The glassy transition of the polyethylene terephthalate (PET) sampleswhich have been subjected to solvent induced crystallization (SINC) was investigated bymodulated differential scanning calorimetry (MDSC) and density measurement. The dif-ferential of heat capacity signal
d Cp/dT from MDSC
was used to monitor the SINCprocess. It reveals that the Tg temperature shifts to higher value with the advancement ofSINC. When the toluene-immersing time was longer (168h)
the detection of T_g becomemore difficult
because some smaller peaks emerged at the lower temperatures and these are explained as the movement of small segments in the amorphous region.These observed results are due to the morphology and structure introduced by the SINC process.
Abstract
The glassy transition of the polyethylene terephthalate (PET) sampleswhich have been subjected to solvent induced crystallization (SINC) was investigated bymodulated differential scanning calorimetry (MDSC) and density measurement. The dif-ferential of heat capacity signal
d Cp/dT from MDSC
was used to monitor the SINCprocess. It reveals that the Tg temperature shifts to higher value with the advancement ofSINC. When the toluene-immersing time was longer (168h)
the detection of T_g becomemore difficult
because some smaller peaks emerged at the lower temperatures and these are explained as the movement of small segments in the amorphous region.These observed results are due to the morphology and structure introduced by the SINC process.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.