doi:10.1007/s10118-021-2510-6

Citation: Sun, X.; Shi, W.; Zhou, X. Y.; Ding, S. Facile mechanochemical preparation of polyamide-derivatives via solid-state benzoxazine-isocyanide chemistry. Chinese J. Polym. Sci. 2021, 39, 573–584 doi: 10.1007/s10118-021-2510-6 shu

Facile Mechanochemical Preparation of Polyamide-derivatives via Solid-state Benzoxazine-isocyanide Chemistry

Oil & Gas Field Applied Chemistry Key Laboratory of Sichuan Province, College of Chemistry and Chemical Engineering, Southwest Petroleum University, Chengdu 610500, China

Corresponding author: Wei Shi, E-mail: shiwei80@swpu.edu.cn
Received Date: 2020-08-21
Available Online: 2020-10-14

Figures(11)

With the exploration of novel sustainable protocol for functional polyamides’ (PAs) construction as the starting point, herein, the small molecular model compound (M1-ssBIC) was prepared firstly by manual grinding of monofunctional benzoxazine (1a) and isocyanide (1b) via solid-state benzoxazine-isocyanide chemistry (ssBIC) to evaluate the feasibility of ssBIC. Linear PAs (P1-series polymers) were subsequently synthesized from biunctional benzoxazine (2a) and isocyanide (2b), and the influence of the loading of catalyst (octylphosphonic acid) (OPA) on the polymerization was investigated. Afterwards, two kinds of cross-linked PAs were successfully constructed via ssBIC by using trifunctional benzoxazine (3a) and cross-linked polybenzoxazine (4a) as reaction substrates, respectively, thus verifying the adaptability of ssBIC. Structural characterization indicates that amide, phenolic hydroxyl and tertiary amine substructures, with metal-complexing capability, have been successfully integrated into the obtained PAs. A type of representative PA/silver composite (P3-AgNPs) was prepared subsequently via in situ reduction treatment, and its application as recyclable reduction catalyst for organic pollutant p-nitrophenol (4-NP) was preliminarily investigated here to provide the example for possible downstream application of ssBIC. We think that this current work could provide a new pathway for the construction of functional PAs through facile and sustainable ssBIC protocol.
- Mechanochemistry,
- Solid-state synthesis,
- Benzoxazine,
- Isocyanide,
- Polyamide
1. [1]
  Wang, G. W. Mechanochemical organic synthesis. Chem. Soc. Rev. 2013, 42, 7668−7700. doi: 10.1039/c3cs35526h
2. [2]
  Braga, D.; Maini, L.; Grepioni, F. Mechanochemical preparation of co-crystals. Chem. Soc. Rev. 2013, 42, 7638−7648. doi: 10.1039/c3cs60014a
3. [3]
  James, S. L.; Adams, C. J.; Bolm, C.; Braga, D.; Collier, P.; Friscic, T.; Grepioni, F.; Harris, K. D. M.; Hyett, G.; Jones, W.; Krebs, A.; Mack, J.; Maini, L.; Orpen, A. G.; Parkin, I. P.; Shearouse, W. C.; Steed, J. W.; Waddell, D. C. Mechanochemistry: opportunities for new and cleaner synthesis. Chem. Soc. Rev. 2012, 41, 413−447. doi: 10.1039/C1CS15171A
4. [4]
  Friscic, T.; Jones, W. Recent advances in understanding the mechanism of cocrystal formation via grinding. Cryst. Growth Des. 2009, 9, 1621−1637. doi: 10.1021/cg800764n
5. [5]
  Gratz, S.; Beyer, D.; Tkachova, V.; Hellmann, S.; Berger, R.; Feng, X. L.; Borchardt, L. The mechanochemical scholl reaction—a solvent-free and versatile graphitization tool. Chem. Commun. 2018, 54, 5307−5310. doi: 10.1039/C8CC01993B
6. [6]
  Fulmer, D. A.; Shearouse, W. C.; Medonza, S. T.; Mack, J. Solvent-free sonogashira coupling reaction via high speed ball milling. Green Chem. 2009, 11, 1821−1825. doi: 10.1039/b915669k
7. [7]
  Hestericova, M.; Sebesta, R. Higher enantioselectivities in thiourea-catalyzed Michael additions under solvent-free conditions. Tetrahedron 2014, 70, 901−905. doi: 10.1016/j.tet.2013.12.029
8. [8]
  Cook, T. L.; Walker, J. A.; Mack, J. Scratching the catalytic surface of mechanochemistry: a multi-component cuaac reaction using a copper reaction vial. Green Chem. 2013, 15, 617−619. doi: 10.1039/c3gc36720g
9. [9]
  Dokli, I.; Gredicak, M. Mechanochemical ritter reaction: a rapid approach to functionalized amides at room temperature. Eur. J. Org. Chem. 2015, 2727−2732.
10. [10]
  Kean, Z. S.; Craig, S. L. Mechanochemical remodeling of synthetic polymers. Polymer 2012, 53, 1035−1048. doi: 10.1016/j.polymer.2012.01.018
11. [11]
  Li, J.; Nagamani, C.; Moore, J. S. Polymer mechanochemistry: from destructive to productive. Acc. Chem. Res. 2015, 48, 2181−2190. doi: 10.1021/acs.accounts.5b00184
12. [12]
  Chen, Z.; Mercer, J. A. M.; Zhu, X.; Romaniuk, J. A. H.; Pfattner, R.; Cegelski, L.; Martinez, T. J.; Burns, N. Z.; Xia, Y. Mechanochemical unzipping of insulating polyladderene to semiconducting polyacetylene. Science 2017, 357, 475. doi: 10.1126/science.aan2797
13. [13]
  Gratz, S.; Wolfrum, B.; Borchardt, L. Mechanochemical Suzuki polycondensation—from linear to hyperbranched polyphenylenes. Green Chem. 2017, 19, 2973−2979. doi: 10.1039/C7GC00693D
14. [14]
  Gratz, S.; Borchardt, L. Mechanochemical polymerization—controlling a polycondensation reaction between a diamine and a dialdehyde in a ball mill. RSC Adv. 2016, 6, 64799−64802. doi: 10.1039/C6RA15677K
15. [15]
  Troschke, E.; Gratz, S.; Lubken, T.; Borchardt, L. Mechanochemical friedel-crafts alkylation—a sustainable pathway towards porous organic polymers. Angew. Chem. Int. Ed. 2017, 56, 6859−6863. doi: 10.1002/anie.201702303
16. [16]
  Gratz, S.; Oltermann, M.; Troschke, E.; Paasch, S.; Krause, S.; Brunner, E.; Borchardt, L. Solvent-free synthesis of a porous thiophene polymer by mechanochemical oxidative polymerization. J. Mater. Chem. A 2018, 6, 21901−21905. doi: 10.1039/C8TA03684E
17. [17]
  Zhu, X.; Tian, C. C.; Jin, T.; Browning, K. L.; Sacci, R. L.; Veith, G. M.; Dai, S. Solid-state synthesis of conjugated nanoporous polycarbazoles. ACS Macro Lett. 2017, 6, 1056−1059. doi: 10.1021/acsmacrolett.7b00480
18. [18]
  Ohn, N.; Kim, J. G. Mechanochemical post-polymerization modification: solvent-free solid-state synthesis of functional polymers. ACS Macro Lett. 2018, 7, 561−565. doi: 10.1021/acsmacrolett.8b00171
19. [19]
  Ravnsbaek, J. B.; Swager, T. M. Mechanochemical synthesis of poly(phenylene vinylenes). ACS Macro Lett. 2014, 3, 305−309. doi: 10.1021/mz500098r
20. [20]
  Akther, N.; Phuntsho, S.; Chen, Y.; Ghaffour, N.; Shon, H. K. Recent advances in nanomaterial-modified polyamide thin-film composite membranes for forward osmosis processes. J. Membr. Sci. 2019, 584, 20−45. doi: 10.1016/j.memsci.2019.04.064
21. [21]
  Sum, J. Y.; Ahmad, A. L.; Ooi, B. S. Selective separation of heavy metal ions using amine-rich polyamide TFC membrane. J. Ind. Eng. Chem. 2019, 76, 277−287. doi: 10.1016/j.jiec.2019.03.052
22. [22]
  Yu, D. Y.; Wang, Y. J.; Wu, M. H.; Zhang, L.; Wang, L. L.; Ni, H. G. Surface functionalization of cellulose with hyperbranched polyamide for efficient adsorption of organic dyes and heavy metals. J. Clean Prod. 2019, 232, 774−783. doi: 10.1016/j.jclepro.2019.06.024
23. [23]
  Rajput, L.; Banerjee, R. Mechanochemical synthesis of amide functionalized porous organic polymers. Cryst. Growth Des. 2014, 14, 2729−2732. doi: 10.1021/cg500439f
24. [24]
  Yang, Y.; Bu, F. X.; Liu, J. J.; Shakir, I.; Xu, Y. X. Mechanochemical synthesis of two-dimensional aromatic polyamides. Chem. Commun. 2017, 53, 7481−7484. doi: 10.1039/C7CC02648J
25. [25]
  Li, G. L.; Ye, J. R.; Fang, Q. L.; Liu, F. Amide-based covalent organic frameworks materials for efficient and recyclable removal of heavy metal lead(II). Chem. Eng. J. 2019, 370, 822−830. doi: 10.1016/j.cej.2019.03.260
26. [26]
  Polindara-Garcia, L. A.; Juaristi, E. Synthesis of Ugi 4-CR and Passerini 3-CR adducts under mechanochemical activation. Eur. J. Org. Chem. 2016, 1095−1102.
27. [27]
  Shi, W.; Liu, Q.; Zhang, J.; Zhou, X. Y.; Yang, C.; Zhang, K. S.; Xie, Z. F. Tetraphenylethene-decorated functional polybenzoxazines: post-polymerization synthesis via benzoxazine-isocyanide chemistry and application in probing and catalyst fields. Polym. Chem. 2019, 10, 1130−1139. doi: 10.1039/C8PY01689E
28. [28]
  Zhang, J.; Shi, W.; Liu, Q.; Chen, T. L.; Zhou, X. Y.; Yang, C.; Zhang, K. S.; Xie, Z. F. Atom-economical, room-temperature, and high-efficiency synthesis of polyamides via a three-component polymerization involving benzoxazines, odorless isocyanides, and water. Polym. Chem. 2018, 9, 5566−5571. doi: 10.1039/C8PY01256C
29. [29]
  Yang, C.; Shi, W.; Chen, X.; Zhang, K.; Zhou, X.; Sun, X.; Ding, S.; Liu, S.; Xie, Z. Novel triphenylamine-based polyamides: efficient preparation via benzoxazine-isocyanide-chemistry at room temperature and electrochromic properties investigation. Dyes Pigments 2020, 176, 108206. doi: 10.1016/j.dyepig.2020.108206
30. [30]
  Rajkumar, C.; Veerakumar, P.; Chen, S. M.; Thirumalraj, B.; Lin, K. C. Ultrathin sulfur-doped graphitic carbon nitride nanosheets as metal-free catalyst for electrochemical sensing and catalytic removal of 4-nitrophenol. ACS Sustain. Chem. Eng. 2018, 6, 16021−16031. doi: 10.1021/acssuschemeng.8b02041
31. [31]
  Wang, M. W.; Jeng, R. J.; Lin, C. H. Study on the ring-opening polymerization of benzoxazine through multisubstituted polybenzoxazine precursors. Macromolecules 2015, 48, 530−535. doi: 10.1021/ma502336j
32. [32]
  Zhang, X. C.; Shi, W.; Chen, X.; Xie, Z. F. Isocyano-functionalized, 1,8-naphthalimide-based chromophore as efficient ratiometric fluorescence probe for Hg²⁺ in aqueous medium. Sens. Actuator B-Chem. 2018, 255, 3074−3084. doi: 10.1016/j.snb.2017.09.132
33. [33]
  Zhang, K.; Shi, W.; Yang, C.; Zhou, X. Diphenylmethane-based cross-linked polyisocyanide: synthesis and application as nitrite electrochemical probe and N-doped carbon precursor. J. Mater. Sci. 2020, 55, 5021−5037.
34. [34]
  Wang, P.; Xia, L.; Jian, R. K.; Ai, Y. F.; Zheng, X. L.; Chen, G. L.; Wang, J. S. Flame-retarding epoxy resin with an efficient P/N/S-containing flame retardant: preparation, thermal stability, and flame retardance. Polym. Degrad. Stab. 2018, 149, 69−77. doi: 10.1016/j.polymdegradstab.2018.01.026
35. [35]
  Zhang, W. C.; Li, X. M.; Yang, R. J. Study on flame retardancy of tgddm epoxy resins loaded with DOPO-POSS compound and OPS/DOPO mixture. Polym. Degrad. Stab. 2014, 99, 118−126. doi: 10.1016/j.polymdegradstab.2013.11.015
36. [36]
  Doidge, E. D.; Carson, I.; Tasker, P. A.; Ellis, R. J.; Morrison, C. A.; Love, J. B. A simple primary amide for the selective recovery of gold from secondary resources. Angew. Chem. Int. Ed. 2016, 55, 12436−12439. doi: 10.1002/anie.201606113
37. [37]
  Sangili, A.; Annalakshmi, M.; Chen, S. M.; Balasubramanian, P.; Sundrarajan, M. Synthesis of silver nanoparticles decorated on core-shell structured tannic acid-coated iron oxide nanospheres for excellent electrochemical detection and efficient catalytic reduction of hazardous 4-nitrophenol. Compos. B Eng. 2019, 162, 33−42. doi: 10.1016/j.compositesb.2018.10.084
38. [38]
  Zhang, K.; Shang, Z. K.; Wang, J. Y.; Wu, S. P.; Zhu, M. Y.; Li, S. J. Smart synthesis of silver nanoparticles supported in porous polybenzoxazine nanocomposites via a main-chain type benzoxazine resin. Chin. Chem. Lett. 2018, 29, 1367−1371. doi: 10.1016/j.cclet.2017.10.040
39. [39]
  Wang, R. L.; Li, D. P.; Wang, L. J.; Zhang, X.; Zhou, Z. Y.; Mu, J. L.; Su, Z. M. The preparation of new covalent organic framework embedded with silver nanoparticles and its applications in degradation of organic pollutants from waste water. Dalton Trans. 2019, 48, 1051−1059. doi: 10.1039/C8DT04458A
40. [40]
  Zhan, F. K.; Wang, R.; Yin, J. J.; Han, Z. S.; Zhang, L.; Jiao, T. F.; Zhou, J. X.; Zhang, L. X.; Peng, Q. M. Facile solvothermal preparation of Fe₃O₄-Ag nanocomposite with excellent catalytic performance. RSC Adv. 2019, 9, 878−883. doi: 10.1039/C8RA08516A
41. [41]
  Xue, Z. H.; Zhang, F.; Qin, D. D.; Wang, Y. L.; Zhang, J. X.; Liu, J.; Feng, Y. J.; Lu, X. Q. One-pot synthesis of silver nanoparticle catalysts supported on N-doped ordered mesoporous carbon and application in the detection of nitrobenzene. Carbon 2014, 69, 481−489. doi: 10.1016/j.carbon.2013.12.051
42. [42]
  Vinoth, R.; Babu, S. G.; Bahnemann, D.; Neppolian, B. Nitrogen doped reduced graphene oxide hybrid metal free catalyst for effective reduction of 4-nitrophenol. Sci. Adv. Mater. 2015, 7, 1443−1449. doi: 10.1166/sam.2015.2181
1. [1]
  Mohsen Hajibeygi , Khalil Faghihi , Majid Khodaei-Tehrani , Zeinab Mirzakhanian . Thermally Stable and Organo-soluble Polyamides Containing Triazine Rings and Ether Linkages in the Main Chain: Synthesis and Characterization. Chinese J. Polym. Sci, 2015, 33(1): 109-117. doi: 10.1007/s10118-015-1562-x
2. [2]
  Ming-ji Wang , Guang-cui Yuan , Charles C. Han . Influences of Hyperbranched Polyethylenimine on the Reactive Compatibilization of Polycarbonate/Polyamide Blends. Chinese J. Polym. Sci, 2015, 33(4): 652-660. doi: 10.1007/s10118-014-1475-0
3. [3]
  Xu-Lin Yang , Kui Li , Ming-Zhen Xu , Xiao-Bo Liu . Designing a Phthalonitrile/Benzoxazine Blend for the Advanced GFRP Composite Materials. Chinese J. Polym. Sci, 2018, 36(1): 106-112. doi: 10.1007/s10118-018-2033-y
4. [4]
  Yagoub Mansoori , Behzad Koohi-Zargar , Hemayat Shekaari , Mohammad Reza Zamanloo , Gholam HassanImanzadeh . POLYAMIDES WITH PENDANT 1,3,4-OXADIAZOLE AND PYRIDINE MOIETIES. Chinese J. Polym. Sci, 2012, 30(1): 112-121. doi: 10.1007/s10118-012-1092-8
5. [5]
  Ming-Xuan Li , Min-Zhi Rong , Ming-Qiu Zhang . Reversible Mechanochemistry Enabled Autonomous Sustaining of Robustness of Polymers—An Example of Next Generation Self-healing Strategy. Chinese J. Polym. Sci, 2021, 39(5): 545-553. doi: 10.1007/s10118-021-2532-0
6. [6]
  Cyprian Suchocki , Rafał Molak . Rheological Properties of Polyamide: Experimental Studies and Constitutive Modeling. Chinese J. Polym. Sci, 2019, 37(2): 178-188. doi: 10.1007/s10118-019-2180-9
7. [7]
  Wei-cheng Xiong , Li Chen , De-yi Wang , Fei Song and Yu-zhong Wang . SYNERGISTIC EFFECTS OF NOVOLAC-BASED CHAR FORMER WITH A PHOSPHORUS/NITROGEN-CONTAINING FLAME RETARDANT IN POLYAMIDE 6. Chinese J. Polym. Sci, 2012, 30(1): 72-81. doi: 10.1007/s10118-012-1100-z
8. [8]
  Yuan Yuan , Yu-lan Chen . Visualized Bond Scission in Mechanically Activated Polymers. Chinese J. Polym. Sci, 2017, 35(11): 1315-1327. doi: 10.1007/s10118-017-2002-x
9. [9]
  Li Zhou , Zhi-qiang Jiang , Na Xu , Na Liu , Zong-quan Wu . Polythiophene-block-poly(phenyl isocyanide) Copolymers:One-pot Synthesis, Properties and Applications. Chinese J. Polym. Sci, 2017, 35(12): 1447-1456. doi: 10.1007/s10118-017-2003-9
10. [10]
  . SYNTHESIS AND CHARACTERIZATION OF ORGANOMONTMORILLONITE AND POLYAMIDE 66/MONTMORILLONITE NANOCOMPOSITES*. Chinese J. Polym. Sci, 2002, 20(6): 551-557.
11. [11]
  ZHANG Hongfang , YANG Baoquan , MO Zhishen . THE INFLUENCE OF HEAT TREATMENT ON STRUCTURES OF THE AGGREGATED STATE OF POLYAMIDE-1010*. Chinese J. Polym. Sci, 1996, 14(4): 318-323.
12. [12]
  Yong-jin Peng , Chen-ting Cai , Rong-chun Zhang , Tie-hong Chen , Ping-chuan Sun , Bao-hui Li , Xiao-liang Wang , Gi Xue , An-Chang Shi . Probing the Two-stage Transition upon Crossing the Glass Transition of Polystyrene by Solid-state NMR. Chinese J. Polym. Sci, 2016, 34(4): 446-456. doi: 10.1007/s10118-016-1762-z
13. [13]
  YANG Guang , CHEN Qun , WANG Yuanshen , YANG Changzheng , WU Xuewen . SOLID-STATE VARIABLE-TEMPERATURE NMR STUDY ON THE PHASE SEPARATION OF POLYETHER POLYURETHANE ZWITTERIONOMERS*. Chinese J. Polym. Sci, 1994, 12(4): 302-308.
14. [14]
  Yu-ling He , Yi-lan Guo , Rui He , Tian-xiang Jin , Feng Chen , Qiang Fu , Nan Zhou , Ji Shen . Towards High Molecular Weight Poly(bisphenol A carbonate) with Excellent Thermal Stability and Mechanical Properties by Solid-State Polymerization. Chinese J. Polym. Sci, 2015, 33(8): 1176-1185. doi: 10.1007/s10118-015-1667-2
15. [15]
  Nicolau Molina Bom , Érik Oda Usuda , Mariana da Silva Gigliotti , Denílson José Marcolino de Aguiar , William Imamura , Lucas Soares Paixão , Alexandre Magnus Gomes Carvalho . Waste Tire Rubber-based Refrigerants for Solid-state Cooling Devices. Chinese J. Polym. Sci, 2020, 38(7): 769-775. doi: 10.1007/s10118-020-2385-y
16. [16]
  William Imamura , Érik Oda Usuda , Lucas Soares Paixão , Nicolau Molina Bom , Angelo Marcio Gomes , Alexandre Magnus Gomes Carvalho . Supergiant Barocaloric Effects in Acetoxy Silicone Rubber over a Wide Temperature Range: Great Potential for Solid-state Cooling. Chinese J. Polym. Sci, 2020, 38(9): 999-1005. doi: 10.1007/s10118-020-2423-9
17. [17]
  YAN Xin , HU Jianzhi , YAO Shuren , YE Chaohui , ZHANG Baozhen . SOLID-STATE HIGH RESOLUTION NMR STUDY ON POLY (2, 6-DIMETHYL-1, 4-PHENYLENE OXIDE). Chinese J. Polym. Sci, 1995, 13(3): 252-258.
18. [18]
  Jian Huang , Ling Shen , Hui Zou , Na Liu . Enantiomer-selective Living Polymerization of rac-Phenyl Isocyanide Using Chiral Palladium Catalyst. Chinese J. Polym. Sci, 2018, 36(7): 799-804. doi: 10.1007/s10118-018-2136-5
19. [19]
  M. Selvi , S. Devaraju , K. Sethuraman , R. Revathi , M. Alagar . Cyclotriphosphazene Fibre Reinforced Poly(benzoxazine-co-e-caprolactam) Nanocomposites for Flame Retardant Applications. Chinese J. Polym. Sci, 2014, 32(8): 1086-1098. doi: 10.1007/s10118-014-1479-9
20. [20]
  Qing-quan Yang , Zhao-xia Guo , Jian Yu . COMPARISON OF POLYAMIDE 66/MONTMORILLONITE NANOCOMPOSITES PREPARED FROM POLYAMIDE 6 AND POLYAMIDE 66 BASED MASTER-BATCHES. Chinese J. Polym. Sci, 2008, 26(6): 689-696.

Get Citation

PDF

XML

Article Metrics

PDF Downloads(2)
Abstract views(520)
HTML views(261)
Cited By(0)

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142