A STUDY ON MECHANICAL PROPERTIES OF γ-RAY IRRADIATED HDPE FILLED WITH SERICITE-TRIDYMITE-CRISTOBALITE*
Papers|Updated:2021-06-21
|
A STUDY ON MECHANICAL PROPERTIES OF γ-RAY IRRADIATED HDPE FILLED WITH SERICITE-TRIDYMITE-CRISTOBALITE*
Vol. 16, Issue 4, Pages: 339-344(1998)
Affiliations:
Author bio:
Funds:
DOI:
CLC:
Published:20 December 1998
Accepted:
Scan QR Code
XU Wen, XIAO Wangdong, XU Xi. A STUDY ON MECHANICAL PROPERTIES OF γ-RAY IRRADIATED HDPE FILLED WITH SERICITE-TRIDYMITE-CRISTOBALITE*[J]. 1998, 16(4): 339-344.
DOI:
XU Wen, XIAO Wangdong, XU Xi. A STUDY ON MECHANICAL PROPERTIES OF γ-RAY IRRADIATED HDPE FILLED WITH SERICITE-TRIDYMITE-CRISTOBALITE*[J]. 1998, 16(4): 339-344.DOI:
A STUDY ON MECHANICAL PROPERTIES OF γ-RAY IRRADIATED HDPE FILLED WITH SERICITE-TRIDYMITE-CRISTOBALITE*
The effect of γ-ray irradiation on the mechanical properties of high densitypolyethylene(HDPE) filled with sericite-tridymite-cristobalite(STC) was studied. The ex-perimental results show that γ-ray irradiation can improve the affinity between HDPE andSTC
and the dispersion of STC in HDPE matrix. Compared with HDPE/STC (80/20)blend
the yield stress and impact strength of irradiated HDPE (10kGy)/STC (80/20) blendare increased from 22.8 MPa and 70J/m to 28.5 MPa and 144J/m. The yield stress andimpact strength of HDPE/irradiated HDPE/STC (48/32/20) are 27.8MPa and 210J/m
respectively.
Abstract
The effect of γ-ray irradiation on the mechanical properties of high densitypolyethylene(HDPE) filled with sericite-tridymite-cristobalite(STC) was studied. The ex-perimental results show that γ-ray irradiation can improve the affinity between HDPE andSTC
and the dispersion of STC in HDPE matrix. Compared with HDPE/STC (80/20)blend
the yield stress and impact strength of irradiated HDPE (10kGy)/STC (80/20) blendare increased from 22.8 MPa and 70J/m to 28.5 MPa and 144J/m. The yield stress andimpact strength of HDPE/irradiated HDPE/STC (48/32/20) are 27.8MPa and 210J/m
respectively.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers
Molecular Segregation and Melt Memory in Dilute Polycaprolactone with Reduced Entanglements
End-to-End Neuron-inspired Signal Transduction Using Organic Electrochemical Transistors
Enhancing Processability of Phenylethynyl-terminated Imide Oligomers and Properties of Cured Polyimides via ―CF3 Incorporation