Cracking Behavior Analysis of Thermoplastic Polyimide under Vacuum Pressure Impregnation

Chao Xiao; Xian Zhang; Long-Gui Zheng; Ye-Zheng Xiao; Yan-Lan Hu

doi:10.1007/s10118-026-3878-0

Your Location：

Home >

Browse articles >

Cracking Behavior Analysis of Thermoplastic Polyimide under Vacuum Pressure Impregnation

RESEARCH ARTICLE | Updated：2026-11-03

- Cracking Behavior Analysis of Thermoplastic Polyimide under Vacuum Pressure Impregnation
- Chinese Journal of Polymer Science Vol. 44, Pages: 1-12(2026)
- Affiliations：
  
  Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei 230031, China
- Author bio：
  
  zlonggui@ipp.ac.cn
- Funds：
- DOI：10.1007/s10118-026-3878-0
  CLC：
- Received：09 June 2026，
  
  Accepted：07 September 2026，
  
  Online First：02 November 2026，
  
  Published：2026-10
- Accepted：
Scan QR Code
Xiao, C.; Zhang, X.; Zheng, L. G.; Xiao, Y. Z.; Hu, Y. L. Cracking behavior analysis of thermoplastic polyimide under vacuum pressure impregnation. Chinese J. Polym. Sci. https://doi.org/10.1007/s10118-026-3878-0

Chao Xiao, Xian Zhang, Long-Gui Zheng, et al. Cracking Behavior Analysis of Thermoplastic Polyimide under Vacuum Pressure Impregnation[J/OL]. Chinese Journal of Polymer Science, 2026, 441-12.
Xiao, C.; Zhang, X.; Zheng, L. G.; Xiao, Y. Z.; Hu, Y. L. Cracking behavior analysis of thermoplastic polyimide under vacuum pressure impregnation. Chinese J. Polym. Sci. https://doi.org/10.1007/s10118-026-3878-0 DOI：

Chao Xiao, Xian Zhang, Long-Gui Zheng, et al. Cracking Behavior Analysis of Thermoplastic Polyimide under Vacuum Pressure Impregnation[J/OL]. Chinese Journal of Polymer Science, 2026, 441-12. DOI： 10.1007/s10118-026-3878-0.

摘要

Abstract

Thermoplastic polyimide (TPI) insulated wires

which exhibit excellent insulating and radiation-resistant properties at extremely low temperatures

are designated as connection lines for the quench detection system of superconducting magnets. However

extensive cracking was unexpectedly observed after the implementation of vacuum pressure impregnation (VPI). The cracking behavior of TPI-insulated wires during the VPI process was systematically investigated. The results reveal that the failure is a multi-factor coupled phenomenon involving synergistic interactions between thermal

mechanical

and chemical mechanisms. First

the coiled configuration imposes sustained tensile stress on the outer arc of the insulation

while the extrusion process introduces molecular orientation and residual stresses into the TPI matrix. Although the VPI temperature (130 °C

72 h) is well below the glass transition temperature (about 245 °C)

sub-

segmental relaxation and amorphous structural rearrangement occurred

leading to free volume redistribution and residual stress relaxation. The constraint of the metallic conductor further restricts dimensional recovery

thereby promoting microcrack initiation. Second

low-molecular-weight species from the epoxy system

particularly the curing agent HY918 and the accelerator DY073-1

permeate into the amorphous regions

of TPI

causing plasticization

swelling

and enhanced segmental mobility

which significantly reduces the local resistance to yielding and crack propagation. Under sustained bending stress

this results in a typical environmental stress cracking (ESC) acceleration effect. Third

the substantial mismatch in the coefficients of thermal expansion between the TPI and the metallic conductor generates considerable thermal stresses during the VPI thermal cycle

further exacerbating the cracking risk. Based on the mechanistic understanding

a protective strategy was implemented by wrapping the TPI wires with a thermal insulation layer prior to VPI. The protected specimens successfully passed the vacuum Paschen test

confirming that this approach effectively prevented resin permeation and thermally induced structural transitions in TPI insulation. This strategy provides a reference for the failures of quench diagnostic wires in similar superconducting magnets.

关键词

Keywords

references

Wu, G.; Qi S.; Tian G.; Wu D. Preparation and characterization of low cte thermoplastic copolyimide resins based on the structural design of block sequence. Eur. Polym. J. 2023 , 195 , 112249..

Cao, X.; Yang S.; Huang Q.; Pan Z.; Xie Y.; Tong Y.; He K. Thermoplastic polyimides with enhanced processability and thermal stability via molecular structure modulation. Polym. Eng. Sci. 2025 , 65 , 5389−5401..

Hall, M. A.; Lewis, B.; Shull, K. R. Thermomechanical characterization of high Tg disulfide-containing thermoplastic polyimides. Macromolecules 2025 , 58 , 2065−2072..

Nazarychev, V. M.; Pavlov, A. A.; Kamalov, A. M.; Borisova, M. E.; Didenko, A. L.; Ivan'kova, E. M.; Kraft, V. E.; Vaganov, G. V.; Nikolaeva, A. L.; Ivanova, A. S.; Lavrentiev, V. K.; Popova, E. N.; Abalov, I. V.; Blokhin, A. N.; Bugrov, A. N.; Kudryavtsev, V. V. The effect of synthesis conditions and chemical structure of thermoplastic polyimides on their thermomechanical properties and short-term electrical strength. Polymers 2025 , 17 , 1385..

Gao, J.; Auchmann, B.; Hug, C.; Pautz, A.; Sanfilippo, S. Study of a current-based quench detection method for cct magnets via a co-wound superconducting sensing wire. IEEE Trans. Appl. Supercond. 2021 , 31 , 4701105..

Miyoshi, Y.; Bruton, A.; Cormany, C.; Liao, M.; Mitchell, N.; Schild, T.; Barden, R.; Everitt, D.; Freudenberg, K.; Guilliams, V.; Hughes, D.; Martovetsky, N.; Rossano, G.; Vandergriff, D.; Wooley, K.; Khumthong, K.; Norausky, N.; Ortiz, E.; Sheeron, J.; Smith, J. Selected topics of technical challenges of the ITER central solenoid. IEEE Trans. Appl. Supercond. 2024 , 34 , 4205405..

Piccin, R.; Rigaud, J. S.; Santillana, I. A.; Buchanan, K. E.; Ternova, D.; Mitchell, N.; Liao, M.; Luongo, C. Environmental stress cracking of thermoplastic polyimide insulated wires. IEEE Trans. Appl. Supercond. 2024 , 34 , 7700405..

Goodwin, A. A.; Whittaker, A. K.; Jack, K. S.; Hay, J. N.; Forsythe, J. Absorption of low molecular weight penetrants by a thermoplastic polyimide. Polymer 2000 , 41 , 7263−7271..

Clayton, N.; Evans, D.; Gung, C. Y.; Pastor, O.; Piccin, R.; Cerignat, S.; Huang, X.; Li, G.; Crouchen, M. Extraction of instrumentation wires through the high-voltage insulation of the ITER magnet feeder system. IOP Conf. Ser. Mater. Sci. Eng. 2019 , 502 , 012185..

Rudeiros Fernández, J. L.; Navarro, C.; Arbelaez, D.; Ferracin, P.; Prestemon, S.; Shen, T.; Vallon e, G. Interface characterization for superconducting magnets. IEEE Trans. Appl. Supercond. 2024 , 34 , 4703105..

Hsieh, A. J.; Desper, C. R.; Schneider, N. S. Transient crystallization of an aromatic polyetherimide: effect of annealing. Polymer 1992 , 33 , 306−313..

Sung Chun, Y.; Weiss, R. A. Thermal behavior of poly(ether ketone ketone)/thermoplastic polyimide blends. J. Appl. Polym. Sci. 2004 , 94 , 1227−1235..

Zi, Y. C.; Wu, G. J.; Pei, D. X.; Guo, S.; Qi, S. L.; Tian, G. F.; Wu, D. Z. Decreasing the CTE of thermoplastic polyimide by blending with a thermosetting system. Chinese J. Polym. Sci. 2023 , 41 , 956−961..

Huo, P. P.; Friler, J. B.; Cebe, P. NEW-TPI thermoplastic polyimide: thermal analysis and small-angle X-ray scattering. Polymer 1993 , 34 , 4387−4398..

Hsiao, B. S.; Sauer, B. B.; Biswas, A. Crystallization study of a thermoplastic polyimide (new-TPI). J. Polym. Sci. Part B Polym. Phys. 1994 , 32 , 737−747..

He, J.; Niu, X.; Chen, W.; Chen, W.; Yu, Y.; Fan, H. Preparation and properties of soluble thermoplastic polyimides with phenol side-groups for flexible copper clad laminates. High Perform. Polym. 2025 , 37 , 271−285..

Robertson, C. G.; Monat, J. E.; Wilkes, G. L. Physical aging of an amorphous polyimide: enthalpy relaxation and mechanical property changes. J. Polym. Sci. B Polym. Phys. 1999 , 37 , 1931−1946..

Arnold, F. E. Jr, Bruno, K. R.; Shen, D.; Eashoo, M.; Lee, C. J.; Harris, F. W.; Cheng, S. Z. D. The origin of β relaxations in segmented rigid-rod polyimide and copolyimide films. Polym. Eng. Sci. 1993 , 33 , 1373−1380..

Ree, M.; Swanson, S.; Volksen, W. Effect of precursor history on residual stress and relaxation behaviour of high temperature polyimides. Polymer 1993 , 34 , 1423−1430..

Gautreaux, C. R.; Pratt, J. R.; St Clair, T. L. A study of crystalline transitions in a thermoplastic polyimide. J. Polym. Sci. Part B Polym. Phys. 1992 , 30 , 71−82..

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Structural Regulation and High-temperature Thermo-oxidative Aging Behavior of Quartz Fiber/Thermoplastic Polyimide Composites

Decreasing the CTE of Thermoplastic Polyimide by Blending with a Thermosetting System

Pyrimidoisoindigo-based Polymers for Ambipolar Charge Transport

Special Topic: Chirality in Polymers

Sequence-encoded Conformation Pathways in Viscoelastic Microphase Separation of Multiblock Copolymers

Related Author

Bin Wang

Yi Zhang

Ruo-Peng Liu

Si-Wei Liu

Run-Xin Bei

Xin-Zheng Huang

Ye Zhang

Guo-Shan He

Related Institution

PCFM Lab, GD HPPC Lab, Guangdong Engineering Technology Research Centre for High-performance Organic and Polymer Photoelectric Functional Films, GBRCE for Functional Molecular Engineering, State Key Laboratory of Optoelectronic Materials and Technologies, School of Chemistry, IGCME, Sun Yat-sen University

Kuang-Chi Institute of Advanced Technology

Wuxi Shunxuan New Materials Co., Ltd.

Instrumental Analysis & Research Center, Sun Yat-sen University

Guangzhou Quality Testing and Inspection Institute

⁰