PREPARATION AND CHARACTERIZATION OF POLYAMIDE 11/CLAY NANOCOMPOSITES*

Your Location：

Home >

Browse articles >

PREPARATION AND CHARACTERIZATION OF POLYAMIDE 11/CLAY NANOCOMPOSITES*

Papers | Updated：2021-06-21

- PREPARATION AND CHARACTERIZATION OF POLYAMIDE 11/CLAY NANOCOMPOSITES*
- Vol. 22, Issue 1, Pages: 43-47(2004)
- Affiliations：
- Author bio：
- Funds：
- DOI：
  CLC：
- Published：20 February 2004
- Accepted：
Scan QR Code
PREPARATION AND CHARACTERIZATION OF POLYAMIDE 11/CLAY NANOCOMPOSITES*[J]. 2004, 22(1): 43-47.
DOI：

PREPARATION AND CHARACTERIZATION OF POLYAMIDE 11/CLAY NANOCOMPOSITES*[J]. 2004, 22(1): 43-47. DOI：

摘要

Polyamide 11 (PA 11) is a widely used polyamide resin

but its application is limited since the impact properties

tensile strength

and thermal properties are not very satisfactory for industrial application. In order to improve the mechanical properties of PA 11

in this paper

the preparation of polyamide 11/clay nanocomposites (PACN) via in-situ intercalated polymerization was reported. SEM

TEM and XRD were employed to investigate the dispersion of clay sheet in the matrix. The results indicate that clay layers were homogeneously dispersed in PA11 matrix on a nano-scale

and an exfoliated and intercalated structure co-existed in the composites. The mechanical and thermal properties of the obtained nanocomposites were improved to certain extent by the addition of clay.

Abstract

Polyamide 11 (PA 11) is a widely used polyamide resin

but its application is limited since the impact properties

tensile strength

and thermal properties are not very satisfactory for industrial application. In order to improve the mechanical properties of PA 11

in this paper

the preparation of polyamide 11/clay nanocomposites (PACN) via in-situ intercalated polymerization was reported. SEM

TEM and XRD were employed to investigate the dispersion of clay sheet in the matrix. The results indicate that clay layers were homogeneously dispersed in PA11 matrix on a nano-scale

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Multiple-Responsive Chiral Hydrogels from Helical Dendronized Poly(phenylacetylene)s

Special Topic: Chirality in Polymers

A Paradigm for BF3 Co-initiated Cationic Polymerization with Low Dispersity: Introducing Acetonitrile and Lowering the Reaction Temperature

Alternating Poly(ether-alt-ester)s with High Glass Transition Temperature Enabled by Rotationally Constrained Biaryl Units

Tunable Circularly Polarized Luminescence of Helical Poly(phenylacetylene)s via Side-chain-to-Backbone Förster Resonance Energy Transfer

Related Author

No data

Related Institution

No data

⁰