Poly(lactic acid) Nanocomposites with Improved Flame Retardancy and Impact Strength by Combining of Phosphinates and Organoclay

Ye Lei; Ren Jie; Cai Shen-yang; Wang Zhi-gang; Li Jian-bo

doi:10.1007/s10118-016-1799-z

Your Location：

Home >

Browse articles >

Poly(lactic acid) Nanocomposites with Improved Flame Retardancy and Impact Strength by Combining of Phosphinates and Organoclay

Papers | Updated：2022-02-21

- Poly(lactic acid) Nanocomposites with Improved Flame Retardancy and Impact Strength by Combining of Phosphinates and Organoclay
- Vol. 34, Issue 6, Pages: 785-796(2016)
- Affiliations：
  
  a.Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, School of Materials Science and Engineering, Tongji University, Shanghai 200092, China
  b.Institute of Nano and Bio-Polymeric Materials, School of Material Science and Engineering, Tongji University, Shanghai 201804, China
- Author bio：
  
  Jie Ren (任杰), E-mail: renjie6598@163.com
  Jian-bo Li (李建波), E-mail: lijianbo@tongji.edu.cn
- Funds：
  
  the National Natural Science Foundation of China;the Shanghai Automotive Industry Science and Technology Development Foundation
- DOI：10.1007/s10118-016-1799-z
  CLC：
- Received：27 December 2015，
  
  Revised：2016-;2-16，
  
  Published：2016-06
- Accepted：
Scan QR Code
Ye Lei, Ren Jie, Cai Shen-yang, et al. Poly(lactic acid) Nanocomposites with Improved Flame Retardancy and Impact Strength by Combining of Phosphinates and Organoclay[J]. 2016, 34(6): 785-796.
DOI：

Ye Lei, Ren Jie, Cai Shen-yang, et al. Poly(lactic acid) Nanocomposites with Improved Flame Retardancy and Impact Strength by Combining of Phosphinates and Organoclay[J]. 2016, 34(6): 785-796. DOI： 10.1007/s10118-016-1799-z.

摘要

Abstract

To minimize the loading level of the char-forming phosphorus based flame retardants in the poly(lactic acid) (PLA) with reduced flammability

we have developed the flame-retarded PLA nanocomposites by melt blending method incorporating organically modified montmorillonite (OMMT) and aluminium diethylphosphinate (AlPi) additives. The influence of AlPi and OMMT on flame retardancy and thermal stability of PLA was thoroughly investigated by means of the limiting oxygen index (LOI)

UL94 test

cone calorimeter

X-ray diffraction (XRD)

thermogravimetric analysis and scanning electronic microscopy (SEM). The experimental results show that the PLA/AlPi/OMMT system has excellent fire retardancy. The LOI value increases from 19% for pristine PLA to 28% for the flame-retarded PLA. Cone calorimeter analysis of the PLA/AlPi/OMMT exhibits a reduction in the peak heat release rate values by 26.2%. Thermogravimetric analysis and SEM of cone calorimeter residues indicate that OMMT significantly enhances the thermal stability

promotes char-forming and suppresses the melt dripping. The research of this study implies that the combining of the flame retardant and organoclay results in a synergistic effect. In addition

the flame-retarded PLA nanocomposite also exhibits notable increase in the impact strength and the elongation at break.

关键词

Keywords

references

K. Fukushima, , M. Murariu, , G Camino, , P. Dubois, . Polym. Degrad. Stab. , 2010 . 95 ( 6 ): 1063 .

J. Ren, , Z.H. Zhang, , Y. Feng, , J.B Li, , W.Z. Yuan, . J. Appl. Polym. Sci. , 2010 . 118 ( 5 ): 2650 .

Ren, J., "Biodegradable Poly(lactic acid): Synthesis, Modification, Processing and Applications", Springer Berlin Heidelberg, Berlin, 2010, p.54

P. Ding, , B. Kang, , J. Zhang, , J.W. Yang, , N. Song, , S.F Tang, , L.Y. Shi, . J. Colloid Interf. Sci. , 2015 . 440 46 .

D.M. Fox, , M. Novy, , K. Brown, , M. Zammarano, , R.H. Jr. Harris, , M. Murariu, , E.D. McCarthy, , J.E Seppala, , J.W. Gilman, . Polym. Degrad. Stab. , 2014 . 106 54 .

Q.F Wang, , W.F. Shi, . Polym. Degrad. Stab. , 2006 . 91 ( 6 ): 1289 .

H.J. Lin, , L.J. Han, , X.M. Wang, , Y.J Bian, , Y.S. Li, . Polym. Adv. Technol. , 2013 . 24 ( 6 ): 576 .

J. Deng, , S.W Zhu, , W.F. Shi, . J. Appl. Polym. Sci. , 2004 . 94 ( 5 ): 2065 .

X. Chen, , J Zhuo, , C. Jiao, . Polym. Degrad. Stab. , 2012 . 97 ( 11 ): 2143 .

X. Chen, , C. Jiao, , S Li, , J. Sun, . J. Polym. Res. , 2011 . 18 ( 6 ): 2229 .

D. Chen, , J Li, , J. Ren, . Polym. Int. , 2011 . 60 ( 4 ): 599 .

G. Tang, , X. Wang, , R. Zhang, , B.B. Wang, , N.N. Hong, , Y. Hu, , L Song, , X.L. Gong, . Ind. Eng. Chem. Res. , 2013 . 52 ( 22 ): 7362 .

G. Tang, , X. Wang, , W.Y. Xing, , P. Zhang, , B.B. Wang, , N.N. Hong, , W. Yang, , Y Hu, , L. Song, . Ind. Eng. Chem. Res. , 2012 . 51 ( 37 ): 12009 .

G. Tang, , X.J. Huang, , H.C. Ding, , X. Wang, , S.D. Jiang, , K.Q. Zhou, , B.B. Wang, , W Yang, , Y. Hu, . RSC Advances , 2014 . 4 ( 18 ): 8985 .

A. Lorenzetti, , S. Besco, , D. Hrelja, , M. Roso, , E. Gallo, , B Schartel, , M. Modesti, . Polym. Degrad. Stab. , 2013 . 98 ( 11 ): 2366 .

J.B. Dahiya, , N Kumar, , H. Bockhorn, . Fire. Mater. , 2014 . 38 ( 1 ): 1 .

E. Gallo, , U. Braun, , B. Schartel, , P Russo, , D. Acierno, . Polym. Degrad. Stab. , 2009 . 94 ( 8 ): 1245 .

U Braun, , B. Schartel, . Macromol. Mater. Eng. , 2008 . 293 ( 3 ): 206 .

A Ramani, , A.E. Dahoe, . Polym. Degrad. Stab. , 2014 . 105 1 .

S. Bourbigot, , F. Samyn, , T Turf, , S. Duquesne, . Polym. Degrad. Stab. , 2010 . 95 ( 3 ): 320 .

F Samyn, , S. Bourbigot, . Polym. Degrad. Stab. , 2012 . 97 ( 11 ): 2217 .

A. Vannier, , S. Duquesne, , S Bourbigot, , J. Alongi, . Thermochim. Acta , 2009 . 495 ( 1-2 ): 155 .

J. Alongi, . Fiber. Polym. , 2011 . 12 ( 2 ): 166 .

T.D Hapuarachchi, , T. Peijs, . Compos. Part. A-Appl. S. , 2010 . 41 ( 8 ): 954 .

M.F. Chiang, , M.Z Chu, , T.M. Wu, . Polym. Degrad. Stab. , 2011 . 96 ( 1 ): 60 .

P. Wei, , S Bocchini, , G. Camino, . Eur. Polym. J. , 2013 . 49 ( 4 ): 932 .

M. Murariu, , A.L. Dechief, , L. Bonnaud, , Y. Paint, , A. Gallos, , G. Fontaine, , S Bourbigot, , P. Dubois, . Polym. Degrad. Stab. , 2010 . 95 ( 5 ): 889 .

S. Solarski, , F. Mahjoubi, , M. Ferreira, , E. Devaux, , P. Bachelet, , S. Bourbigot, , R. Delobel, , P. Coszach, , M. Murariu, , A.D. Ferreira, , M. Alexandre, , P Degee, , P. Dubois, . J. Mater. Sci. , 2007 . 42 ( 13 ): 5105 .

K.C. Cheng, , C.B. Yu, , W.J. Guo, , S.F. Wang, . Carbo. Polym. , 2012 . 87 ( 2 ): 1119 .

X. Wang, , Y.A. Hu, , L. Song, , S.Y. Xuan, , W.Y. Xing, , Z.M Bai, , H.D. Lu, . Ind. Eng. Chem. Res , 2011 . 50 ( 2 ): 713 .

M. Zanetti, , G Camino, , R. Mulhaupt, . Polym. Degrad. Stab. , 2001 . 74 ( 3 ): 413 .

J.W. Gilman, . Appl. Clay. Sci. , 1999 . 15 ( 1-2 ): 31 .

A.B. Morgan, . Polym. Adv. Technol. , 2006 . 17 ( 4 ): 206 .

P Kiliaris, , C.D. Papaspyrides, . Prog. Polym. Sci. , 2010 . 35 ( 7 ): 902 .

A. Fina, , F Cuttica, , G. Camino, . Polym. Degrad. Stab. , 2012 . 97 ( 12 ): 2619 .

M., J. Polym. Sci. Pluta, . Part B: Polym. Phys. , 2006 . 44 ( 23 ): 3392 .

F.D. Kopinke, , M. Remmler, , K Mackenzie, , M. Moder, . Polym. Degrad. Stab. , 1996 . 53 ( 3 ): 329 .

H.L. Qin, , S.M. Zhang, , C.G. Zhao, , G.J Hu, , M.S. Yang, . Polymer , 2005 . 46 ( 19 ): 8386 .

B.M. Alexander, . Polym. Adv. Technol. , 2006 . 17 ( 10 ): 206 .

U. Braun, , H. Bahr, , H Sturm, , B. Schartel, . Polym. Adv. Technol. , 2008 . 19 ( 6 ): 680 .

U. Braun, , B. Schartel, , M.A Fichera, , C. Jaeger, . Polym. Degrad. Stab. , 2007 . 92 ( 8 ): 1528 .

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

DISPERSION OF GRAPHENE OXIDE AND ITS FLAME RETARDANCY EFFECT ON EPOXY NANOCOMPOSITES

Construction of Zinc Ion-reinforced Melamine Phosphate Flame Retardant for Synergistic Enhancement of Flame Retardancy and Energy Absorption in Ethylene-Vinyl Acetate Foams

Ingenious Engineering of Phosphorus and Nitrogen-enriched Nickel/Iron Bimetallic Phyllosilicates: Forging Multifunctional Epoxy Composites with Excellent Toughness, Self-lubrication, Wear Resistance and Flame Retardancy

Transparent UV-cured Phosphorus/Nitrogen Hybrid Coating for Simultaneously Enhancing Flame Retardancy and Surface Hardness of Polycarbonate

2026-9 Contents

Related Author

Zhou Wang

Xiu-zhi Tang

Zhong-zhen Yu

Peng Guo

Huai-he Song

Xu-sheng Du

Xian-Sheng Hong

Yu-Ying Zheng

Related Institution

Centre for Advanced Materials Technology, School of Aerospace, Mechanical and Mechatronic Engineering J07, The University of Sydney

State Key Laboratory of Chemical Resource Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology

Beijing Key Laboratory on Preparation and Processing of Novel Polymeric Materials, Department of Polymer Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology

School of Materials and Packaging Engineering, Fujian Polytechnic Normal University

College of Material Science and Engineering, Fuzhou University

⁰