SURFACE OF GELATIN MODIFIED POLY(L-LACTIC ACID)FILM*

Your Location：

Home >

Browse articles >

SURFACE OF GELATIN MODIFIED POLY(L-LACTIC ACID)FILM*

Papers | Updated：2021-06-21

- SURFACE OF GELATIN MODIFIED POLY(L-LACTIC ACID)FILM*
- Vol. 21, Issue 3, Pages: 277-283(2003)
- Affiliations：
- Author bio：
- Funds：
- DOI：
  CLC：
- Published：20 June 2003
- Accepted：
Scan QR Code
SURFACE OF GELATIN MODIFIED POLY(L-LACTIC ACID)FILM*[J]. 2003, 21(3): 277-283.
DOI：

SURFACE OF GELATIN MODIFIED POLY(L-LACTIC ACID)FILM*[J]. 2003, 21(3): 277-283. DOI：

摘要

In this paper

the surface structure of poly(L-lactic acid) (PLLA) film modified with gelatin was investigated. ThePLLA film specimens were treated directly with aqueous alkali solution to provide their surfaces with carboxyl groups

sothat these functional groups could become the reactive sites for gelatin immobilization. The functional groups of the PLLAfilms were identified by ATR-FTIR spectra and XPS spectra

the changes in surface morphology were observed by using environmental scanning electron microscopy(ESEM)

and the hydrophilicity of modified PLLA films was examined by water contact angle measurement.Experimental results showed that the gelatin was immobilized with water-soluble carbodiimide (EDC) onto the PLLA film's surfaces

and the gelatin content on the polymer surface was related to carboxylic group formed in the controlled hydrolysis process.Rough surfaces caused by hydrolysis will predominantly favor the adhesion and growth of cell;and the hydrophilicity of these surfaces after the modification procedure is enhanced.

Abstract

In this paper

sothat these functional groups could become the reactive sites for gelatin immobilization. The functional groups of the PLLAfilms were identified by ATR-FTIR spectra and XPS spectra

the changes in surface morphology were observed by using environmental scanning electron microscopy(ESEM)

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Enhanced Segment Mobility Promotes Stereocomplex Crystallization in Polymer Blends via Elevated Segmental Miscibility

Bioinspired Zinc-doped Nano Hydroxyapatite Reinforced Poly(lactic acid) Composites for Bone Repair

Epoxy-functionalized Cyclohexane-based Ricinoleate Plasticizer: Synthesis, Performance Evaluation, and Plasticizing Mechanism

Sliding Dynamics of Ring Chain on a Rod-Coil Block Copolymer in Rotaxane

Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers

Related Author

No data

Related Institution

No data

⁰