Pendant Y-series Acceptors with Well-controlled Morphology Enabled High Performance and Stability All-polymer Solar Cells

Hao-Yong Shi; Lu Xing; Ming-Xia Chen; Zhi-Yi Chen; Ming-Wei Deng; Lin-Yong Xu; Xiao-Hei Wu; Xin-Rong Yang; Yi-Ming Shao; Elizaveta D. Papkovskaya; Yuriy Luponosov; Rui Sun; Jie Min

doi:10.1007/s10118-025-3367-x

Your Location：

Home >

Browse articles >

Pendant Y-series Acceptors with Well-controlled Morphology Enabled High Performance and Stability All-polymer Solar Cells

RESEARCH ARTICLE | Updated：2025-07-10

- Pendant Y-series Acceptors with Well-controlled Morphology Enabled High Performance and Stability All-polymer Solar Cells
- Chinese Journal of Polymer Science Vol. 43, Pages: 1-11(2025)
- Affiliations：
  
  a.The Institute for Advanced Studies, Wuhan University, Wuhan 430072, China
  b.Enikolopov Institute of Synthetic Polymeric Materials of the Russian Academy of Sciences, Moscow 117393, Russia
- Author bio：
  
  sun.rui@whu.edu.cn (R.S.)
  min.jie@whu.edu.cn (J.M.)
- Funds：
- DOI：10.1007/s10118-025-3367-x
  CLC：
- Received：06 March 2025，
  
  Revised：24 April 2025，
  
  Accepted：27 April 2025，
  
  Published Online：10 July 2025，
  
  Published：2025-05
- Accepted：
Scan QR Code
Shi, H. Y.; Xing, L.; Chen, M. X.; Chen, Z. Y.; Deng, M. W.; Xu, L. Y.; Wu, X. H.; Yang, X. R.; Shao, Y. M.; Papkovskaya, E. D.; Luponosov, Y.; Sun, R.; Min, J. Pendant y-series acceptors with well-controlled morphology enabled high performance and stability all-polymer solar cells. Chinese J. Polym. Sci. https://doi.org/10.1007/s10118-025-3367-x

Hao-Yong Shi, Lu Xing, Ming-Xia Chen, et al. Pendant Y-series Acceptors with Well-controlled Morphology Enabled High Performance and Stability All-polymer Solar Cells[J/OL]. Chinese journal of polymer science, 2025, 431-11.
Shi, H. Y.; Xing, L.; Chen, M. X.; Chen, Z. Y.; Deng, M. W.; Xu, L. Y.; Wu, X. H.; Yang, X. R.; Shao, Y. M.; Papkovskaya, E. D.; Luponosov, Y.; Sun, R.; Min, J. Pendant y-series acceptors with well-controlled morphology enabled high performance and stability all-polymer solar cells. Chinese J. Polym. Sci. https://doi.org/10.1007/s10118-025-3367-x DOI：

Hao-Yong Shi, Lu Xing, Ming-Xia Chen, et al. Pendant Y-series Acceptors with Well-controlled Morphology Enabled High Performance and Stability All-polymer Solar Cells[J/OL]. Chinese journal of polymer science, 2025, 431-11. DOI： 10.1007/s10118-025-3367-x.

摘要

Abstract

Polymer acceptor configuration and aggregation behavior are

critical in determining the photovoltaic performance of all-polymer solar cells (all-PSCs). Effectively manipulating polymer self-aggregation through structural design to optimize the blend morphology remains challenging. Herein

we present a simple yet effective design strategy to modulate the aggregation behavior of the Y-series-based polymer acceptor PY-V-

by introducing a pendant-fluorinated Y-series acceptor (Y2F-ET) into the main-conjugated backbone. Two random copolymer acceptors (PY-EY-5 and PY-EY-20) were synthesized with varying molar fractions of Y2F-ET pendant monomers. Our findings revealed that both the solution-phase and solid-state aggregation behaviors were progressively suppressed as the Y2F-ET content increased. Compared to the highly self-aggregating PY-V-

-based all-PSCs

the more amorphous PY-EY-5 enabled devices to achieve an increased device efficiency from 17.31% to 18.45%

which is attributed to the slightly smaller polymer phase-separation domain sizes and reduced molecular aggregation in the PM6:PY-EY-5 blend. Moreover

the finely tuned blend morphology exhibited superior thermal stability

underscoring the significant advantages of the Y-series pendant random copolymerization approach.

关键词

Keywords

references

Zhao, R. Y.; Liu, J.; Wang, L. X. Polymer acceptors containing B←N units for organic photovoltaics. Acc. Chem. Res. 2020 , 53 , 1557−1567..

Zhang, Z. G.; and Li, Y. Polymerized small molecule acceptors for high performance all-polymer solar cells. Angew. Chem. Int. Ed. 2020 , 60 , 4422..

Kang, H.; Lee, W.; Oh, J.; Kim, T.; Lee, C.; and Kim, B.J. From fullerene-polymer to all-polymer solar cells: the importance of molecular packing, orientation, and morphology control. Acc. Chem. Res. 2016 , 49 , 2424..

Zhang, Z.G.; Yang, Y.; Yao, J.; Xue, L.; Chen, S.; Li, X.; Morrison, W.; Yang, C.; and Li, Y. Constructing a strongly absorbing low-bandgap polymer acceptor for high-performance all-polymer solar cells. Angew. Chem. Int. Ed. 2017 , 56 , 13503−13507..

Wang, W.; Wu, Q.; Sun, R.; Guo, J.; Wu, Y.; Shi, M .; Yang, W.; Li, H.; and Min, J. Controlling molecular mass of low-band-gap polymer acceptors for high-performance all-polymer solar cells. Joule 2020 , 4 , 1070−1086..

Luo, Z.; Liu, T.; Ma, R.; Xiao, Y.; Zhan, L.; Zhang, G.; Sun, H.; Ni, F.; Chai, G.; Wang, J.; Zhong, C.; Zou, Y.; Guo, X.; Lu, X.; Chen, H.; Yan, H.; and Yang, C. Precisely controlling the position of bromine on the end group enables well-regular polymer acceptors for all-polymer solar cells with efficiencies over 15. Adv. Mater. 2020 , 32 , 2005942..

Yu, H.; Pan, M.; Sun, R.; Agunawela, I.; Zhang, J.; Li, Y.; Qi, Z.; Han, H.; Zou, X.; Zhou, W.; et al. Regio-regular polymer acceptors enabled by determined fluorination on end groups for all-polymer solar cells with 15.2% efficiency. Angew. Chem. Int. Ed. 2021 , 60 , 10137..

Wu, X.; Xiao, B.; Sun, R.; Yang, X.; Zhang, M.; Gao, Y.; Xiao, B.; Papkovskaya, E. D.; Luponosov, Y.; Brabec, C. J.; Min, J. 19.46%-Efficiency all-polymer organic solar cells with excellent outdoor operating stability enabled by active layer reconstruction. Energy Environ. Sci. 2025 , 18 , 1812−1823..

Yu, H.; Wang, Y.; Kim, H. K.; Wu, X.; Li, Y. H.; Yao, Z. F.; Pan, M. G.; Zou, X. H.; Zhang, J. Q.; Chen, S. S .; Zhao, D. H.; Huang, F.; Lu, X. H.; Zhu, Z. L.; Yan, H. A vinylene-linker-based polymer acceptor featuring a coplanar and rigid molecular conformation enables high-performance all-polymer solar cells with over 17% efficiency. Adv. Mater. 2022 , 34 , 2200361..

Wang, T.; Sun, R.; Wu, Y.; Wang, W.; Zhang, M.; Min, J. Constructing a double-cable polymer acceptor for efficient all-polymer solar cells with a non-radiative recombination energy loss of 0.16 eV. Chem. Mater. 2022 , 34 , 9970..

Genene, Z.; Lee, J.W.; Lee, S.W.; Chen, Q.; Tan, Z.; Abdulahi, B.A.; Yu, D.; Kim, T.S.; Kim, B.J.; Wang, E. Polymer acceptors with flexible spacers afford efficient and mechanically robust all-polymer solar cells. Adv. Mater. 2022 , 34 , 2107361..

Lee, C.; Lee, S.; Kim, G. U.; Lee, W.; Kim, B. J. Recent advances, design guidelines, and prospects of all-polymer solar cells. Chem. Rev. 2019 , 119 , 8028..

Xiao, H.; Yu, L.; Zhang, Z.; Liang, H.; Shi, Y.; Guo, X.; Zhang, M.; Li, Y. An asymmetric non-fused electron-deficient building block for low-cost polymer acceptor in all-polymer solar cells. Sci. China Chem. 2023 , 66 , 2626−2633..

Li, T. F.; Wu, Q.; Yao, Z. F.; Bai, H. R.; Su, W. Y.; Sun, R.; Tang, L. X.; Bi, Z. Z.; Li, X. J.; Zhu, W. G.; Min, J.; Fan, Q. P.; Ma, W. Trialkylsilyl-thiophene-conjugated acceptor for efficient organic solar cells compatible with spin-coating and blade-coating technologies. Sci. China Chem. 2024 , 67 , 4184−4193..

Gong, Y.; Zou, T.; Li, X.; Zhuo, H.; Qin, S.; Sun, G.; Meng, L.; Li, Y. Introducing alkoxy groups as outer side chains and substituents of π -bridges obtains high-performance medium-bandgap polymerized small molecule acceptors. Sci. China Chem. 2023 , 66 , 2912−2920..

Jiang, H.; Lu, H.; Liang, Z.; Li, Y.; Ran, G.; Han, C.; Liu, Y.; Li, H.; Bao, X.; Bo, Z. Simultaneously optimizing exciton diffusion length and nonradiative energy loss in organic solar cells via ternary strategy. Sci. China Chem. 2024 , 67 , 3004−3011..

Fu, H. T.; Peng, Z. X.; Fan, Q. P.; Lin, F. R.; Qi, F.; Ran, Y. X.; Wu, Z. A.; Fan, B. B.; Jiang, K.; Woo, H. Y.; Lu, G. H.; Ade, H.; Jen, A. K. Y. A top-down strategy to engineer active layer morphology for highly efficient and stable all-polymer solar cells. Adv. Mater. 2022 , 34 , 2202608..

Zhou, K. K.; Xian, K. H.; Ye, L. Morphology control in high-efficiency all-polymer solar cells. InfoMat 2022 , 4 , e12270..

Zhang, Y.; Wu, B. Q.; He, Y. K.; Deng, W. Y.; Li, J. W.; Li, J. Y.; Qiao, N.; Xing, Y. F.; Yuan, X. Y.; Li, N.; Brabec, C. J.; Wu, H. B.; Lu, G. H.; Duan, C. H.; Huang, F.; Cao, Y. Layer-by-layer processed binary all-polymer solar cells with efficiency over 16% enabled by finely optimized morphology. Nano Energy 2022 , 93 , 106858..

Schneider, S. A.; Gu, K. L.; Yan, H. P.; Abdelsamie, M.; Bao, Z. N.; Toney, M. F. Controlling polymer morphology in blade-coated all-polymer solar cells. Chem. Mater. 2021 , 33 , 5951−5961..

Li, X. J.; Sun, G. P.; Gong, Y. F.; Li, Y. F. Recent research process of n-type conjugated polymer acceptors and all-polymer solar cells. Chinese J. Polym. Sci. 2023 , 41 , 640−651..

Zhang, J. B.; Huang, Q. R.; Zhang, K.; Jia, T.; Jing, J. H.; Chen, Y. T.; Li, Y. H.; Chen, Y. W.; Lu, X. H.; Wu, H. B.; Huang, F.; Cao, Y. Random copolymerization strategy for non-halogenated solvent-processed all-polymer solar cells with a high efficienc y of over 17%. Energy Environ. Sci. 2022 , 15 , 4561−4571..

Wu, Y.; Wu, Q.; Wang, W.; Sun, R.; Min, J. Highly efficient all-polymer solar cells enabled by random ternary copolymer acceptors with high tolerance on molar ratios. Sol. RRL 2020 , 4 , 2000409..

Fu, H. T.; Fan, Q. P.; Gao, W.; Oh, J.; Li, Y. X.; Lin, F.; Qi, F.; Yang, C.; Marks, T. J.; Jen, A. K. Y. 16.3% Efficiency binary all-polymer solar cells enabled by a novel polymer acceptor with an asymmetrical selenophene-fused backbone. Sci. China Chem . 2022 , 65, 309-317..

Du,J. Q.; Hu, K.; Zhang, J. Y.; Meng, L.; Yue, J. L.; Angunawela, I.; Yan, H. P.; Qin, S. C.; Kong, X. L.; Zhang, Z. J.; Guan, B.; Ade, H.; Li, Y. F. Polymerized small molecular acceptor based all-polymer solar cells with an efficiency of 16.16% via tuning polymer blend morphology by molecular design. Nat. Commun. 2021 , 12 , 5264..

Fan, Q. P.; Su, W. Y.; Chen, S. S.; Kim, W.; Chen, X. B.; Lee, B.; Liu, T.; Méndez-Romero, U. A.; Ma, R. J.; Yang, T.; Zhuang, W. L.; Li, Y.; Li, Y. W.; Kim, T. S.; Hou, L. T.; Yang, C.; Yan, H.; Yu, D. H.; Wang, E. G. Mechanically robust all-polymer solar cells from narrow band gap accep tors with hetero-bridging atoms. Joule 2020 , 4 , 658−672..

Sun, R.; Wang, W.; Yu, H.; Chen, Z.; Xia, X. X.; Shen, H.; Guo, J.; Shi, M. M.; Zheng, Y. N.; Wu, Y.; Yang, W. Y.; Wang, T.; Wu, Q.; Yang, Y.; Lu, X. H.; Xia, J. L.; Brabec, C. J.; Yan, H.; Li, Y. F.; Min, J. Achieving over 17% efficiency of ternary all-polymer solar cells with two well-compatible polymer acceptors. Joule 2021 , 5 , 1548−1565..

Wu, Y. L.; Schneider, S.; Walter, C.; Chowdhury, A. H.; Bahrami, B.; Wu, H. C.; Qiao, Q. Q.; Toney, M. F.; Bao, Z. N. Fine-tuning semiconducting polymer self-aggregation and crystallinity enables optimal morphology and high-performance printed all-polymer solar cells. J. Am. Chem. Soc. 2020 , 142 , 392−406..

Choi, J.; Kim, W.; Kim, S.; Kim, T. S.; Kim, B. J. Influence of acceptor type and polymer molecular weight on the mechanical properties of polymer solar cells. Chem. Mater. 2019 , 31 , 9057−9069..

Chen, S. S.; An, Y. J.; Dutta, G. K.; Kim, Y.; Zhang, Z. G.; Li, Y. F.; Yang, C. A synergetic effect of molecular weight and fluorine in all-polymer solar cells with enhanced performance. Adv. Funct. Mater. 2017 , 27 , 1603564..

Wu, Q.; Wang, W.; Chen, Z.; Xia, X. X.; Gao, M. Y.; Shen, H.; Zhu, H. M.; Lu, X. H.; Ye, L.; Xia, J. L.; Min, J. Understanding the molecular mechanisms of the differences in the efficiency and stability of all-polymer solar cells. J. Mater. Chem. C 2022 , 10 , 1850−1861..

Zhou, L. Y.; He, X.; Lau, T. K.; Qiu, B. B.; Wang, T.; Lu, X. H.; Luszczynska, B.; Ulanski, J.; Xu, S. T.; Chen, G. H.; Yuan, J.; Zhang, Z. G.; Li, Y. F.; Zou, Y. P. Nonhalogenated solvent-processed all-polymer solar cells over 7.4% efficiency from quinoxaline-based polymers. ACS Appl. Mater. Interfaces 2018 , 10 , 41318−41325..

Kataria, M.; Chau, H. D.; Kwon, N. Y.; Park, S. H.; Cho, M. J.; Choi, D. H. Y-series-based polymer acceptors for high-performance all-polymer solar cells in binary and non-binary systems. ACS Energy Lett. 2022 , 7 , 3835−3854..

Hu, K.; Zhu, C.; Ding, K.; Qin, S. C.; Lai, W. B.; Du, J. Q.; Zhang, J. Q.; Wei, Z. X.; Li, X. J.; Zhang, Z. J.; Meng, L.; Ade, H.; Li, Y. F. Solid additive tuning of polymer blend morphology enables non-halogenated-solvent all-polymer solar cells with an efficiency of over 17%. Energy Environ. Sci. 2022 , 15 , 4157−4166..

Lee, S.; Kim, Y.; Wu, Z. A.; Lee, C.; Oh, S. J.; Luan, N. T.; Lee, J.; Jeong, D.; Zhang, K.; Huang, F.; Kim, T. S.; Woo, H. Y.; Kim, B. J. Aqueous-soluble naphthalene diimide-based polymer acceptors for efficient and air-stable all-polymer solar cells. ACS Appl. Mater. Interfaces 2019 , 11 , 45038−45047..

Nam, S.; Woo, S.; Seo, J.; Kim, W. H.; Kim, H.; McNeill, C. R.; Shin, T. J.; Bradley, D. D. C.; Kim, Y. Pronounced cosolvent effects in polymer: polymer bulk heterojunction solar cells with sulfur-rich electron-donating and imide-containing electron-accepting polymers. ACS Appl. Mater. Interfaces 2015 , 7 , 15995−16002..

Qiu, W.; Liao, C.; Li, Y.; Deng, M.; Duan, Y.; Xu, X.; Peng, Q. Breaking 20% efficiency of all-polymer solar cells via benzo[1,2-d:4,5-d′ ] bisthiazole-based terpolymer donor strategy for fine morphology optimization. Adv. Funct. Mater . 2025 , 36 , 2503009.

Yang, X. R.; Sun, R.; Wang, Y. H.; Chen, M. X.; Xia, X. X.; Lu, X. H.; Lu, G. H.; Min, J. Ternary all-polymer solar cells with efficiency up to 18.14% employing a two-step sequential deposition. Adv. Mater. 2023 , 35 , 2209350..

Cai, Y. H.; Xie, C.; Li, Q.; Liu, C. H.; Gao, J. X.; Jee, M. H.; Qiao, J. W.; Li, Y.; Song, J. L.; Hao, X. T.; Woo, H. Y.; Tang, Z.; Zhou, Y. H.; Zhang, C. F.; Huang, H.; Sun, Y. M. Improved molecular ordering in a ternary blend enables all-polymer solar cells over 18% efficiency. Adv. Mater. 2023 , 35 , 2208165..

Chen, D.; Liu, S. Q.; Oh, J.; Huang, B.; Lv, R. Z.; Liu, J. B.; Yang, C.; Chen, L. Novel high-efficiency polymer acceptors via random ternary copolymerization engineering enables all-polymer solar cells with excellent performance and stability. ACS Appl. Mater. Interfaces 2021 , 13 , 17892−17901..

Sun, H. L.; Liu, T.; Yu, J. W.; Lau, T. K.; Zhang, G. Y.; Zhang, Y. J.; Su, M. Y.; Tang, Y. M.; Ma, R. J.; Liu, B.; Liang, J. E.; Feng, K.; Lu, X. H.; Guo, X. G.; Gao, F.; Yan, H. A monothiophene unit incorporating both fluoro and ester substitution enabling high-performance donor polymers for non-fullerene solar cells with 16.4% efficiency. Energy Environ. Sci. 2019 , 12 , 3328−3337..

Kim, J. Y.; Park, S.; Lee, S.; Ahn, H.; Joe, S. Y.; Kim, B. J.; Son, H. J. Low-temperature processable high-performance D–A-type random copolymers for nonfullerene polymer solar cells and application to flexible devices. Adv. Energy Mater. 2018 , 8 , 1801601..

Du, J. Q.; Hu, K.; Meng, L.; Angunawela, I.; Zhang, J. Y.; Qin, S. C.; Liebman-Pelaez, A.; Zhu, C. H.; Zhang, Z. J.; Ade, H.; Li, Y. F. High-performance all-polymer solar cells: synthesis of polymer acceptor by a random ternary copolymerization strategy. Angew. Chem. Int. Ed. 2020 , 59 , 15181−15185..

Li, Y.; Li, Q.; Cai, Y. H.; Jin, H.; Zhang, J. Q.; Tang, Z.; Zhang, C. F.; Wei, Z. X.; Sun, Y. M. An efficient polymer acceptor via a random polymerization strategy enables all-polymer solar cells with efficiency exceeding 17%. Energy Environ. Sci. 2022 , 15 , 3854−3861..

Su, W. Y.; Fan, Q. P.; Jalan, I.; Wang, Y. F.; Peng, W. H.; Guo, T.; Zhu, W. G.; Yu, D. H.; Hou, L. T.; Moons, E.; Wang, E. G. Nonconjugated terpolymer acceptors with two different fused-ring electron-deficient building blocks for efficient all-polymer solar cells. ACS Appl. Mater. Interfaces 2021 , 13 , 6442−6449..

Du, J. Q.; Hu, K.; Zhu, C.; Zhang, J. Q.; Zhang, Z. J.; Wei, Z. X.; Meng, L.; Li, Y. F. High-performance polymer acceptor synthesized by an asymmetric copolymerization strategy. Macromolecules 2022 , 55 , 7481−7487..

Ma, S. X.; Zhang, H.; Feng, K.; Guo, X. G. Polymer acceptors for high-performance all-polymer solar cells. Chem. Eur. J. 2022 , 28 , e202200222..

Wang, T.; Sun, R.; Shi, M. M.; Pan, F.; Hu, Z. C.; Huang, F.; Li, Y. F.; Min, J. Solution-processed polymer solar cells with over 17% efficiency enabled by an iridium complexation approach. Adv. Energy Mater. 2020 , 10 , 2000590..

Wang, G.; Melkonyan, F. S.; Facchetti, A.; Marks, T. J. All-polymer solar cells: recent progress, challenges, and prospects. Angew. Chem. Int. Ed. 2019 , 58 , 4129−4142..

Chen, D.; Yao, J.; Chen, L.; Yin, J. P.; Lv, R. Z.; Huang, B.; Liu, S. Q.; Zhang, Z. G.; Yang, C. H.; Chen, Y. W.; Li, Y. F. Dye-incorporated polynaphthalenediimide acceptor for additive-free high-performance all-polymer solar cells. Angew. Chem. Int. Ed . 2018, 57 , 4580..

Sun, R.; Wu, Y.; Yang, X. R.; Gao, Y.; Chen, Z.; Li, K.; Qiao, J. W.; Wang, T.; Guo, J.; Liu, C.; Hao, X. T.; Zhu, H. M.; Min, J. Single-junction organic solar cells with 19.17% efficiency enabled by introducing one asymmetric guest acceptor. Adv. Mater. 2022 , 34 , 2110147..

Sun, R.; Wang, T.; Fan, Q. P.; Wu, M. J.; Yang, X. R.; Wu, X. H.; Yu, Y.; Xia, X. X.; Cui, F. Z.; Wan, J.; Lu, X. H.; Hao, X. T.; Jen, A. K. Y.; Spiecker, E.; Min, J. 18.2%-efficient ternary all-polymer organic solar cells with improved stability enabled by a chlorinated guest polymer acceptor. Joule 2023 , 7 , 221-237..

Chang, Y.; Zhang, J. Q.; Chen, Y. Z.; Chai, G. D.; Xu, X. P.; Yu, L. Y.; Ma, R. J.; Yu, H.; Liu, T.; Liu, P.; Peng, Q.; Yan, H. Achieving efficient ternary organic solar cells using structurally similar non-fullerene acceptors with varying flanking side chains. Adv. Energy Mater. 2021 , 11 , 2100079..

Sun, R.; Wu, Q.; Guo, J.; Wang, T.; Wu, Y.; Qiu, B. B.; Luo, Z. H.; Yang, W. Y.; Hu, Z. C.; Guo, J.; Shi, M. M.; Yang, C. L.; Huang, F.; Li, Y. F.; Min, J. A layer-by-layer architecture for printable organic solar cells overcoming the scaling lag of module efficiency. Joule 2020 , 4 , 407−419..

Wang, T.; Sun, R.; Yang, X. R.; Wu, Y.; Wang, W.; Li, Q.; Zhang, C. F.; Min, J. A near-infrared polymer acceptor enables over 15% efficiency for all-polymer solar cells. Chinese J. Polym. Sci. 2022 , 40 , 877−888..

Shao, Y. M.; Sun, R.; Wang, W.; Yang, X. R.; Sun, C. K.; Li, Y. F.; Min, J. Low-cost organic photovoltaic materials with great application potentials enabled by developing isomerized non-fused ring acceptors. Sci. China Chem. 2023 , 66 , 1101−1110..

Zhang, W. Q.; Sun, C. K.; Angunawela, I.; Meng, L.; Qin, S. C.; Zhou, L. Y.; Li, S. M.; Zhuo, H. M.; Yang, G.; Zhang, Z. G.; Ade, H.; Li, Y. F. 16.52% efficiency all-polymer solar cells with high tolerance of the photoactive layer thickness. Adv. Mater . 2022 , 34 , 2108749..

Min, J.; Luponosov, Y. N.; Gasparini, N.; Richter, M.; Bakirov, A. V.; Shcherbina, M. A.; Chvalun, S. N.; Grodd, L.; Grigorian, S.; Ameri, T.; Ponomarenko, S. A.; Brabec, C. J. Effects of alkyl terminal chains on morphology, charge generation, transport, and recombination mechanisms in solution-processed small molecule bulk heterojunction solar cells. Adv. Energy Mater. 2015 , 5 , 1500386..

Yang, X. R.; Gao, Y.; Xu, L. Y.; Wu, X. H.; Chen, X. Y.; Shao, Y. M.; Xiao, B.; Liu, S. S.; Xia, J. L.; Sun, R.; Min, J. Efficient and stable all small-molecule solar cells enabled by incorporating a designed giant molecule acceptor. Energy Environ. Sci. 2024 , 17 , 5962−5971..

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Suppressing Syneresis in Poly(N-isopropylacrylamide) Hydrogels by Incorporating Poly(ethylene glycol)

Membranes of Amphiphilic Polyamide 1012 Prepared via Mixed‘Non-solvents’ Evaporation Induced Phase Separation

Competition of Composition Fluctuation Modes in Weakly Segregated Salt-doped Symmetric Diblock Copolymers

Effect of Phase Separation Size on the Properties of Self-healing Elastomer

Related Author

Hao-Dong Hu

Yu Kang

Jian Tang

Quan Chen

Xiang Liu

Jie Qiu

Yu-Ting Gao

Shuo Wang

Related Institution

School of Applied Chemistry and Engineering, University of Science and Technology of China

State Key Laboratory of Polymer Science and Technology, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences

University of Chinese Academy of Sciences

Beijing National Laboratory for Molecular Sciences, CAS Key Laboratory of Engineering Plastics, Institute of Chemistry, Chinese Academy of Sciences

Guangdong Provincial Key Laboratory of Functional and Intelligent Hybrid Materials and Devices, South China University of Technology

⁰