EFFECT OF DISPERSION OF MICA IN MATRIX ON YOUNG'S MODULUS OF MICA FILLED POLYETHYLENE*

XU Xi; GONG Xiaoyi

Your Location：

Home >

Browse articles >

EFFECT OF DISPERSION OF MICA IN MATRIX ON YOUNG'S MODULUS OF MICA FILLED POLYETHYLENE*

Papers | Updated：2021-06-21

- EFFECT OF DISPERSION OF MICA IN MATRIX ON YOUNG'S MODULUS OF MICA FILLED POLYETHYLENE*
- Vol. 9, Issue 2, Pages: 108-112(1991)
- Affiliations：
  
  1. Polymer Research Institute, Chengdu University of Sconce and Technology, Chengdu. 610065) Guangzhou Institute of Chemistry, Academia Sinica,Guangzhou,510650
  2.   Chengdu University of Science and Technology
  3.   Chengdu 610065
  4.   Chengdu Guangzhou Institute of Chemistry  ,610065
  5.   Academia Sinica
  6.   Guangzhou 510650
- Author bio：
- Funds：
- DOI：
  CLC：
- Published：20 June 1991
- Accepted：
Scan QR Code
[1]徐僖,宫晓颐.EFFECT OF DISPERSION OF MICA IN MATRIX ON YOUNG'S MODULUS OF MICA FILLED POLYETHYLENE[J].Chinese Journal of Polymer Science,1991,{4}(02):108-112.

XU Xi, GONG Xiaoyi. EFFECT OF DISPERSION OF MICA IN MATRIX ON YOUNG'S MODULUS OF MICA FILLED POLYETHYLENE*[J]. 1991, 9(2): 108-112.
[1]徐僖,宫晓颐.EFFECT OF DISPERSION OF MICA IN MATRIX ON YOUNG'S MODULUS OF MICA FILLED POLYETHYLENE[J].Chinese Journal of Polymer Science,1991,{4}(02):108-112. DOI：

XU Xi, GONG Xiaoyi. EFFECT OF DISPERSION OF MICA IN MATRIX ON YOUNG'S MODULUS OF MICA FILLED POLYETHYLENE*[J]. 1991, 9(2): 108-112. DOI：

摘要

<正> The correlation between Young’s modulus of mica-filled high density polyethylene （HDPE）

low density polyethylene（LDPE） and the state of dispersion of plasma-treated mica in the polymer matrices was studied. The modulus and the number average diameter of mica aggregates in matrix were determined with tensile testing and image analysis respectively. The interface structure of the filler/matrix and the bulk structure of matrix were examined through the dielectric spectrometry

differential scanning calorimetry （DSC） and dynamic viscoelastic spectrometry. The results show that the Young’s modulus of the filial polyethylene depends to a great extent upon the state of dispersion of filler in matrix

but it is independent of the interface structure and bulk structure. The better the dispersion

the higher the Young’s modulus.

Abstract

The correlation between Young’s modulus of mica-filled high density polyethylene （HDPE）

but it is independent of the interface structure and bulk structure. The better the dispersion

the higher the Young’s modulus.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Manipulating Hierarchical Aggregation Structure via Film-forming Kinetics Enables Organic Photovoltaics over 20% Efficiency

Upgrading Commercially Available Polyethylene to High-value Materials with Strong Mechanical Performance and Hydrophilicity by Blending with Ethylene/meta-Methoxystyrene Copolymers

A Paradigm for BF3 Co-initiated Cationic Polymerization with Low Dispersity: Introducing Acetonitrile and Lowering the Reaction Temperature

On-demand Peelable UV-curable Adhesives with Superior Bonding Strength: Rational Molecular Engineering of Cohesion-adhesion Synergy

From Molecular Defect to Macroscopic Performance: Manipulating Dichroism and Mechanics in Iodine-doped Poly(vinyl alcohol) via Ethylene Incorporation

Related Author

No data

Related Institution

No data

⁰