SYNTHESIS AND CHARACTERIZATION OF ORGANOMONTMORILLONITE AND POLYAMIDE 66/MONTMORILLONITE NANOCOMPOSITES*

Your Location：

Home >

Browse articles >

SYNTHESIS AND CHARACTERIZATION OF ORGANOMONTMORILLONITE AND POLYAMIDE 66/MONTMORILLONITE NANOCOMPOSITES*

Papers | Updated：2021-06-21

- SYNTHESIS AND CHARACTERIZATION OF ORGANOMONTMORILLONITE AND POLYAMIDE 66/MONTMORILLONITE NANOCOMPOSITES*
- Vol. 20, Issue 6, Pages: 551-557(2002)
- Affiliations：
- Author bio：
- Funds：
- DOI：
  CLC：
- Published：20 December 2002
- Accepted：
Scan QR Code
SYNTHESIS AND CHARACTERIZATION OF ORGANOMONTMORILLONITE AND POLYAMIDE 66/MONTMORILLONITE NANOCOMPOSITES*[J]. 2002, 20(6): 551-557.
DOI：

SYNTHESIS AND CHARACTERIZATION OF ORGANOMONTMORILLONITE AND POLYAMIDE 66/MONTMORILLONITE NANOCOMPOSITES*[J]. 2002, 20(6): 551-557. DOI：

摘要

The montmorillonites (MMTs)

layered

smectite-type silicates

were premodified by two different methods priorto the polymer melt intercalation. In one case MMTs were modified with cetyltrimethylammonium bromide (CTAB)

andtermed as organomontmorillonites (OMMTs); in the other case MMTs were modified by nylon

and the products were calledmodified montmorillonites (MMMTs). The effects of CTAB and nylon on the MMTs were investigated by using TG andWAXD. The results show that interlayer spacings of CTAB and nylon modified MMTs are larger than that of sodium MMTs.Then polyamide 66 (PA 66)/MMT nanocomposites were obtained through the method of melt intercalation of polymers.The nanocomposites were characterized by WAXD

TEM and Molau experiments.The results indicate that the MMTs disperse homogeneously in the PA 66 matrix.The mechanical properties of nanocomposites

such as tensile properties and flexural properties

were also measured and show a tendency to increase with increase of MMT content and reach the maximum values at 5phr MMT content.The heat distortion temperature (HDT) of the nanocomposites(7 phr) is about 32 K higher than that of pure PA 66.

Abstract

The montmorillonites (MMTs)

layered

smectite-type silicates

were premodified by two different methods priorto the polymer melt intercalation. In one case MMTs were modified with cetyltrimethylammonium bromide (CTAB)

andtermed as organomontmorillonites (OMMTs); in the other case MMTs were modified by nylon

TEM and Molau experiments.The results indicate that the MMTs disperse homogeneously in the PA 66 matrix.The mechanical properties of nanocomposites

such as tensile properties and flexural properties

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

End-group and Side-chain Dual-engineering of Selenium-fused Acceptors for 20.08% Efficiency Polymer Solar Cells with Low Energy Loss

Two-way Shape Memory Effect of Polycaprolactone-based Polyurethane via Synergistic Role of Hydrogen Bonding and Crystallization Tuned by Malic Acid

Tunable Circularly Polarized Luminescence of Helical Poly(phenylacetylene)s via Side-chain-to-Backbone Förster Resonance Energy Transfer

Topology-regulated Co-assembly of Single Chain Polymer Nanoparticles and Block Copolymers into Hierarchical Micelle@Vesicle Composite Structures

Circularly Polarized Luminescence Based on Helical Polymers: Structure-Property Relationships and Regulation Mechanisms

Related Author

No data

Related Institution

No data

⁰