SYNTHESIS OF AMPHIPHILIC COMB-SHAPED COPOLYMERS USED FOR SURFACE MODIFICATION OF PVDF MEMBRANES

Jian-hua Li a; You-yi Xu a; Jian-hua Wang a; Chun-hui Du a

Your Location：

Home >

Browse articles >

SYNTHESIS OF AMPHIPHILIC COMB-SHAPED COPOLYMERS USED FOR SURFACE MODIFICATION OF PVDF MEMBRANES

Papers | Updated：2021-06-21

- SYNTHESIS OF AMPHIPHILIC COMB-SHAPED COPOLYMERS USED FOR SURFACE MODIFICATION OF PVDF MEMBRANES
- Vol. 27, Issue 6, Pages: 821-831(2009)
- Affiliations：
- Author bio：
- Funds：
- DOI：
  CLC：
- Published：20 November 2009
- Accepted：
Scan QR Code
Jian-hua Li a, You-yi Xu a, Jian-hua Wang a, et al. SYNTHESIS OF AMPHIPHILIC COMB-SHAPED COPOLYMERS USED FOR SURFACE MODIFICATION OF PVDF MEMBRANES[J]. 2009, 27(6): 821-831.
DOI：

Jian-hua Li a, You-yi Xu a, Jian-hua Wang a, et al. SYNTHESIS OF AMPHIPHILIC COMB-SHAPED COPOLYMERS USED FOR SURFACE MODIFICATION OF PVDF MEMBRANES[J]. 2009, 27(6): 821-831. DOI：

摘要

The synthesis of a novel amphiphilic comb-shaped copolymer consisting of a main chain of styrene-(N-(4-hydroxyphenyl) maleimide) (SHMI) copolymer and poly(ethylene glycol) methyl ether methacrylate (PEGMA) side groups was achieved by atom transfer radical polymerization (ATRP). The amphiphilic copolymers were characterized by 1H-NMR

Fourier transform infrared (FTIR) spectroscopy and gel permeation chromatography (GPC). From thermogravimetric analysis (TGA)

the decomposition temperature of SHMI-g-PEGMA is lower than that of SHMI

and the graft ratio of PEGMA in the SHMI is 18.6%. The experimental results of solubilities showed that SHMI

SHMI-Br and SHMI-g-PEGMA had excellent solubility in polar solvents

such as DMF

DMSO and NMP. SHMI-g-PEGMA had higher solubilities in H2O and methanol

while lower solubility in CHCl3 than SHMI and SHMI-Br. PVDF blend membranes were prepared via the standard immersion precipitation phase inversion process

using amphiphilic SHMI-g-PEGMA copolymer as additives. The morphology and hydrophilicity of the blend membrane surfaces were characterized by SEM and water contact angle. It is demonstrated that the blend membranes display enhanced hydrophilicity compared to unmodified PVDF membranes. Finally

the permeation and anti-fouling properties were investigated. The result shows that amphiphilic SHMI-g-PEGMA copolymer increases the permeatability and anti-fouling property of PVDF membranes greatly.

Abstract

Fourier transform infrared (FTIR) spectroscopy and gel permeation chromatography (GPC). From thermogravimetric analysis (TGA)

the decomposition temperature of SHMI-g-PEGMA is lower than that of SHMI

and the graft ratio of PEGMA in the SHMI is 18.6%. The experimental results of solubilities showed that SHMI

SHMI-Br and SHMI-g-PEGMA had excellent solubility in polar solvents

such as DMF

DMSO and NMP. SHMI-g-PEGMA had higher solubilities in H2O and methanol

while lower solubility in CHCl3 than SHMI and SHMI-Br. PVDF blend membranes were prepared via the standard immersion precipitation phase inversion process

关键词

Keywords

references

Views

105

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Experimental Investigation of Graphene and TiO2 Reinforced Poly(vinyl alcohol)-based Fiber Metal Laminates

Multiple-Responsive Chiral Hydrogels from Helical Dendronized Poly(phenylacetylene)s

End-to-End Neuron-inspired Signal Transduction Using Organic Electrochemical Transistors

Molecularly Engineered Polyimide Films with Switchable Cavitation for Bidirectional Passive Thermal Regulation

Silk Sericin-inspired Poly-β-homoserine for Protein Protection

Related Author

No data

Related Institution

No data

⁰