A STUDY ON THE STRUCTURE AND PROPERTIES OF POLYBUTYLALDEHYDE FORMED IN LOW TEMPERATURE PLASMA*

LIU Xueshu; YAO Yaoguang; ZHU Yufen; ZHANG Guanghua; LIU Qian

Your Location：

Home >

Browse articles >

A STUDY ON THE STRUCTURE AND PROPERTIES OF POLYBUTYLALDEHYDE FORMED IN LOW TEMPERATURE PLASMA*

Papers | Updated：2021-06-21

- A STUDY ON THE STRUCTURE AND PROPERTIES OF POLYBUTYLALDEHYDE FORMED IN LOW TEMPERATURE PLASMA*
- Vol. 10, Issue 3, Pages: 266-269(1992)
- Affiliations：
  
  1. Guangzhou Institute of Chemistry, Academia Sinica,Guangzhou P. O. Box 1122,510650
  2.   Academia Sinica
  3.   Guangzhou P. O. Box 1122
  4.   510650
- Author bio：
- Funds：
- DOI：
  CLC：
- Published：20 September 1992
- Accepted：
Scan QR Code
[1]刘学恕,姚广,朱育芬,张光华,刘倩.A STUDY ON THE STRUCTURE AND PROPERTIES OF POLYBUTYLALDEHYDE FORMED IN LOW TEMPERATURE PLASMA[J].Chinese Journal of Polymer Science,1992,{4}(03):266-269.

LIU Xueshu, YAO Yaoguang, ZHU Yufen, et al. A STUDY ON THE STRUCTURE AND PROPERTIES OF POLYBUTYLALDEHYDE FORMED IN LOW TEMPERATURE PLASMA*[J]. 1992, 10(3): 266-269.
[1]刘学恕,姚广,朱育芬,张光华,刘倩.A STUDY ON THE STRUCTURE AND PROPERTIES OF POLYBUTYLALDEHYDE FORMED IN LOW TEMPERATURE PLASMA[J].Chinese Journal of Polymer Science,1992,{4}(03):266-269. DOI：

LIU Xueshu, YAO Yaoguang, ZHU Yufen, et al. A STUDY ON THE STRUCTURE AND PROPERTIES OF POLYBUTYLALDEHYDE FORMED IN LOW TEMPERATURE PLASMA*[J]. 1992, 10(3): 266-269. DOI：

摘要

<正> The polybutylaldehyde obtained by plasma polymerization was investigated by means of IR

X-ray diffraction

GC-MS

elementary analysis

TEM

electron diffraction and contact angle measurements etc. The results showed that the polymer formed in plasma is amorphous crosslinked polymer

and its backbone is made of carbon atoms. The surface energy of the polymer film is independent of the polymerization conditions. No addition reaction has taken place in the carbonyl group of butylaldehyde in the plasma condition. The result of the wettability measurements showed that the polymer film is generally hydrophobic and the surface energy of the film is about 41 dyn/cm

in which the dispersion force contribution is the majority. The electron diffraction proved that some crystal substance

even the single crystals were present in the polymer. X-ray diffraction also proved the presence of crystal and showed about 15% crystaUinity fraction.

Abstract

The polybutylaldehyde obtained by plasma polymerization was investigated by means of IR

X-ray diffraction

GC-MS

elementary analysis

TEM

electron diffraction and contact angle measurements etc. The results showed that the polymer formed in plasma is amorphous crosslinked polymer

in which the dispersion force contribution is the majority. The electron diffraction proved that some crystal substance

even the single crystals were present in the polymer. X-ray diffraction also proved the presence of crystal and showed about 15% crystaUinity fraction.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Molecular Segregation and Melt Memory in Dilute Polycaprolactone with Reduced Entanglements

Enhancing Processability of Phenylethynyl-terminated Imide Oligomers and Properties of Cured Polyimides via ―CF3 Incorporation

Porous Organic Polymers for Photocatalytic Hydrogen Peroxide Production: Recent Advances and Future Perspectives

Optically Active Helical Poly(phenyl isocyanide)s Bearing Achiral Benzanilide Pendants: from Controlled Synthesis to Enantioseparation Application

Enhanced Segment Mobility Promotes Stereocomplex Crystallization in Polymer Blends via Elevated Segmental Miscibility

Related Author

No data

Related Institution

No data

⁰