including 3

3?-dimethyl-4

4?-diaminodiphenyl methane (DMDA)

5?-tetra-methyl-4

4?-diaminodiphenyl methane (TMDA) and 3

5?-tetraethyl-4

4?-diaminodiphenylmethane (TEDA). For comparison

the aromatic polyimides (ARPIs) were synthesized from the aromatic dianhydride

4?-benzo-phenonetetracarboxylic dianhydride (BTDA) and the same diamines. The ALPIs exhibited better solubility and transparency

but worse thermal stabilities and mechanical properties than those of the ARPIs. And the ALPIs could be dissolved in common organic solvents

such as N-methyl-2-pyrrolidinone (NMP)

N-dimethylformamide (DMF)

N-dimethylacetamide (DMAc)

chloroform

tetrahydrofuran

m-cresol and so on. The ALPI films had an UV-Vis cut-off at 320 nm and a transmittance of higher than 80% in the visible region. In addition

the ALPIs showed thermal decomposition temperatures (Td) of about 450℃

which was nearly 100℃ lower than that of the ARPIs.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Porous Organic Polymers for Photocatalytic Hydrogen Peroxide Production: Recent Advances and Future Perspectives

Bioinspired Zinc-doped Nano Hydroxyapatite Reinforced Poly(lactic acid) Composites for Bone Repair

Preparation and Chiral Recognition Ability of Crystalline Cellulose Phenylcarbamate

Experimental Investigation of Graphene and TiO2 Reinforced Poly(vinyl alcohol)-based Fiber Metal Laminates

From Molecular Defect to Macroscopic Performance: Manipulating Dichroism and Mechanics in Iodine-doped Poly(vinyl alcohol) via Ethylene Incorporation

Related Author

No data

Related Institution

No data

⁰